FR-S interior transformation!
Vložit
- čas přidán 18. 03. 2020
- Been slowly completing a series of projects to makeover the interior of my Scion FRS (aka Subaru BRZ aka Toyota 86 aka wannabe race car).
Here for FPV flying and not car stuff?? No worries, skip ahead to 11:30 for a good ol' rip sesh
-- Drone Gear --
Skyeliner HD Built and Tuned: rotorriot.com/products/skyeli...
Skyeliner HD Parts Breakdown:
Skyeliner HD frame: rotorriot.com/products/skyeli...
Hypetrain Le Drib 2305 2650kV: rotorriot.com/products/hypetr...
Hobbywing Stack: rotorriot.com/products/xrotor...
DJI Air Unit: rotorriot.com/products/dji-fp...
Transmitter & Goggles:
DJI Digital FPV Goggles: rotorriot.com/products/dji-fp...
DJI FPV Radio: rotorriot.com/products/dji-fp...
DJI Radio Griptape: rotorriot.com/products/dji-tr...
Better Stickends: rotorriot.com/products/m3-lot...
Tools & Other Gear:
Torvol Backpack: amzn.to/3832sy9
TS100 Soldering Iron: amzn.to/2qy34cw
Electric Screwdriver: amzn.to/2jLLjkp
Toolset: rotorriot.com/products/rotor-...
-- Vlogging Gear --
LUMIX G9: amzn.to/2tXwYX9
Wide Angle Lens: amzn.to/2TnF4aN
Daily Lens 12-35 f/2.8: amzn.to/2IbqARN
25mm Prime Lens: amzn.to/2iYIJuO
Rode mic: amzn.to/2iWDXOg
bendy tripod: amzn.to/2iX67ca
-- tunes in this flick --
"4:20' am" by Federico Martelli
/ fede_martelli
"Demo 1" by Robert Soric
/ vhsvibes
"son" by Clueless Kit
/ cluelesskit
"Mystic" by Jef
/ jeff-kaale
"Once Again" by Vorsa
/ vorsa
Most impressive video I have seen you make. Truly committed to that project.
Awesome work 💪
ktmjay agree!
Those transitions during the interior B roll-- 👌🏾👌🏾👌🏾 the dollyzoom was a nice touch. 👏🏾👏🏾👏🏾.
That last 30 seconds of the flight🤯
I know it's mostly car related video but that move at 14:46, huuuuge respect!
Beginner Car enthusiast (me): Get me some nicer tires and maybe a sport torsion bar
Peak Car enthusiasts (Drib): let me resow, relight, and rePROGRAM my cars entire trim appearance.
the reprogramming part. was. downright. insane. half chinese half english. chip in and out passed around like a joint. and finally it works.
Your enthusiasm is contagious..........Those two enter/exit on the garage and the split s where just awesome!
Came across this video very randomly and you've inspired me to take my interior more seriously and work on my videography for my own videos. Love the way you mesh your passion for cars and engineering and do what it takes to venture into new territory!
So so so so clean and so impressed with the mods you take on
Drew! Congratulations on finishing the interior of your car, it came out great! I can’t begin to tell you how much I look forward to seeing Le Drib vlogs! Quarantine is rough! Seen well over 60 of your vids.... You might consider making a shit ton vids super soon! Everyone is in lockdown! I can’t stop ordering parts for multiple quads. Stay safe, and thanks for documenting the way you do.
Ps...I do admire the smoothness of your flying, especially since i can compare it from a few years ago! (Like i said, I’ve been trying to catch up!)
Drew I am LOVING these vlog videos! Keep it up man!
Happy Birthday to me 🎂 I wish more fpv gear to come but Ledrib vlog would be a great gift to my birthday love your flow Thanks for inspiring me 💕
Love the car stuff and the flying too. The "BIG" picture is amazing.
Looks AWESOME Dude. Keep up the hard work!
We appreciate it!
Great job, Drew. It looks NICE!
That interior looks great! Excellent job
Now that was sick car video and some rippage at the end 👍
Wow watching you fly was amazing!! First time watching
So good man. Flying was spot on
you are one of the only people I know that can pull off being a drone nerd and cool at the same time. keep up the great content drew!
hehehehheh
ok huge respect to you man. being a car guy myself, and getting into fpv recently, i think i found as closely relatable person as i ever will.
Absolute insane flying! Awesome man! Love your videos, also nice to see some of your car stuff :)
Dude.. Mad respect on the effort!
The KING of flow! That flight was great. I really enjoyed this video, you should definitely bring more of your hobbies outside of FPV to your channel. Great work with the interior makeover cuz it looks so sick
FANTASTIC FLYING, DREW! (And the car is dope, too.)
Nice interior upgrades + very tidy edit too! Thanks for sharing :)
Killer work man.... that is a passion.
I always enjoy your videos Drew you are a naturally entertaining person as well as an awesome pilot and your editing skills are always improving keep up the good work my friend.
Really nice vlog! Enjoyed the off normal topic. It's nice to see things other then FPV from you!
Drew i love everything about this video. Cars, Vlog, Great Editing and FPV...Just beautiful!
Where did you bought the seat covers?
You’ve got better car content here than many car-related channels🤯
Awesome FPV footage as well!
That was a great video Drew! Blown away with the LED mods you did! Great rip session.. I like to see the crashes as well!
Damn dude you are a master solderererer! Love the mods and great flying as usual!
truly wonderful flying bro🔥🔥🤞🏻
you just earned your self a subscriber for the amount of time and effort put into the car build ...super awesome!!
