Testing the NEW Ortur Laser Master 3 10 watt laser engraver
Vložit
- čas přidán 9. 06. 2024
- The new Ortur Laser Master 3 is finally here! Lets see what it can do! We'll try cutting and engraving various materials, and run some tests with Lightburn.
Did you make something after watching this video? If so, I'd love to see it! Please tag me on Instagram @full_steam_designs and Facebook @Full Steam Designs
The following link is an affiliate link. I get a small kickback for each sale made through these sites.
There’s 2 places you can purchase through:
Ortur.net -
More info on the Ortur Laser Master 3 - s.zbanx.com/r/teT8Gg91OlDb
Or MadeTheBest -
LM3ZB100 (with $100 off)
Supreme combo set: SAVE $130 Get OLM3+ DEWALLIE Rotary Roller+ DEWALLIE Air Pump at $789.97
s.zbanx.com/r/2qS9EosSYWZ0
Free SVG files - fullsteamdesigns.com/maker-re...
___________________________
Tee shirts:
teespring.com/full-steam-desi...
teespring.com/full-steam-desi...
/ fullsteamdesigns
/ full_steam_designs
fullsteamdesigns.com/
If you enjoy my content and would like to show your support on a more personal level, please consider checking me out on Patreon. Thank you!
/ fullsteamdesigns
Or you can buy me a coffee: www.buymeacoffee.com/ChrisPow...
Another great way to help support the channel is through my Amazon store. I get a small kick back from anything purchased. It’s full of products that I use and recommend. www.amazon.com/shop/chrispowe...
The following links are affiliate links. I get a small kick back from each sale, but you still pay the same great price!
cork for coasters - amzn.to/2UaMnEn
Ortur Laser Master 3 - s.zbanx.com/r/teT8Gg91OlDb
Get Lightburn here: amzn.to/3ipfcss - Jak na to + styl
I enjoyed the review and I appreciate the head-to-head comparison with the 10w Xtool D1.
I had already liked and subscribed when you mentioned you were in the Navy, so I also want to thank you for your service.
Looking forward to your future videos.
Thanks I really appreciate it
Solid and thorough video review. Really appreciate your perspective! Thinking I am going to take the plunge with this machine.
You’ll love it. Good luck and have fun!
Nice video. I just finished putting mine together. Thanks, I appreciate your efforts.
Thank you
Nice review! Mine is on the way. Should be here soon. I’ll have to check out more of your videos and steal some ideas 😉
Great review! And thanks for the tips.
Thank you
Super helpful video - thank you!
Thanks!
Great video man!
Thank you!
Looks like a solid laser
Definitely
I like your review style. You've earned a like and a subscribe.
Thank you 🙏
Pretty cool man. 👌
Very cool
daaaaaaang.... wibbly wobbly content ! :) instant like
Hey @Criss great video. I just wonder if it would engrave glass? for like a logo on a beer glassware?
Very informative video !! Thank you brotha ..🙏🙏 thanks for your service !!! I myself server in the MARINES CORP
Thank you 🙏
Do you have a video installing and using the air assist on the LM3?
Please do full review of the comparison between xtool d1 10w and Ortur master 3. I'm struggling to decide between these two machines as right now their are at the same price.
Can I cut 4mm birch wood? Thanks for the great video 👍🏻
Overall, so what's your choice on the lasers you have reviewed. I'm on the fence on Ortur laser master 3 and the Xtool.
Thanks for all your videos. I too was in the Navy 1976-1980
Curious of your recommendation between this and the xtool. I have a shapeoko 4 xxl and have learned so much from your videos. I would primarily be using it to engrave cutting boards and similar products as well as cutting 1/4 mdf letters and designs that are too small to do on the CNC.
I’d be leaning towards the Ortur. It’s a much faster machine.
Thanks Chris!
Thanks for watching Jim! You looking to get a laser now?
@@ChrisPowellFSD Well I have the 2 Pro, I have the 10 watt head coming Wednesday. I want to start making kids toys and I can't keep the co2 laser in the garage, it would freeze.
@@JimBeshears that will be a nice upgrade for it.
