Just A Few Acres Farm shouted you out on one of his Farmall restoration videos. Said he considered you the gold standard. I've spent the last three days bingeing your Super M and D2 restorations. I love yer channel!
@@squatch253 I also enjoy Pete's video as well as yours. I consider your gasket making the gold standard lol. if I have to make a gasket-its the bare minimum of effort. No one will see it anyway right 😛
I get the impression you'll be ploughing in circles, just so you can see the silver on the front wheels. Looks really good, the Norden wheels on before were like having a space saver on your car. Well worth doing.
Wheel swap went well without any drama. New building going up shortly. Maybe, hopefully, 2024 is going to be way better than 2023 for Squatch! Now if X231 will cooperate…………………..
Squatch you make everything look so easy but I just put a new inner tube on a rear tire on my M not only was it 2 6 hour days but I would never post it on CZcams because I don’t need to show the world what a brain dead basket case I am just to give you an example it took me 1 hour to make sure I was putting the tire on the rim the right way so the lugs ran the right way 😂😂 But that tractor is beautiful and so is your 1948 8N Ford you were grading with the other day and they both run and sound so nice Carry on 😀🇨🇦
Kudos to you ole M looks like it just left the factory many years back can't say exactly for I'm not sure of yr mdl of yours just guessing I'd say 48 to 51 yr??:I've a question why weight s on up front tires ?? Plan on pulling something quite heavy out back I reckon??I always felt like it made my steering even more difficult to steer. On account of weight being on the tire "spindle "that's why I installed a "; what I call a flat plate weight rig " and put what desired weight I wanted or may or may not need !! Anywho super great job you do & obviously have done on your ole super M !! YOU SURLY DESERVE THE CREDIT &: THANX FOR SHARING YOUR KNOWLEDGE
After you the new front wheels made the tractor complete . When you put that large pully on the super m it started to list to the right . Awesome video .
Spindle and the hub sure did go together nicely. The wheel weights and the silver rims on all wheels really sets the tractor off not to mention the big pulley!
I have and use the same bearing packer and love it. Packed them the old-fashioned way for many years, very messy. Tech tip: Keep it in a clean one gallon paint can to eliminate contamination when not in use. Nice looking Super M btw.
That looks a lot better, looks like a Farmall. If my memory is correct, I can remember someone saying that the hub swap couldn't be done. 😅 Have a Great Day. 😊
I got a bunch of trays , some used from a school kitchen, some new from a restaurant supply store. Some are aluminum, some plastic or fiberglass on the older ones. I use them for things like working on stuff like the hub change to keep things clean. I usually end up using two, one for parts , one for tools. I started using them while working in the pits on a funny car team and think they are a big help that you may consider. Nice tractor!
Stylin' and profilin' on a tractor. Really looks classic, worth the time and effort. Maybe you could give Mr. Bork a lesson or two on classing up the equipment.
Longtime viewer here. It always bothered me that the Super M's front rims were different from its rears and the rebuild series explained why with it being an aftermarket front axle, and the rationale for one-piece steel rims when it had the loader bucket. Still I was always thinking it would look so, so better if a way could be found to fit a pair of the factory-style wheels on it. So glad that since it won't ever have a loader bucket on it again, you and Sr. went through the hassles of mixing and matching bearing parts and doing a bit of custom fabbing to make this work! It looks so, so much better!
I was taught to and have always put some air in the tube when putting the tire on the rim to avoid pinching the tube with the tire or irons. skitos here are bad too. not a lot of Dragon flies either to eat them.
I don’t know who you’re referring to - remember how I’ve said before that as soon as I took the leap to doing CZcams as a full time job, I ran out of time to actually WATCH any CZcams 😂
@@squatch253 I can believe that. The amount of work that goes into filming, editing, etc. must be truly like a full time job. We thank you for all you do. Yeah, Jaw Tooth is a big train buff who does a lot of videos in the areas of Western Kentucky, Southern Ohio, etc. He has some pretty cool stuff. Thank you again.