Bro commitment! This is awesome!
Wow - Super ambitious! - Sweet Flying
Thanks for another amazing freestyle video!
Came out sick 🙌🏼
It looks great! I learned a lot from the cluster swap
love the video! specifically this part at 10:20 so satisfying to watch
Bro...what?? Respect my dude! The amount of work you put in was awesome!
Fellow 10-series here too.
Yep, you're insane! :) In my 51 years of wrenching on cars and motorcycles I've repaired and replaced engines, transmissions, suspensions, brakes, drive trains, ignitions, fuel systems, etc., but never an interior. The result looks great! Nice job!
Jack of all trades. Great video.
Nice work man
LOVING THE CAR CONTENT!!! Please keep doing both:)) I stg I'll drop I like in every episode
Beast mode when you change the gauge cluster chip!!!!!!
INSANE!!!!!!!!!!!! You took the words out of my mouth 👄!!!!!! You are absolutely crazy 😜!!!!!! I would not want to do that to my sweet ass car !!!!!! Absolute perseverance brotha !!!!!!
That's detail right there great work!
Sweet ledrib Mr Drew. Love doing custom interior work car audio it's all a passion and a skill
😆 was fun to watch! Keep em coming big guy!
Man I love how clean it came out !! Noice!!👍👍👍
This has no right to look this CLEAN
U do the BEST edits!! 👍🏽👍🏽
Some sick moves there, you still inspire me. Ow, and the car looks nice ;)
That Immelmann, though. Whoot. Sick lines. Liking the car stuff. That’s kinda my jam, also. 😆 It is always fun flying with you, buddy.
Amazing job... I love how it all started because you saved $100 on a pair of car seat covers.
Pretty cool Drew
Well done on that interior painting
Carpark level transfer, Faaark "said the crow" 🍻
My Toyota is FANTASTIC!
Own a GT86 -12 and loving it!
🤯 ho! Man I’m very impress of all that work good job!!!!
Loved the content! Very inspiring.
Yes, would love to see some car videos. Crazy work replacing that chip. I have a 2018 BRZ and I've been itching to start doing some mods.
Looking great
Now THAT's going all in on a car interior project... an Insane need for detail control, i LOVE it :-)
I could never do it. Such patience
Hey, great job Le Drib!
Such a nice car
Buuuff.. Such a sexy car.. Love that you're mashing up your old channel with this one.. I like to see this..
Wow! Just WOW!
Dude, my Crosstrek has orange stitching everywhere. Seats, door panels, dash, steering wheel. My car is also silver. Definitely a strange color combo. You dedication is something else, Drew.
That smooth always gets me. I aspire, but nothing compares...
Your car is like my drone. Ive been trying to get all the parts since January.
Heheheheh
"I thought, let's paint sum stuff 2"
Awesome.
This is how the 10 Series Shoudl have come! Legit.
Look good. Feel good. Fly good.
Great video. Thank you
10 series gang! But I like the red stitching
Damn GM Engineer know his stuffs 💪💪
I had an FRS 2.0 Release. Modified the, suspension, exhaust and had a tune to remove the torque dip and to use corn fuel. Was set to put an Edelbrock supercharger in it and then had to sell because i needed a truck. I really miss the car.
great video!
Yee lit drew is like my role model
One day, when you get "done" with the car, someone's going to buy that off of you for bluebook or less. Hopefully they know what a good deal they're getting. I sold a 240sx quite a few years ago that my brother had "built". He was meticulous like you, so even with an RB20 swap, everything worked and looked stock. Was my daily driver for an hour commute to work. Never missed a beat. My touches to the car was I de-soldered the eeprom and found a program to change the maps. Tuned it to about 12.5:1, and used a "flip/switch" chip to increase timing 5 degrees when water injection kicked in. Also did a Holset turbo swap. At a light, I could come of the line smoothly and just hold it to the floor and it would start burning rubber once the turbo kicked in all the way to redline.
One day I wish to rip it like you....thank for sharing ....
Thank u for sharing your mods it looks 👌and incrédible b-rolls at the end... That a perfect illustration of your new slogan « persevere » and your flying is Just... sorry i am speechless 😶 love u m’en!
I always do the ascents in my cars also usually with paint but I been doing some hydro dipping and its dope man way better then vinyl or paint
Very nice
Impressive.
Loved the FPV ending, I’ve been wanting to get into this but all my money has been tied up in my 86😂
Wow that's awesome🥰🥰 I'd love to do the Screenretrofit too but... I think I shouldnt try that😂
A lot of work but man does the interior look fire.
Hi drew love your vids
I'm gonna have to do the led swap for sure. That's much better than the orange...
wow lots of work
Oh Drew ! Lol . Watching you cut hog rings with a dremel gave me a good laugh.
Now you are a tuner. Nice. Love that car. Big dream....i drive Supra for a long time....then i get sick.....i lost all😥
Series 10 squad!!!
🔥
That chip swap was sick! My current thought is if this would be possible with a 2022 digital cluster, as crazy as that sounds. I have a 2016 BRZ and would kill to try something like this
Cool car
I own a 13 FRS and wondered about the cluster swap.. I had no idea it would be so hard. You could probably make a fortune selling those retro fit kits
Great changes! Can you provide a little more info on the Gauge cluster swap please? The pages you went to to get the info on the chip flash, graphics, and the parts you got to solder the chip to? Thanks a million!