Rover - Rover 75 Electrical Systems - Multiplexing (1999)

Rover - Rover 75 Electrical Systems - Multiplexing
Programme Content.
Location of the fuse boxes
Location of the Relays
Section 1 - Vehicle Architecture
- The Multiplexing Technique
- An introduction to the BUS system
- The CAN system
- Fault Finding in the CAN system using testbook
- The K-BUS system
- The Diagnostic Line
Section 2 - The GM6 Controller
- Location of the GM6 Controller
- The Systems Controlled by the GM6
- The GM6 Highline and Lowline controller
- Rover 75 transit mode
- Testbook and Configuration Options
Section 3 - The Main Wiring Harness
- New Types of Harness Connectors
Section 4 - The Light Switch Module
- The Light Switch Module (LSM) Functions
- Using Testbook to program the LSM
- The Operation of the LSM when the Trailer Module is fitted
- Replacement of the LSM
Section 5 - Parking Aid, Rain Sensor and Rear Sunblind
- Operation of the Parking Aid
- Parking Aid fault Diagnosis and the Operation of the ECU
- An explaination of the Rain Sensor System and Operation.
Programme Running Time - 34 Minutes
Rover Group Ltd. Technical Academy, PO Box 267, Warwick, CV35 0ZA
Tel: [phone] / Fax: [phone]
Produced by Rover Group Training & Development
Rover Group Ltd. 1999
Part of a set of Rover 75 videos produced by Rover for the 75
• Rover 75 Information V...

[@KarlHamilton]

Lol. As if any 900 year old Rover mechanic is gonna understand what any of that meant.

[@oldgitsknowstuff]

900 year old Rover mechanic. I like that.
You can call me Methusila. Lol.

[@tylert6573]

Sometimes I turn my lights off on 75
And they don’t go off?
Have to turn them on/off again
👍🏼😂

[@roverpowerHI]

If you switch off the lights after turning off the ignition they will be on for some time. (follow me home system) Try to wait 30 secs to see if they go off.
cheers

[@megosipos1241]

🌶