Loved the review, thanks. I noticed when you were cutting you had a piece of aluminum under the piece being cut. Do we/should we actually be looking at one of the honeycomb bases when getting into more production? Thanks
Thank you. Yea I just use one of the pans that goes in the bottom of your oven. It catches anything that drops and prevents you from burning into anything below it.
would you happen to know if I can just buy the module and connect it to my ortur 2?
Great video !! Isn't that stepper motor in the way ? I'm thinking if I have something that's not completely flat across the burn area it might catch 🤔
Thanks. I thought that at first too, but now that I’ve used it I can’t think of any reason why I would have something high enough to hit there. They will have legs that raise it for thicker objects, or you can just use cans if finish like me haha. You would just raise the machine up and lower the laser to focus it.
I have a question maybe you can answer I have the ORTUR laser master 2 & ORTUR laser master 3 I recently just ordered the 20 W laser head kit for my. ORTUR laser master 3 but I want to move the laserhead from the ORTUR laser master 3 over to my ORTUR laser master 2 I just need to know do I need any extra pieces? Can I just move the power supply over and switch it out or do I need a driver board? Please let me know. Thank you.
Will this fit in the enclosure you built for your Orturo Laser Master 2 Pro? How do I get a set of the plans you did?
CAN I CUT FABRICS LIKE DENIM TSHIRT ETC?
Sounds nice. The xtool is super expensive. And only thing i want before i buy it is an extension to 80cm atleast.
Looks like that have an extension that will double the length
I really wish they made these bigger. I want to be able to engrave a design in a 24x36 canvas.
Best you’re going to get is to extend it to double the length with their kit.
Do you know if the original YRR 1, can be used on this new laser? Thanks for a great demo of the lasers quality in build of the laser and its results in cutting and engraving.
I think that’s the one I was using.
hey man, when is the next video coming out with the Ortur Laser Master 3 vs Xtool D1 ? im in the market and really want to buy one of these. i think i could have a lot of fun with one. whats your personal opinion on what one to get?
Great review 👏 im looking for a laser engraver and you convinced me with this one 👌 does it need to be connected to a computer or a phone until it finishes or can i send the job to it and it will stop when finished?
thanks
You can connect wirelessly or use a micro sd card. I haven’t actually tried these methods though. I always just have it connected to my laptop.
I would like to see more settings on doing the cups I have multiple rollers I have the Adam stack and also have the one that came with the X-TOOL D1 which I really like because it allows me to do coffee mugs because I haven't slept around the other direction but I can't seem to get to settings right everything is always stretched out. Sorry about my crappy spelling.
I do need to do a video specifically on the rotary stuff. Sounds like the diameter setting or steps per revolution might be off.
Great video, thank you. I purchased the ortur laser master 3 and the extension. Just put it together without any problems. I did purchase a 400mmX600mm and a 400mmX850mm honeycomb bed. I noticed you didn't use a honeycomb bed. What are the advantages and disadvantages of using one? My hobby is building balsa RC airplanes and this laser cutter will be a great tool for cutting out parts.
Awesome. I wouldn’t mind having the extension on mine. The honeycomb just makes it easier for cutting through stuff. There’s nothing behind it to have to cut into.
Can ANY of these budget lasers cut 0.5 aluminium?
I'm wishing to cut 0.5 mm holes along the edge of an A4 sheet of (white painted) aluminium, to form the cover of a journal.
That was a very informative video. Thanks for that, because I have been wondering whether I should get one, and now it seems like I will. I had one big question, namely does it come with something to place underneath it to protect your desk/table from the laser, or does that need to be a separate purchase?
You would only need something under it if you plan on cutting through. You can use a baking tray and one of the wire trays from an oven.
@@ChrisPowellFSD Thanks, Chris.
Did you have firmware issues? I just spent over an hour with Gil trying to get mine sorted out. It looks like it works well according to your video. Nice work!
I did at first. He helped me with some stuff too.
yo compre ese cabezal y la verdad es impresionante un dibujo de 8 horas ahora me sale en 43 minutos y asta tube que nerfiar la maquina para que no salga tan intenso 😍🥰
Does it work on granites?
