Installation of a smart carb on the Yamaha Aerox Ep: 8
Vložit
- čas přidán 27. 02. 2022
- We are working with @SmartCarbFuelSystems on the Sherco so we got a couple for us to test out on some projects. The aerox is one of them. Brandon breaks down the basics on the smart carb so you can understand the Simplification and how these are worth every penny!
Get the video likes up, and Subscribe we will do more frequent giveaways!
WE HAVE A APP!!! Get notifications about specific items and more!
IOS:
apps.apple.com/us/app/scooter...
google play:
play.google.com/store/apps/de...
Support your USA shops!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM
For all marketing, advertising, collaborations, or sponsorship info.
Email Patrick: Pat@scooterswapshop.com
Send Mail/ promo items to:
Scooterswapshop
ATTN: Mail time Patrick
5807 Se Johnson Creek Blvd.
Portland OR, 97206
#SMARTCARB #yamahaaerox #Aerox
PLEASE LIKE SHARE AND SUBSCRIBE! Make sure to click notifications to keep up to date on the latest and greatest happenings. ALL parts come from our shop in Portland, Oregon!
Thank you for your support!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM - Auta a dopravní prostředky
Your production keeps getting better and better 🔥
Appreciate that
What an absolute monster.
yeah this isnt event completed but close
I flipped the intake 180 degree on a 8.1 carter i built for a friend as there is a little angle on it and it gave much more room between the tyre and carb ;)
that would make it horizontal
@@Scooterswapshop Not at all ;) try it hehe
@@ramshojracing lol
@@Scooterswapshop you know you can just put a spacer plate in between your intake and block
Hey Patrick, your show is top notch! I know I'm small beans but have two questions. I'm building a 70cc race kit bike. So far billet bottom end from Smolik performance and suitable crank and bearings that will take 12k to 13k rpm. The cylinder I'm rocking is70cc vertical MHR the one with the bridge port exhaust. I have already reached out to the guys at Smartcarb and no response.
What size smartcarb should I install on this racing build? Second question if you have the time....which pipe would best suit this MHR racing cylinder? Price doesn't matter as I will spend the money for quality, speed, and performance.
This is some serious good content
thanks! did you subscribe?
@@Scooterswapshop yes I did, keep up the great work!
How much clicks leaner did u go from factory based setting?
Can i put this on a smaller block like a 50cc sport mallosi block ? 🧐
Would love to see you guys do a build serious on a piagio zipp 👀
Time to try the Super X carb from STIC SuperTorque. It looks and weighs like a PWK. The inventor told me a CR500 at the World drag race Nats took their class and placed 2nd in the 70cc class. Small bores get low end like an electric motor and the HP boost to the top comes in 1.5k RPM sooner and tags an extra 1k RPM after. So a very broad and aggressive powerband. I can't compare my SC to the Super X, that comparison makes sense with PWK vs SC. More apples to apples. Just a heads up on gains no one ever anticipates. STIC run huge pilot and main jets. Acceleration is beyond responsive, it is explosive. For MX on my KTM 200SX, I use G2's slowest turn throttle cam, as it returns control to the traditional range/sweep.
Do i realy need a air filter or a stock airbox with additional holes is fine?
When I was 16 I had a brand new Katana R one of the first liquid cooled 50cc ever and I got 70cc kit kunda powerpipe and solid clutch rollers ... I got stoped by the cops doing 98kmph 60mph in a 30 zone the cop went crazy saying 50cc should only do 30mph ... So funny he wanted to seize the bike
Please Tell me you use meeting rod aq-07right?
Question. Have you ever worked on vespas? Interesting bit of kit the ol vespas
not something we work on any more we used to
The new 25mm "Lectron Billetron Micro" would probably suit the sorts of cc-builds you are doing better. Are you planning to test it?
Yessir
I didnt think there was a CZcams about this but I love I have a friend hes has a big bore 94 polini on and 36 carbo also and 2 fast exhuast and polini hi speed vario and a Malossi delta clotch and i dont know what its called in english but its that your vario is one that is stage 6 and he has voca caliber on pretty nice machine
thanks!
I Wait ❤
subscribe for more!
@@Scooterswapshop i have it for a long Time ♡
Try put on Yamaha y15
I learnt the hard way with the throttle cable, throttle got stuck wide open couldn’t kill the bike in time got flipped straight off it 😂
same with me, had my cable stuck while riding 65km/h on my back wheel when suddenly my throttle kept stuck wide open
yeah gotta do it right
Hello guys. You did an awesome job. I have a small noob question... I have a Peugeot Speedfight 2 50cc Air Cooled. I installed 70cc Malossi set, Naraku CDI, Gianeli Reverse exhaust, Malossi Variator and now 19 Malossi Dellorto carb. Problem is when I am at half gas or full gas it chokes. Like it can t go anymore. I have a Malossi sport airfilter aswell instead of stock airbox. Main jet is 80 middle jet 48 small jet 32. What can I do? or How to adjust. Its with manual choke awell.
