DIY Farmhouse Coffee Table with Storage
Vložit
- čas přidán 25. 06. 2024
- In this video, I am going to show you how to build a DIY farmhouse coffee table completely out of 1x6 (onebasix) spruce lumber. This woodworking project uses pocket hole joinery to keep it approachable for beginners. I have these DIY coffee table plans available, linked below. This is a beautiful DIY coffee table with storage that most people can build with basic woodworking tools. Building a coffee table this size can seem intimidating at first, but you can do it! You can build your own using this how to build a coffee table video guide along with the woodworking plans. I love building new woodworking projects that are approachable by most anyone, even beginners. It is an awesome feeling as a beginner woodworker to build a coffee table like this and know you did it. This DIY farmhouse style coffee table features a bottom shelf and X brace detail on each end. You can leave the X brace off if you prefer. The bottom shelf gives you much needed extra storage in your living room. I would like to think Delta Power Equipment Corporation for sponsoring this video.
Download Plans for This Coffee Table
www.731woodworks.com/store
Videos To Watch Next
Different Style Coffee Table: • Chunky Farmhouse Coffe...
Jointing With A Table Saw: • Jointing with a Table Saw
How To Build A Table Top: • How to Build a Wood Ta...
HomeRight Paint Sprayer Review: • HomeRight Paint Spraye...
How To Use Pre-Stain Conditioner: • Watch This Before Buyi...
Delta Cruzer Unboxing: • Delta Cruzer 26-2251 1...
Tools Used In This Build
Delta Cruzer from Amazon: amzn.to/2SArspN
Delta Cruzer from Home Depot: go.magik.ly/ml/10tep/
Wahuda 8” Jointer: amzn.to/2SBQ2GM
DeWalt Orbital Sander: amzn.to/3izuMfq
HomeRight Paint Sprayer: amzn.to/2F9bKPi
Palm Router: go.magik.ly/ml/114ud/
Kreg K5 Pocket Hole Jig: amzn.to/30I6yt8
Kreg Face Clamp: amzn.to/3ntJ1WD
Cheap Quick Clamps: amzn.to/30JJ7Qn
Swanson Combination Square: amzn.to/34BFME2
Swanson Straight Edge: amzn.to/3jKtD68
Framing Square: amzn.to/2GrDO1e
1/8” Straight Bit: amzn.to/3d8gDEL
Supplies Used In This Build
Table Top Fasteners: amzn.to/33JiAop
Pre-Stain Conditioner: amzn.to/3jKtZtu
Minwax Dark Walnut Stain: amzn.to/3jT5SsR
Varathane Polyurethane: amzn.to/3loXeSW
Titebond Wood Glue: amzn.to/36KU1Jo
1 ¼” Pocket Screws: amzn.to/3lkuRFF
120 Grit Sandpaper: amzn.to/30IPKm9
T-Shirts and Merch: teespring.com/stores/731-wood...
I use TubeBuddy to help grow this channel and you can too by using affiliate code 731woodworks at this link www.tubebuddy.com/731woodworks
Get two FREE audio books from Audible by using this link: amzn.to/3cqvgmv I listen to a lot of books while woodworking. Give it a try, you may love it as much as I do!
Camera Equipment Used for Videos
Canon M50 amzn.to/3en9EaQ
Canon 22mm Lens: amzn.to/32fp79w
Microphone I Use: amzn.to/3crbxTX
Visit the website for official coffee mugs, shirts and more merchandise: teespring.com/stores/731-wood...
0:00 Intro
1:30 Starting Coffee Table Build
1:45 Cutting Legs for the Coffee Table
3:18 Delta Cruzer Overview
4:41 Coffee Table Layout
6:38 Cutting Out Coffee Table Aprons
7:02 Drilling Pocket Holes
8:48 Coffee Table Frame Assembly
11:46 Braces for Coffee Table
16:06 How To Fix a Wobbly Table
17:04 How To Cut X Braces for Table
20:56 How To Build a Top for a Coffee Table
26:05 How To Install Table Top Fasteners
27:48 Squaring Up the End of the Table Top
29:14 Staining The Coffee Table
29:47 Installing the Top On the Coffee Table
32:25 Showing My Mistakes
34:27 Outro
Disclaimer: Amazon and other Affiliate links are used in this description and they help support this channel.
#woodworking #farmhouse #diy - Jak na to + styl
Check out my other coffee table build videos here: czcams.com/video/BnWM9GSG_oM/video.html
Keep posting videos they got me to try wood working and I absolutely love it. I just hate I picked it up as a hobby when lumber cost are so high.