Wish they'd make these a bit bigger. Really want to cut full 20" x 30" pieces of foam board. Speaking of which, does this cut white foam board, or struggle like some other diode laser models? I don't want to spend thousands to do something so simple.
I can’t say. Haven’t tried foam. Not sure what chemicals might be produced. They do have a bed extension coming out that will double the length of it.
What were your settings for the slate coaster?
400ipm @ 100% power
Do you think this machine will edge and cut PCB boards ?? Would be keen to know . Thank you
Not sure
Trying to compare the 10 watt X tool with the 10 watt Ortur any advice
The 10 watt Ortur is faster. They’re both fine machines, but the Ortur will have a serious speed advantage.
I could not get it to connect to my machine through the app on my iPad or my iPhone. I asked me to open some port.
Did you follow the steps to connect in their video on their website?
I have a Glowforge so I only want something to engrave powder coated mugs. Would you recommend this for a beginner?
Yea, it would be great for that.
Have you done a comparison between the Ortur Master 3 and the XTool D1? Looking at both, but the XTool is about twice the price.
I haven’t done a video on it, but I have compared them. The LM3 is similar build quality. I like that it has built in limit switches. That’s something the D1 is missing. It’s also quite a bit faster than the D1. And their app works very well if you want to use it that way.
@@ChrisPowellFSD Thank. I was pretty much sold on the Ortur, you filled in on a few items I did not know about. Thanks.
Can this still be used if I put it on something larger than the case but the area I want to work on with still with in the cutting size?
Yes you can just set it on top of what you want to engrave.
Some day I need to get one for engraving metal. What watt would I need for that?
You’re going to need a fiber laser for that. That’s on my want list too. These diode lasers can discolor stainless, or remove coatings like anodizing, but can’t engrave metal.
My TF card lost. I insert in in the top of the tf card insertion. How can i retrieve it? Can i put a new memory card?
I have no idea. Reach out to the manufacturer.
This diode, can be used for cutting fabric like a CO2 laser?
It should be able to do natural stuff like cotton. Not sure about synthetics or blends.
On your recommendation, I’m looking at purchasing this laser. However, I haven’t been able to find any reliable information on cutting mdf. In your experience, how fast will it cut 1/4” mdf?
I haven’t tried mdf. Not sure how well it would work with whatever they bind the fibers together with.
Hi please help,
Is it possible to cut 396 mm diameter disc with the laser.
The cutting area is 400x400mm
Hi, looks amazing. Would I be able to engrave anything onto marble ?, or is that to hard for the laser.
No I think you’d need something more powerful or a cnc router with a diamond drag bit
@@ChrisPowellFSD Thank you, I thought not, but I have a huge pile of marble slabs just waiting to do something with. An Inch thick, 2 feet by 3 feet in size, in all colours and patterns. Seems a shame to leave them outside doing nothing. Must have nearly 100 units.
@@Baron-Bagaten o wow. Buy a small cnc router and use a diamond drag bit. You could probably get away with a lower end machine because it isn’t actually cutting through the material, just dragging along the surface.
@@ChrisPowellFSD I do have one of those larger Ryobi Router's, would that be OK do you think ?. Also, have you any idea on how long a diamond drag bit would last for ?. Thank you for your advice.
@@Baron-Bagaten the bits don’t actually need to spin. I’m not sure how long they last. I have one but haven’t used it enough to wear it out
did you purchase the air pump and is it necessary? Also, do you know what the pros and cons are on this machine VS the jtech 14w cnc addon?
I didn’t purchase the air pump. The pros of this are that it doesn’t tie up your cnc router. Also, I don’t recall seeing a 10 watt jtech.
@@ChrisPowellFSD thank you, jtech has 14w not a 10w, I just ordered the ortur laser master 3, great informative video.
@@isiteweb awesome you’ll love it. I believe the 14 watts is in reference to the input power, not output.
I just put mine together. I can't get Lightburn to recognize the new laser. Did you download anything else to get it running? Or set it up just like the LM2?
I just set up a profile for it manually.
@@ChrisPowellFSD Thank you. I forgot I could do that. Great review!
How do you get it to hook up on I pad
I don’t have one but I would imagine you would use the same app as on the phone
Just getting into the engraving game. What laptop do you recommend
I use a MacBook Pro. Shouldn’t really need anything too fancy though.