Out in the field, there's no comparison to having a much larger front tire. We had a MF 275, the front pivot block(frog)broke we replaced the frog and modified the front spindles, and installed some worn rear 24's from a small Farmall on the front of the 275. Worked fantastic, and looked kinda cool as faux 4x4 haha
The Zeus pulley looks good on there, almost like it was meant to be. Can’t imagine how many problems you would have ran into with the wheel hubs if this was x231.
Well now. You being you,you could always take it one step father and Simonize paste wax the thing. Probably the only paste waxed tractor in Minnesota. Maybe even multistate. Shiny.
Weird seeing a tube without talcum powder. In my area, we'd drown it in t.p. because it lets the tube do as it pleases without chafing inside the tire and it's good for dismissing moisture. And i'm not joking. I usually buy a bottle of the stuff, put one half in one tire, put one half in the other. Very good for when you let the pressure a bit low for softer soils as well. edit: this has to be one of the most beautiful Super Ms i've ever seen. Impeccable taste in all the options and color choice.
Just A Few Acres Farm shouted you out on one of his Farmall restoration videos. Said he considered you the gold standard. I've spent the last three days bingeing your Super M and D2 restorations. I love yer channel!
Thanks! Pete is a great guy 👍
@@squatch253 I also enjoy Pete's video as well as yours. I consider your gasket making the gold standard lol. if I have to make a gasket-its the bare minimum of effort. No one will see it anyway right 😛
yep, Pete sent me your way last year. You work how i wish i did. lol
I get the impression you'll be ploughing in circles, just so you can see the silver on the front wheels. Looks really good, the Norden wheels on before were like having a space saver on your car. Well worth doing.
.16:04 yes I can see it now look at that turning right then left just to look at your new shoes 😅. Now looks like every other super amp 17:00
That pulley would sure give the rock crusher a run for it's money!
Did somebody say rock crusher!??? I am so looking forward to that.
I'm surprised Senior didn't take the M out to break in those new tires first! 🤠
Wheel swap went well without any drama. New building going up shortly. Maybe, hopefully, 2024 is going to be way better than 2023 for Squatch! Now if X231 will cooperate…………………..
🤣🤣🤣🤣🤣🤣🤣
"But weight", nice touch. It does look much better, nice job.
I don’t expect that I am the only viewer who added the clicks from your torque “wrench.”
Breaking the beads with your bare hands, what a beast!
The new silver rims look great against that pretty red paint.👍👍
Squatch you make everything look so easy but I just put a new inner tube on a rear tire on my M not only was it 2 6 hour days but I would never post it on CZcams because I don’t need to show the world what a brain dead basket case I am just to give you an example it took me 1 hour to make sure I was putting the tire on the rim the right way so the lugs ran the right way 😂😂
But that tractor is beautiful and so is your 1948 8N Ford you were grading with the other day and they both run and sound so nice Carry on 😀🇨🇦
That tractor looks so much better !!!
I never could stand solid red wheels on the front of a Letter series Farmall !!!
The Super M looks great! Green grass, red tractor, that's picture perfect!
Wonderful upgrade, just loving the silver accents on the wheels .
ALWAYS love to see an IH video! Great looking Super M, Toby - show or field ready!
That ol' Super M looks sharp now @squatch253!
Kudos to you ole M looks like it just left the factory many years back can't say exactly for I'm not sure of yr mdl of yours just guessing I'd say 48 to 51 yr??:I've a question why weight s on up front tires ?? Plan on pulling something quite heavy out back I reckon??I always felt like it made my steering even more difficult to steer. On account of weight being on the tire "spindle "that's why I installed a "; what I call a flat plate weight rig " and put what desired weight I wanted or may or may not need !! Anywho super great job you do & obviously have done on your ole super M !! YOU SURLY DESERVE THE CREDIT &: THANX FOR SHARING YOUR KNOWLEDGE
What a beautiful tractor! I don't mind the shadow. That's real life.
This has the perfect look and stance for a super M. Well done
4:34 , Oh yeah, baby. It fits.! No grease seal mods to do.
After you the new front wheels made the tractor complete . When you put that large pully on the super m it started to list to the right . Awesome video .