Can you please make a video for "third graders" lol on how to use a bosch palm router? From what bit to buy and why , how to install it , which one to choose from and why , do you start it first and than put it on the wood or put it on the wood and than start the router , the best speed , if accessories from bosch are needed/why and where to buy. Sorry for the lengthy question lol and if you already have this video I have not yet found it :). Thank you in advance.
Fixin to get me some wumbasix's!
Awesome
Finna lol
🤣🤣🤣 love this
I'm glad you show the mistakes... I'm always my worst critic and it slows me down.
We are our own worst enemy at times
Thank you for point out your flaws. I can never stop myself for beating myself down when my work has flaws. This makes me feel a little better that someone like you, who creates so many beautiful items, can make mistakes as well. Thank you!
Glad it helps
I’ve had a raised corner a time or two in table tops. I was told it was my clamping pressure and pocket holes pulling the same direction. Ever heard of this? Anyway since I changed up alternating pocket hole direction and clamp pressures, the tops lay flat. And yes, I always edge cut my boards
Thanks
I build wine cabinets and cellars for very wealthy clients and do, not detailed, but very nice work and I’ll tell you right now I use pocket holes for a lot of different things
I've been on a 731woodworks binge watching for 2 days and still am not tired of your videos lol
lol thanks 👊
I'm already commenting that the video will be good. They always are. Great job Matt.
I appreciate that!
Do you prefer oil or latex paint
Water based. I use Sherwin Williams Pro Classic
Just found your channel. Loved this build. Also noticed your tee-shirts and wanted to say ... Amen!!!
Dude your smile when u put the bottom table top said it all...Great video
.
lol happy happy happy
Hi Matt. You are the best of the west , beast of the east , mouth of the south and worth of the north. Lol. I have learned a lot from you. Please explain how you determine the angle of the crosses. Perhaps you should dedicate a video elucidating the process. I appreciate the time you take to open a new world to people like me. Thanks.
There's a video by Go Build Stuff called how to find angles that is suuuuper helpful!
Kreg makes pocket hole plugs that work great. Glue 'em in, sand em off. Done!
for sure
Oh I didn't know they made them thanks! Finally got my first Kreg 320
You're a good person, Matt. Stay safe in the shop and out there on the road. From one pocket hole aficionado to another, take care and enjoy life. 🤠
You make tables WAY better than me so thank you for showing me how. I use tree round sections cause of where I live and they are free. Legs are tree pieces. Elec. Co . trims trees from Wires we take the what they leave. People give them to me and I appreciate it, use them
Hi Matt , i just bought your plan. gonna built this for my daugther , she wants his own table to play in the basement. Thank👊🏻👊🏻from Montreal ,Canada
Awesome thank you 👊🏻
Man you are such an inspiration and I'm from South Africa so the only thing I struggle with is converting from imperial to metric but otherwise I love your videos and your projects
Love watching your videos. Stay being awesome and thanks for always being positive.
Thank you Matt! You are an inspiration! I truly consider you a mentor.
I appreciate the kind words
It's so cool to see your production quality come a long way from when you started.
Always useful and fun to watch!
Thank you
You are the best, love watching your channel, the authenticity you have is awesome. I really like how your whole process is very clear and you are using tools most wood workers can afford, and I totally appreciate your humor. Thank you !
Beautiful work Matt. God bless you brother!
Gorgeous!!
Good job Matt. You are one of the 3 that do binge watch and actually can't wait for your next video
Wow, thanks!
I have to tackle this project head on.....even living in an apartment isn't going to stop me.
One thing I want to try an incorporate into the design is some "hidden drawers" or some type of "hidden compartment".
I have been watching so videos of old 16th, 17th, and 18th century writing tables. One thing that they all had in common, besides the amazing hand carved designs, is thatthey all had hidden compartments or drawers.
I'm just fascinated with the idea of pressing part of a table, and a hidden drawer pops out.
I love my harbor freight Pittsburgh clamps. They may not have fancy features but boy do they get the job done. I dont know of any clamps that even compete with them for value/price.
You're So Smart! I'm 58 so when I grow up I want to be just like you.
lol, I'm not so smart. My wife is though :)
@@731Woodworks See... You know what's good for you 🤣
lol
I truly enjoy you simple approuch to woodworking. And the southern english makes me feel right at home.
Very nice work. You will be my Mr. Mentor for sure. Great hobby and side work to have. I believe I'll blow the " dust " & webs off my tools and get busy after this freeze here in Dallas. Thank you sir for your WISDOM
Go for it
Almost done making this table, looks fantastic!
Awesome!