Thank you
is this more power than the lm2 with the 20w laser?
It’s 20 watts of input power. 5 watts output. This is 10 watts output. It’s twice as powerful as the lm2
hi. in minute 7:35, wich material is the coaster? thanks.
Slate
@@ChrisPowellFSD thanks Chris!
Does anyone know the lifespan of this laser?
Have you contacted Ortur?
What's the app called?
Laser explorer
Wi-Fi or memory card capable?
Yea. I thought I covered that.
Can I just buy one of your laser engraver?
Hah I don’t have any for sale
Ortur Laser Master 3 10 watt or Longer Ray 5 10W? Want to buy first laser and start small business.
Ortur, hands down
Most users in the forums, on Facebook and even Ortur themselves, give speeds in millimeters, not inches. There's no right or wrong, but millimeters seems to be way more common when posting or asking people about their settings. Just sayin'.
I guess they’ll have to figure out how to convert them then 🤷♂️
@@ChrisPowellFSD We know how, it's just annoying. Thanks ✌
Everything you're doing is begging you to use a large, powerful and quick C02, i outgrew my toy diode lasers in less than a month.
Obviously a larger, more powerful machine would be better, for nearly everyone. Size is the problem.
ma tagliati quest barba che ti invecchia
Can I use eyeglass wipes to clean my ORTUR Por 2 / ORTUR 3 laser on my laser engraver?
ZEISS LENS WIPE.
PACK A PACKAGE.
ens Wipe
Gentle and thorough cleaning of high-quality lenses.
Quick and easy to use: Lightly brush away dust and dirt with the folded wipe. Unfold and gently clean the surface using circular movements until it's clean and dry.
Advisory: On glossy surfaces, test a small area first. Single use only. A dirty or dry wipe can scratch. Not for use on contact lenses.
I would think it would be fine, but it would probably be best to contact the company
'm currently running three lasers New Ortur Laser Pro 2 New Ortur Laser Master 3 and I have one other one that I built for somebody else that comes over once in a while for me to teach them how to use it I've have not mess with updating that one because it has not needed it yet. X -TOOL D1 I've kept this machine on the same software that comes with it I have not updated to Lightburn because the person that I am showing how to use it is not very technically inclined.
Using a MacBook Pro so I'm using the Mac mini basically the same thing. I would like to see what you did on the update on. The following steps below tell me if you've done this yet.
Like to see what steps you did. '' In technology we trust to protect and serve''
Joel R G Gizmo
Joel R G Gizmo
0 seconds ago
Please explain the update procedure on opening the ben file from a Mac I don't use windows only else I absolutely have no choice.
Ortur I sent me a Ben file and I'm not sure if I can open it from my Mac. But if I do so on the windows machine and I have to do the procedure that they're talking about I use lightburn I do not use laser gerbil.
This is the sellers instructions that I was received but I don't have a windows computer on the system I'm running out now I'm using my Mac mini. A PC would take too much space in the area that I'm working with.
Let me assume you are on RC1, but you can confirm this by typing $i in your console in lightburn
If on RC1 the steps are as follows, download the zip file i sent, extract to a folder in desktop
Once done, turn the machine off
Then PRESS and hold the small reset button on the back and count to 3 -> Press and hold power for 3 more seconds, then release reset
ORTURLASER should pop up on the devices as a drive. Copy ONLy the bin file into it (ESP_OLM3_205_RC21_20220730.bin)
Machine will think for a min and auto power off
Once done, turn key to the RIGHT (right is on)
then power on machine again
Connect to lightburn and $RST=* in console to reset all defaults if I do this part here I'm assuming that I have to do it from the same computer that I'm using the machine with.
Let me know if this works please
I just dragged it into the folder, just like they show on the windows update.
What would you do if you are having grounding issues? It may just be the USB cord that was sent with new laser. I'm still waiting for new one to come in the mail
@@jasonkennamore6001 I got a bunch of these ferrite clips and put them on my more complex electrical components in the shop. They helped a lot on my cnc router with grounding issues. I also put them on my laser. amzn.to/3R5XaHH