Hey Toby,,,the M is looking great.
🤗 a clean tractor is a happy tractor 👍✌️🤙
Spindle and the hub sure did go together nicely. The wheel weights and the silver rims on all wheels really sets the tractor off not to mention the big pulley!
That M was a superb tractor restoration before the latest updates 🤔 reckon now that tractor is second to none absolutely stunning 👌👌
That tractor is just plain pretty.
WOW! WHAT A LOOKER THAT SUPER M IS! GREAT PROJECT WELL WORTH THE WAIT!
The wheels really do look like they came from the factory that way.
Toby...that looks so much better!
The Super M is a credit to both you and Senior.
I am surprized at how little grease was on the hub you took apart.
I cleaned most of it out in the first episode, when I took that hub off the first time to do all of the bearing checks.
Definitely a nice new old tractor!!!
I have and use the same bearing packer and love it. Packed them the old-fashioned way for many years, very messy. Tech tip: Keep it in a clean one gallon paint can to eliminate contamination when not in use. Nice looking Super M btw.
I just keep this one in a sealed Ziploc bag 👍
Im telling you that was worth the effort,she looks like a Farmall now,and with the big pulley hub and the bath I'll give it⭐⭐⭐⭐⭐
Wheels look fantastic. So does the rest of the Super M. Very nice.
What an intro shot!!! 10/10, very cinematic.
Luke’s eye is going to be twitching 😂
Lots of Crescent wrench action lol 😂
I got a few used wheel weights from the tire shop and pounded them in just to confuse people. Told a couple of guys that I had them balanced. Ellis
That looks a lot better, looks like a Farmall. If my memory is correct, I can remember someone saying that the hub swap couldn't be done. 😅 Have a Great Day. 😊
You made changing wheels interesting.
That’s why your channel is successful.
I like those wheels a lot better. It just seems "right". She's got a real pretty stance in that evening light.
Fantastic video Toby! What a difference those front rims made. The big pulley looking great on it. That super M is a beautiful tractor. Cheers
Man that sue is one good looking tractor. What I really appreciate is that you still get out and work them .
The wheels and pulley look great. It’s amazing how a couple of improvements can make such a big difference. Very enjoyable video Toby. Thanks
Love the universal hammer being used to remove the spindle nut, lol
I got a bunch of trays , some used from a school kitchen, some new from a restaurant supply store. Some are aluminum, some plastic or fiberglass on the older ones. I use them for things like working on stuff like the hub change to keep things clean. I usually end up using two, one for parts , one for tools. I started using them while working in the pits on a funny car team and think they are a big help that you may consider. Nice tractor!
Stylin' and profilin' on a tractor. Really looks classic, worth the time and effort. Maybe you could give Mr. Bork a lesson or two on classing up the equipment.
Thanks for using Luke’s favorite tool to adjust those bearings.
Looks great!
It looks so beautiful , better than new. You did an amazing job
First off….how bad is it that I didn’t know there was a bearing packing tool like that….. second, those rims look so much better.
good looking tractor, good job on the paint,
Great running and looking tractor.
Looks great. It looked great before but the upgrades do set it off well. Thanks for the video 👍
Nothing like taking a beautiful tractor and making it even better!! Love It!!
Awesome upgrades! Tractors you restore are better than new. Sure do love seeing how you and Sr get along and work together!!!
I was taught to tighten bearings, and back the nut off a quarter turn like that.
I still pack bearings like the Neanderthal i am. Thank you.
The old girl looks great Squatch. Some tyre shine maybe? 😊
Love the close up of the IH logo at the start!
Excellent video the Super M looks really nice 👌
It may not be necessary but I like it pack a little extra grease in the space between the bearings just because why not.
Longtime viewer here. It always bothered me that the Super M's front rims were different from its rears and the rebuild series explained why with it being an aftermarket front axle, and the rationale for one-piece steel rims when it had the loader bucket. Still I was always thinking it would look so, so better if a way could be found to fit a pair of the factory-style wheels on it. So glad that since it won't ever have a loader bucket on it again, you and Sr. went through the hassles of mixing and matching bearing parts and doing a bit of custom fabbing to make this work! It looks so, so much better!