Beautiful table
Thank
I love how you explain things, it makes it very easy to follow along and easy to understand. Nice and laid back very nice build
Thank you
I like your table. Thanks for showing me that
You have inspired me to build this for our house. It looks great and I very much appreciate the videos. Please keep em coming!
Awesome. Keep me posted on how it turns out
Matt, love these videos! Especially the mistakes part we ALL do it! However you said it well... when you stain it it just looks natural. I use a pocket hole to hold my table tops down. Have a good one and God Bless!
Thank you
Wonderful video Matt, I really appreciate how you explain things ( like setting up the hand router ), not many take the time to do that. I think your videos will challenge me to step up the projects I am working on. God bless you Matt.
Thank you
I thank you Matt Outlaw for all you have done for our country. I thank you for what you keep doing for me on every video. I've made your Farmhouse style tables and am selling them well. You are still a Hero brother.
That’s great to hear you are having success with the tables 🎉
Matt, you out did yourself! This looks amazing and so much better than the inspiration piece. I’m sure the customer was over the moon. Hubby and I are going to give this one a try. Fingers crossed! BTW, we have taken up wood working as a hobby we do together mostly due to you. Your way of teaching and encouragement has been a blessing for us. Thank you so much!
Great to hear. Thanks
Nice work! Always appreciate the honesty pointing out the little flaws
Thank you
Love it, definitely will be making this coffee table.
Thank you
Love your farmhouse table it's a very simple yet elegant design awesome job keep it up!
Your videos just keep keeping getting better! Love the project but really like all the tips and information on construction. Very useful information for this beginner. 🤜🏻. God bless you!
Thanks 👊🏻
Just finished frame and just cut my lower shelf, glued and pocketed. Gonna Preston and stain tomorrow then doing the top the same way. Awesome videos, you made me think I can build this and I can. Joined the shelves with your level technique. Most amazing part so far...it perfectly square
I make wood items to sell and I've been wanting to do coffee tables affordable to build and buy and I know this would sell like crazy. Good stuff!
Looking forward to this video brother Matt
Thank you
Awesome build! I know what I'm building this weekend. Thanks Matt for another great project!!!!
Awesome. Share pics if you build it!
Yes this video is what I needed help on the X brace thanks 731 wood works.
Glad it helped
I have been using your method to straighten the boards on the table saw with the level and it makes a big difference! Thank you.
You're welcome
I really liked how you drew a light pencil line down the back side of the top indicating how they (planks) were to be aligned and knew when you put them back together that they would be in the right place. Really smart!
Thank you
Awesome man. Your uploads have given me confidence to start selling my projects
Absolutely beautiful 🫡
Really enjoy your display of pride in your work
Thank you
Purchased your plans a few days ago and already have one built. Awesome job on the plans. I also bought a few other plans from your website as well. Much respect for you.
Awesome, thank you!
Thank you for sharing your experience and knowledge with everyone who follows your work. I myself am starting to feel more confident in my abilities to do what I love,wood working!! And you have so inspired me to take that step and started posting and selling my work.again thank you may you and your family receive the blessings of our gracious savior 🙏
Loving the channel bro ! Brand new wood worker here, built my first entry/console table a few days ago and it's imperfect ! Lol but the satisfaction of building it was worth the effort. I'm currently using manual tools to cut and sand and fasten but hopefully I can make some money with these first few projects to invest towards power tools ! Been watching and learning from a ton of videos on CZcams and yours are definitely helpful ! More power to you 👊🏽
Great job. Thank you for sharing. Turned out awesome!!!!!
Thank you
Remodeling my kitchen with new gray cabinets, white marblish countertop with gray veining, and white subway tile backsplash with gray grout. Thinking I’ll build one of these tables for living room next to dining room & kitchen, with wood painted to match cabinets and a tile top to match kitchen backsplash. Might also do a dining table to match, though I’m a bit uneasy about doing a tile top for a dining table.
Beautiful build, cant wait make this once I buy my first house!
You really take the fear out of wood working, love it 🤙🏼
Thanks 👊🏻
Great video!!! Love the design and the common wood use. I followed your design on a chunky coffee table a while back.
Awesome! Thank you!
Awesome video like always! Just discovered your page yesterday and have already watched 3 of your builds. Great stuff and God bless.
Awesome. Thank you
This dude is bad ass.. AMAZING WORK!
Thank you
Nice job Matt....I always look forward to your vids...keep' em coming.
Thanks 👍
CLICK THE BOX!!!!! Another great video. Growing up in Oklahoma everyone knows what a tubafour is.
👊🏻 thanks
As we are getting ready to move into a new place and we don't have a coffee table, I think i'll be looking very closely at this one to see about building it for the new place, can't wait to see it all come together.
Thanks! There’s a matching end table build coming soon!
