Development of Surface of Pyramid_Problem 1
Vložit
- čas přidán 25. 11. 2016
- Download the Manas Patnaik app now: cwcll.on-app.in/app/home?orgC... The development of lateral surface of pyramid consists of a number of equal isoceles triangles in contact. The base and the sides of each triangle are respectively equal to the edge of the base and the slant edge of the pyramid.
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf - Věda a technologie
Today is My BE Ist sem exam.And i have studied the entire subject from this channel.I used to think its quite hard to study this subject but you changed my Mind and all of my concepts are clear now by watching the videos here.Thank You sir
Hasheem, I am glad to know that my lectures have benefited you,
And i am sure u gonna do excellent in exams......
All the best man...
God Bless....
Your btech might have been done now😅
@@_thepoeticbubble It is done😀
bhadwe tujhe auto cad hai phir bhi rora, hamein paper pe banana hai madarchod nemesis prime
You got placed?
This who are watching in 2020 carona time 🤞😂
Meehhh😂😂
such a professional way of teaching , really really appreciate your work....not even our IIT professors could teach better than you.
Your videos are so helpful sir and I always recommend this to my friends .never afraid of exams just because of your videos...sir
Hi Arjun....Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference
👍👍👍👍👌👌👌✌️✌️✌️
Ohk . But how are we supposed to draw the part P? What are the measurements?
Really good sir!!Taking time and patiently explaining each and every step.Hats off to you!
Hey Nikhil.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
How do we know where to take 45° angle if the figure isn't given?
Its 2024 and your videos are still amazing thank you so much sir🎉
manas, your videos are the best, you really help thriving engineering students like me with drawing, keep up d good work
Really appreciate your efforts
I have exam today and I used Sir's channel for last two days ,I understood everything just a bit nervous hopefully I will do well
Architecture just got easier thanks to you
No words this was phenomenal❤👌👌👌
sir one question is that why we had drawn the true length separately .....why the front view we draw earlier doesn't represent the true length of the slant edge?????????????????
plz replay.........
This is addressed at 4:52
because if u see the front view the triangle is inclined at some angle .so,obviousely the lengths gonna diminish
Sir please draw for pentagonal pyramid resting on one of its side on HP
This video really helped me out. Can you please tell me what software you used in this video ?
Nice it will help many students like me
Why do we need to draw a curve from centre and radius 31.why is it necessary
How to the same process with an oblique pyramid the apex not at the center
Please solve one for complete surface development of triangular base pyramid too
Sir how are you adding text so quickly in autocad?. I want to know how are you doing it. My exam is in autocad and it takes alot of time in adding text. Please tell me how to do that
Sir your teaching is very nice👌👌👌
Sir, can you please tell me what software you used in this video
Sir i have a doubt . You can draw solution also in the question using square pyramid diagram but how I can draw sol in exam hall
Sir why o'a' in the front view cannot be the true length of slant edge
Sir can you tell me height in which the axis is cut???
In this question , how we know about the altitude of square pyramid.. the question also haven't mention about its length .
Sir this has been really helpful. so can you do it for oblique pyramid too?Cuz in exams they don't asks this cuz its comparitively easier.
Thanks for appreciating man.........
Ya sure i will put that up in my "to do list"
All the best......
And do encourage your classmates to subscribe to this channel so that all can learn Engineering Drawing in the best possible way.......
Thanks sir so much ! Really amazing video 👏👍👍
Superbly explained indeed great help... 👍
Please make the same video on oblique solids
At what height is the plane cutting the pyramid??
thank you sir..its helpful..
Really helping
Many many thanks to you sir
Sir can u explain how can we get slant edge of the true shape
I didn't get u 🤔
Thank u Soo much sir. It's really helpful ..
This is very helpfull for me thanks sir ☺️🙂
Every thing is good but they had no given the height of the pyramid...
How can we draw a pyramid without knowing height...
Since you are doing in PC the image will be there..
But how can we draw it on paper???
0:38 Check the top of the video.
Thank you so much sir u r great😊😊 this is really very helpful 😊
thankyou .. your video was very helpful to me really
You are welcome Heefa...
Thanks for appreciating the content.....
All the best in life........
Do watch all the content thats useful to you and also encourage your friends to subscribe to this channel for top notch learning...
This is very help full for me....Thank You Sir
Hi Gajendra.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Sir axis se kitne height pe angle lena hai? Plz tell sir.
You explain it very simply to understand
Thank you 💓💯💥
You're welcome 😊
sir.. what is the main reason for calculating the slant edge?
I'm completely ready for my sem1 examinations sir...! Thank u so much for all Ur engineering drawing tutorials! All are really excellent! I really appreciate your teaching and we r expecting more tutorial videos from u sir😍 thank u once again!
All the very best
Stay blessed ☺👼
Awesome sir
Thank u
Sir i have a doubt that there didn't mentioned the distance or angle from co planar axis to a¹, b¹&c¹, d¹.. Sir how u drawn it without mentioning the distances.. And why you projected 3¹ to co planar axis.. Plz respond and give me answer
Thank you very much sir
HOW TO DEVELOP SURFACE OF SQUARE PYRAMID WITH AXIS IS OFFSET FROMCENTRE
very good explanation thank u very much
Thanks Vamshi for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Why is true length necessary ?