😊😊
Officially the going to town rig
I was taught to and have always put some air in the tube when putting the tire on the rim to avoid pinching the tube with the tire or irons.
skitos here are bad too. not a lot of Dragon flies either to eat them.
Need to do a calendar of the fleet! At least a centerfold 😊
Really Is a very cool looking tractor.👍👍
If you’re scrolling through your rolladex of projects, the ole rd6 needs some love!
Such a nice tractor, my dad had a WD-9 back in the 70's.
The front wheels look great! Though I was hoping to see the pulley dropped into gear to see how round it is. Next time.
Man, Toby... that looks so nice. Good work
Dont forget to install the power steering system, it will really make a big difference
Boy that really does make the front of the tractor sharp I guess it's true what they say wheels make the build
Those new hubs make all the difference.
LOL.. 0:30 .
Great work!!! Really pops the tractor. Thank you for sharing.
Looks awesome, good job
The new wheels look great!
I do enjoy the green in the air cleaner jar! I had a Deere 4430 that I really enjoyed. Project turned out great!
But wait...there's more! You must also be an occasional "Jaw Tooth" viewer. I know that you also love trains. Nice job on the tractor!
I don’t know who you’re referring to - remember how I’ve said before that as soon as I took the leap to doing CZcams as a full time job, I ran out of time to actually WATCH any CZcams 😂
@@squatch253 I can believe that. The amount of work that goes into filming, editing, etc. must be truly like a full time job. We thank you for all you do. Yeah, Jaw Tooth is a big train buff who does a lot of videos in the areas of Western Kentucky, Southern Ohio, etc. He has some pretty cool stuff. Thank you again.
Looks stunning them front wheels really do finish the look, the big belt pully look like it's ment to be there.
Beautiful piece of mechanical art!! Great job and been fun watching!
Outstanding upgrade, THANKS!
Out in the field, there's no comparison to having a much larger front tire. We had a MF 275, the front pivot block(frog)broke we replaced the frog and modified the front spindles, and installed some worn rear 24's from a small Farmall on the front of the 275. Worked fantastic, and looked kinda cool as faux 4x4 haha
Definitely looking better with the 2-pc front rims.
Beautiful tractor 👍
That tractor looks great, those mosquitoes sound like Huey's
Looks really good, Squatch
I hope all those mosquitoes at least had the decency to "like and subscribe" even if they didn't become members
😂😂😂😂😂😂😂😂
Super nice. An old timer told me once, "red in the field means green in your pocket."
Looks proper now!
Awsome job. I love that tractor. I have the exact same one. I can’t wait to get mine looking that good.
The Zeus pulley looks good on there, almost like it was meant to be. Can’t imagine how many problems you would have ran into with the wheel hubs if this was x231.
It does look much better with the spoked wheels.
Well now. You being you,you could always take it one step father and Simonize paste wax the thing. Probably the only paste waxed tractor in Minnesota. Maybe even multistate. Shiny.
I would imagine you were the winner of the game Operation a lot!
It looks fantastic, like a Farmall again.
It’s almost too pretty to use! 👍
Absolutely beautiful!
Looks sweet as can be
Thats a good looking tractor man!
Weird seeing a tube without talcum powder. In my area, we'd drown it in t.p. because it lets the tube do as it pleases without chafing inside the tire and it's good for dismissing moisture. And i'm not joking. I usually buy a bottle of the stuff, put one half in one tire, put one half in the other. Very good for when you let the pressure a bit low for softer soils as well.
edit: this has to be one of the most beautiful Super Ms i've ever seen. Impeccable taste in all the options and color choice.
That is without a doubt the prettiest tractor I've ever seen! Nice Work!! AgainI know you wouldn't, but what would cost to buy that off you?
Those wheels do look a lot better but my eye still twitches when I see that wide front end. My choice for an M will always be the narrow front wheels.
What a beautiful supper M . I hope someday to finish my 340 utility industrial.
Man it makes my feel better that the skeeters are just as bad at your place as they are at mine
Well done.