Anyone who gave this a thumbs down thinks IKEA is quality furniture.
Man!! You should do a “customer pick up” video! Or even a customer ordering a custom piece and show the steps on how you come up with measurements from a picture. Customer interaction. That would be cool.
Thank you.. It would be neat
Looks great
Perfect timing... looking for another project!
Great to hear!
Yes!!
You have inspired me! I made stealth shelves for my children for Xmas and made my wife a coffee table with lift top. I’m going to try selling! I’m having a blast!
Awesome
Awesome build...like the idea of using 1x6's.
Thank you
I look forward to these thank you
👊🏻
Great job, Matt. This is a beautiful table. I enjoyed watching you build it.
Glad you enjoyed it
I happened across one of your videos last night. You do such great work and I'm hooked!! I'm not a woodworker but was in carpentry for about 15 years and would love to custom make, well....ANYTHING!!
Great work I like the fact that you admit your mistakes love your work and your accent 😊
Thank you! 😃
I really like your videos. They are informative without going off on some other subject and you loose track of what you are doing. I have a couple clamps that you attach to a piece of plywood and the board gets attached to the clamps. Then you do the level type cut. Your level idea seems easier and quicker.
Glad you like them!
Love your videos brother! You definitely explain things perfectly. I plan on making me some great looking farm style décor this spring and summer. Thanks for all you do to inspire and help all of us "amateurs" hahaha!
Thank you
Thanks Brother For his Knowledge ,, I'm From Indonesia .
Welcome!!
Matt what cool build. Thanks for sharing all tips and tricks. Bought lumber yesterday to build a three section farmhouse desk. It will be my first attempt but with what I’ve seen on here it should be a great success. 👊👊
Thanks. Go for it 👊🏻
Fantastic work! Great video and very thorough instructions. Great job!
Thank you
Cant wait!
Thanks
Thumbs up before watching... Checking in from the 876 area code🔥
Hope you enjoyed it!
@@731Woodworks yup!
This project came out great! I made a similar style table for my fiancé over the weekend using 2x4s and dowels and a piece of glass that she already had, it came out awesome!
Nice!
I really enjoy watching your videos and tutorials. I'm saving up to get me some basic tools and in the process of getting a small shed to transform it into my workshop. Keep up the great work.
Awesome, thank you! Good luck on your woodworking!
@@731Woodworks thanks. I know this doesn't have anything to do with wood wrk but what type of boots are your wearing?
Great video , ! You give confidence to beginners like myself ! Thanks
Thank you 🙏🏻
You can improve the rigidity of those budget Harbor Freight clamps by ripping a piece of 3/4 plywood or MDF about an inch shorter than the clamp length and wedge it in the hollow cavity.
I’ve saw a video on that.
Thank you for the videos . Really helped me in my work.
Glad they help!
That was ridiculously informative. Thank you
Glad it was helpful!
New sub as of yesterday, and man. I love your videos. You go above and beyond with your annotation and explanations. Way better quality than so many of the woodworking channels out there. Solid stuff, man. Great video again.
I appreciate the kind words
Thank you sir love this channel it’s my favorite channel for woodworking
Thank you
Like that Delta Cruzer
Thank you
Thank you so much for the stove cover idea I sold 6 so far a little different than yours I bought handles and I got 10 more orders and a few custom orders and I pitched the idea of making them for my job because they sell homes and I’m waiting to hear back I got lots of work for my little side business now i really appreciate you and now my family can make it because I was struggling to pay rent but with gods help this is going to work out great thanks again
I think I am going to have to try this one!
Go for it
Great Job!! the little flaws just add character!!
Thanks!
Nice job!!!!. That Delta Miter saw you have there, is awesome!!!
I'm waiting for the end tables cant wait for the video
Thank you
Who are the three idiots who gave this a thumbs down? 😕 great work and excellent explanation. Waiting patiently for the side table. 👍
Thank you
Love it! Awesome job!!
Thank you
Kenny Chesney now building furniture in COVID Era. Haha. I’m now just finding your videos and enjoy them.
Thanks!
Man I’ve mad a few work benches and sold them. My everyday job doesn’t give me the same satisfaction I get when building something for someone. So I do want to make this a business. The awesome thing I feel I could take advantage of is the fact that there is a building boom Going on right now in my area, and those end tables look like a good start.
It’s a good time to build
I just built a end table similar to that for a client. The Xs on the end I used Titebond quick set and a couple of quick clamps for a minute or two and it worked great. Didn't need the brads.
I’ll have to check that out. Thanks
Great coffee table!
Thank you
Wow absolutely beautiful I’m jealous I can’t even use a drill 💕