How do we get 3'1'
Query:-
What is the angle and distance from the axis where the triangle is cut? isn't given.
Sir What's the axis length.....as we have to draw front view frm top view....
Bhai top par diya hua hai 40mm
thanks so much
Thank You Sir
This guy made toughest into simplest,hands off
very helpful
Thank you
Sir i did not understand why O'3' is not the true length
Thank u so much sir for a good video
Hi........
I am sure, this channel is helping you learn.
All the best and do let your friends know about this channel so that they can also benefit....
your literally saving my ass from my caed teacher who hates me thank you manas for making caed a piece of cake
Thank you so much sir,.. I was the most joyful person in the world once I say u explaining this topic
This video really helped me a lot.
(Use of AutoCad for explaining rather than a drawing book is great idea)
Thanks a lottt for creating such content
its almost the end of my fe sem2, this video cleared my concept :)
a huge thumbs up sir.
Thanks Prathmesh for appreciating my work..
All the best and do tell your friends about this channel so that all can benefit...
Genius Sir g
Hello Manas, may i ask you on helping me solving a specific surface development problem?
Send me the problem description
Sir u are not considering the base why
How to develop lower surface of pyramid?
That was really helpful Sir
Sir your video is very helpful for studying....nice work sir...do more videos like this.😊you get more blessings from God for your work...thank you so much.your video is easily understandable..
This is very helpful thanks a lot
+Yasantha Wijebandara
You are welcome....
All the best
And do let your friends know about this channel so that they can also benefit
Very useful
Sir make one video on development of tetrahedron .
ya sure
Sir do some difficult problems
Hello Sir, why we don't take true length in Pentagonal pyramid?
Anyone please help tmrw I m having exam!!
this is awesome it helped me allot.
thank You so much
Vikas.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page.....
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Manas Patnaik thank you.. Sir
The videos are too helpful..
I am thankful to u sir
@@ManasPatnaikofficial Your videos are really good sir,but sir you dont clear the doubts asked in the comment section although you encourage us to ask doubts in the videos.Please try to give some of your precious time in doubt clearance,that would be a greater help sir.Thank you .
thank u sir its really helpful
Thanks chaithanya for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Sir can you upload its dwg file so we can download it too.. it would be very helpful
Sir plz form the front view top view and develop surface of hooper
thank u verry much sir it helps me alot
Hi Rintu.....
Thanks for appreciating the content...
All the best and do let your friends know about this channel so that they can also benefit....
why you are making arc for c and d by making length on the line which does not shows true length but for a and b you are doing it by making the line of true length why??????????
How to pass eg in 1st year simple tips tell fastt
What is the need of marking true length as it is parallel?
George Listen to this description very carefully at 4:50
thank you sir
Hey Shib.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
👍thank u so much sir
Hi Dheepa......First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Sir,I'm one of the fans of yours.Could u please upload INTERSECTION OF SURFACES.
helpful
Thanks a lot
+Rahul kumar
You are welcome Rahul......
Do watch all the content both from drawing and mechanics.....
And do recommend this channel to your friends, classmates and juniors so that they can also benefit......
Thank you for this. I have my paper tofay an di wasn't really vlear onnyhe topic. I'll write and bring back feedback.
All the best
Good work
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: czcams.com/video/WG6H2pISUzQ/video.html
2. Projection of Point: czcams.com/video/fK4h5gM73w8/video.html
3. Projection of Line:
OLD:
czcams.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
czcams.com/video/pzE0D-Ijxd4/video.html
4. Projection of Plane: czcams.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: czcams.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: czcams.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: czcams.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: czcams.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: czcams.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: czcams.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: czcams.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: czcams.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
czcams.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: czcams.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: czcams.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: czcams.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: czcams.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: czcams.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: czcams.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: czcams.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
czcams.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
czcams.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
czcams.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: czcams.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
czcams.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: czcams.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
czcams.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
czcams.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: czcams.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Sir, If you put some presentation of Tray, funnel etc
I will try
I am watching it , even in 2021,
Why r we finding the true slant edge in cube pyramid alone🧐
Engineering student from nepal too
Awesome sir!!
Thanks Utkarsh for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Manas Patnaik sure sir... You saved my Engineering Drawing exam 😂😀
Can you make a surface area of half cut pyramid
sure
very nice
You are welcome ashok...
Do watch all the content on drawing and mechanics.....
And do tell your friends about this channel so that they can also benefit.....
All the best
Ur video are really good..... excellent.....the only problem is that ur accent irks me.....😂
Its nice...but plz make top view part also..it will make easier for us
Hi Apil.....
I am sure that these videos are helping u learn...
Keep watching and do let your friends know about this channel so that they can also benefit................
Manas Patnaik ya sure I will recommend this video..this made me quite easier to understand...plz add the hexagonal pyramid with top view after cutting the plane😊😊