Main jet way to small, with this setup you need around 110
sorry we dont offer over messages support but we have many videos that can help you resolve the problems on tuning
@@keesanker4241 110?
@@keesanker4241 arround 110? Wow.
@@MrT3rminator Yes a friend of mine with a peugeot vertical engine and roughly the same setup has a main jet of 115 with a 21mm carb. I think its best for you if you try a main jet 100 first
what about lectron carburetor? .. will you make a video about lectron on the Yamaha Aerox?
i have been thinking of buying a lectron or smart carb
no lectron on the aerox no but other bikes.
@@Scooterswapshop are the others with Malossi engine or Original Minarelli horizontal?
Wish I could fit one on my gy6 50cc
On a qmb yeah no that wont work the carb is worth as much as most scooters with that engine.
dude i've had the cable hanging on the carb on my rally so many times, its fucking terrifying hahahaha :D full throttle go brrrrrrrrp
hahha thanks make sure and it the subscribe!
Is there a smart carb for suzuki skydrive 125 ?
we dont have that bike in the usa
can u test it on raider 150 carb?
no we dont have those bikes
Ya got any bugeye Zuma's for sale?
we dont sell bikes
How can i get a nice throtle response on my piaggio nrg power phva 17,5 dellorto, 70jet, giannelli reverse, stock 50cc cyl, multivar 2000 with 5.5g. Its pretty slow response, i have tried changing jets or tuning the carb but doesnt really work, also starts kinda hard (i live in a cold country but still...)
call or message the app and Paul can get you the parts you need
You may want to put some stronger clutch springs, and check for air leaks around your intake, and just turn all your carb settings back to stock. And that will be the best you get out of a stock 50cc. I’d recommend getting a dr70 cilinder. It’s not expensive, easy to do, and makes your scoot 10x better
Get a new set of clutch rollers solid ones, it should fly through the gears then
@@melkelly6148 hi, thanks for your help, but i sold the bike a while ago :DD the rollers were made by malossi so they are pretty good, just needed a stiffer contra, also changed to stage 6 street race 70cc kit, i still keep contact with the curent owner and it really does fly now :DD
its good but i want more upgrade, can you give me some idea my friend🤗🤗🤗
whats your question?
👍👍👍👍
thnaks!
Hi ?? I have a 2008 Piaggio Fly 150 can that carb work on my 🛵
please check our webite
What rpm was that bike on the dyno turning with the sc2 on
all the rpms
@@Scooterswapshop I'm debating getting a 28 sc2 but my engine turns 10.500 rpm I'm not sure if the sc2 work at high rpms
@@Adrenalinspunk 10500 is not high. We’re using them on bikes that spin 17k
@@Scooterswapshop o shit an im worried about 10500😂😂 an is that with a 28 36 or 38
@@Adrenalinspunk I have one bike spinning 16 on a 28 and another spinning 15 on a 38.
Yamaha rd350,Suzuki Walther wolf rg250
?
@@Scooterswapshop that are bikes with similar horsepower.
hello friemd🤗 im jherome from.Philippines, i just want know how to improve the speed of my suzuki 115cc scooter, i change the center spring form 800rpm stock.to 1000rpm, and the roller ball on 10gram from 12grms stock
we dont have those scooters o we dont sell parts we have a website feel free to see anything that may work.
big bore kit. Check amazon.... figure out what motor you have in that bike and go from there.
you gotta show the aprilia sr50 street at 1:19
we have many videos coming
subescribe to see more!
Motori Minarelli 🇮🇹🇮🇹❤️
2 stroke yamaha Aerox?
Yes
21:28 Filipino! (with Jokoy Filipino accent)
Real question is this carburetor too big for an original 50cc motorcycle????
Intro music? Pleasee😅😆
secret
🔴🔴🔴🔴🔥🔥❤️❤️❤️❤️
thanks
omg Negan
?
@@Scooterswapshop your face look like Negan in walking dead
@@TheAurel359 I’ll take it. Better than lookin like a zombie
Wait.., Negan? Is thag you?
Maybe
Send me the bat
fucking 800 dollars for the carb ohhhh
this one about that yep
Your very talkative when you're begin to vlog.... Just minimize your very noisy guy
I will not be suppressed! Lol