ATR 72 & 42 Tutorial 4: Engine Start, Push/Powerback, Taxi | Real Airline Pilot
Vložit
- čas přidán 31. 07. 2024
- Join my channel!
/ @a330driver
If you don't want to join, but still support me consider a small donation:
www.buymeacoffee.com/737NGDriver
And if you really love the videos, consider becoming a Patron:
/ 737ngdriver
Join my Discord Server!
/ discord
My system specs:
Intel i9-9900k@5,2GHz
RTX3080Ti
32GB RAM
Windows 10 Pro
My hardware:
Thrustmaster Boeing Yoke
Thrustmaster HOTAS Warthog
Thrustmaster Pendular Pedals
Honeycomb Bravo Throttle - Hry
Thank you so much for your content! Just a little contribution of personal experience. I live near the GCXO airport, and I fly frequently from it, but I have never seen an ATR use a pushback. It is very common for them to use the power back here!
Timestamps for myself:
*------ Powerback or Pushback? **2:06** ------*
NoseWheel Steering ON
Hydralic pump PRESS
Propeller Brakes OFF
Engine Stab - Condition Lever 2 AUTO - 3:10
Probe Heat ON - 3:50
Anti Ice Nec
Flaps - 15
*------ Engine 1 Start **4:34** - **5:20** ------*
ENG START - A&B
ENG 1 START
Above 10 % - Condition Lever 10 FEATHER
ENG Stabel - Condition Lever AUTO
Trans - ON
ENG START - OFF
*------ Before Taxi **6:06** ------*
ATC Clearence
Taxi Lights - ON
*------ Pushback and Taxi **6:55** - **11:20** ------*
HDG - NAV - IAS 2x - 9:34
*------ Before TakeOff **12:20** ------*
Speed Lock - Release
TCAS - Auto
Trans - ON
ALT OFF - OFF
Weather Radar
*Lineup Clearence*
Landing Lights ON
Strobe Lights ON
Logo Lights - IF DARK
Synchronize Heading - 14:09
*LINEUP RUNWAY*
I really likes your videos and all the detailed explanation, I'm doing my ATPL and it helps a lot for sure. Thank you for the time invested for making better pilots out there, in the real world
Thank you so mutch for those tutorials so short after release!
Really great to have a professional instrucktion for your first flights :)
So good that you've done this series, thank you.
I did follow the tutorial but for some reason Hyd Greel Lo Pr and blue remain at fault as it is the ACW Gens remain off. What am I doing wrong?
great series!
Nice video using correct procedure for engine start...hopefully other simmers can learn from this video ..note.. there are two idle positions..FI & GI..latter is generally used for taxi..
With the new update of GSX the pushback in hotel mode is possible. At least it worked today.
Great video. Do you use the 2020 cameras? I don't know how to get the movement into the cockpit, zoom, overhead panel and so forth. Thanks
Isn’t there a setting within the gsx control panel that allows you to start an engine before the pushback? I feel like they added the feature after majestic released their dash 8 for P3D all those years ago….and it was carried over to MSFS.
In your video you don't see the standard MSFS pusher and GPU. How did you do that? Normally you can hide them in the aircraft config file, but I can't find this file in the ATR folders.
Why is it after I disconnect the ground power unit after en engine is started I get all of these fault lights and messages?
Hi Emanuel i really like your tutorials on these pretty complex aircrafts but when the throttles are in idle mode i lose all the hydralics and many warning messages and fault lights come on. Do you happen to know why this happens. When the throttles are not in idle everything works just fine.
Nose Wheel Steering!!! I was losing my mind why I could not steer . . .
I did everything like in the tutorial, but I have always the Hyd Green Lo and the Hyd Blue Lo warnings... Also after engine start the acw won´t start... Can somebody help?
What are necessary conditions for gust lock to be released. In this video instructor just "clicks" on it and it pops off. I have clicked on it a hundred times. It illuminates to show it's selected, but doesn't budge. That makes me think that some pre-condition is unmet?? What would that be?
hello Sir , great info and vid as always , 🙂 but the FMs in this aircraft is totally messed up 😞freeze after freeze not acceptable in my view as its a major part of the aircraft , this really needs urgent attention 😞
Thanks for these videos! What scenery addon did you use for Tenerife North?
Thanks! MK Studios.
You can do powerbacks with the 737 and/or a320. Not recommended but it is possible.
You *can* also fly them 50kt over the red line. Not recommended, but possible.
See the issue?
tried the powerback earlier today but it did not work for me. the aircraft started moving forward
Same.it started to reverse then moved forward
I wonder why the T/O config ok light lit up while the gust lock was still engaged? Further, all the other planes I've "flown" call for gust lock disengagement already in the before taxi checklist.
Looking into the FCOM it seems the gust lock should be part of the takeoff config test indeed. Be sure to submit a bug report!
I disengaged the gust lock at the moment where the FCOM normal procedures asked for it.
@@A330Driver I'll file an issue; though I don't own the ATR (yet, waiting for the Trall first).
Btw, what is the situation with gust locks anyway - why do some planes have them as a switch and some planes not? (I guess the B73 and A32 still have them in the form of pins and locks outsite? Maybe this is even worth a video ;)
Model is completely broken! When i'm trying to start the engine - nothing happened. No warning about start fail or smth like that at all, but engine just don't starting. Once I restart sim and do exactly the same - it works
I never had that yet. Did 20 flights with it and never had trouble starting the engines.
@@A330Driver Strange, I think, I need to reinstall it. Because on the first flight it was ok, but when I ended turnaround and came back to starting in Hotel Mode, it is just not responding. I’ve tried everything: From reconnecting GPU to trying manual ignition, nothing happened. And the most strange part is no warning on ECAM has appeared. I think it is just a bug, but now to avoid it, I’m just staying in hotel mode for full turnaround