FORGOTTEN 1986 Ford F250 is BACK & FIXED!
Vložit
- čas přidán 20. 02. 2024
- GRAB YOUR NINEONINE MERCH HERE!
SHOP NOW: www.nineoninespeedcompany.com
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU... - Auta a dopravní prostředky
Put a quart of good ATF in substitution for a quart of oil next few changes and it will clean it right up and won’t hurt a thing. Bought a 91 same color as that one for my daughter couple years ago and same issue, I also changed the drain plug, pan gasket, and valve covers. It set in a garage for years. Runs great now oil came out super dirty first couple of changes with ATF and now it’s nice and clean and engine is super quiet. No leaks
Megan is something else. She jumps right in. Your other girlfriend would disappear when it got nasty. Truly love that truck.
YES BROTHER keeping sbf's alive in a LS world thank you
gotta say megan is awesome sir I love to see women getting in there and working on cars and trucks too. it takes a really special kinda girl to do that! If you find one they are a keeper!
That thing deserves your old Fox body 302. I was 11 years old when your truck was built. June 6th will be 30 years since I graduated high school. Damn, you're young! LMFAO 🤣🤣
I have a1992 F150 and the water temperature gauge never gets far into the warm temperature range. Even with a full load of gravel in the truck bed. It has a fairly new water pump, a 192 degree thermostat and a 3 core radiator. And yes a fairly new water temperature sensor for the ECM.
Well, I’m glad he told you about the ATF because I was gonna tell you the exact same thing run some ATF through it. It’ll clean it right up, dump the ATF out but your oil back in, might run some Berrymans in there as well.
When my 86 Bronco 302 EFI finally had enough and we yanked it after 10 hard years of faithful service, internals were quite clean, just worn the F out! 20 over on the block & JE pistons, stock crank 10/10, shot peened rods, found a nice set pre-smog 351 heads with feraria 2.02/1.60 valves, full roller conversion, truck focused porting, don’t recall cam specs but came from Lunati, freshened AOD…damn if that wasn’t the best truck combo ever- sure miss the ole girl, Midwest rust just killed it
Love this truck and it’s so awesome that Megan is there and takes interest in your vehicles and she’s Definitely a Keeper Craig 😉🥰and Remember if you remember Ford has a Better Idea 💡 and so do you for bringing Megan onto your Channel and into your Life,She’s got such a Beautiful Smile 😉🥰Keep up the Great Job 💪🏼
Easiest way to clean the engine, transmission, cross member under oil pan. Is the oven cleaners from Sam's club. After that spray sits for about 10- 15 minutes. Car wash it off and it cleans like butter. Just don't get it on body paint. It cleaned all that oily crude off the frame and cross member.😊
You mean BaconMegnncheez is doing everything and you're watching Craig
You need to relocate the PCV port from the rear of the manifold to the center of the manifold. There's a TSB out there calling for it. If you don't, it dumps all of the blowby into cylinder #8, leading to all kinds of problems on that cylinder. Basically, you drill and tap NPT for a hose barb-NPT elblow in the center of the manifold and plumb to there.
Woman that gets her hands dirty is awesome
Great job both you and Megan. She ain’t scared!👍🏼
The revival of this bullnose is really the only reason I am subscribed the channel. Its the only video that really catches me
Cant get over how good this truck looks
1998. "That was before I was even born!" Big middle finger, Craig. LOL I was already married for 5 years in '98.
Love the channel, young man!
I loved your tip on how to paint the intake, just have someone else do it. LOL.
I love everything about this truck!
Was missing this truck!! Glad to see it running better
I love this truck! Such a classic
I feel that man busted my knuckles cussing my truck trying to get a rusted lug nut stuck to the wheel
Music is so much better in this video!!
Bruh, Baconmeggncheez needs a raise! She puttin in work fr!!!
It's always a good day when there's a Craig video.
Yes indeed Awesome, but need more Crew cab content lol
Cant wait for more on this one
Hey Craig! Love your videos man! It gives me motivation for my projects. I’m a FoMoCo guy at heart like it seems you are. Something I’ve found in my OBS fords is the gauges lie a majority of the time. My 88 f350 460 reads just below the n on the temp gauge but runs at 193 ish depending on the Texas weather. Just some food for thought
That spot on the heater core that your uncle sprayed with foam is where the mice get in. There's also supposed to be a large rubber grommet that blocks off access to the heater box through the cowl near the antenna. I glued mine down with RTV to make sure nothing could get in there.
Heater cores are like a hot water tank for your house , when they start to fail It will let go right away or it won’t . Damn things lol
Craig needs his own shop with the proper space with in and out entry.
Aye first maybe and congrats on the progress man thanks for giving us all the confidence to work on our own projects
For cleaning the tank, I had to pressure wash my 81 celica tank. The chemicals and stuff only do so much when there’s just a crapload of material in there that needs to come out. Not sure if yours is similar but the filter makes it seem that way.
Craig talking the whole video then Cbum does the outro😂😂😂
U have some cool projects
Craig my 82 bullnose keeps blowing the single barrel carb on the i6 300, please help 😂
Love your videos craig
I just fixed the bucking on hard throttle on my F150. Ended up that the fuel pressure regulator was bad. I bought a Kirban regulator and it solved it.
great stuff guys thanks
F250 video is great and Megan in the overall 's is not bad either😁👍
Good to see the Bullnose getting some love.
You should see if the air box and coolant/windshield washer fluid tank from a 1992 F150 would work on that truck.
love the vids
It would be awesome to see the fox body motor in the bullnose
Beautiful truck!
if you are going to engine swap this vehicle my suggestion would be to put a diesel engine into it and retain the dual tank setup as you may know diesel engines have a minimum of double the torque to horsepower. also if you do upgrade it slightly more than stock.
Love the truck, really like the rims and tires on it.
I wonder if a vapor blaster would be within the budget of your shop to have. That'll clean up all your aluminum and iron castings and a jiffy!!
Figured I would order a shirt so you can buy the rest of those pants 👖 😜
Cool truck
Don't delete the coolant line to the throttle body. It'll freeze up.
Were is the 64??????
Nice truck
Cheese egg and bacon seems nice
Don’t put carpet back in it, stead do vinyl it’ll look way better.
Paint that center panel!
Being an EFI engine the valve cover gaskets should never cork but rubber.
Back in the day I always had my hoses loose at the throttle body to pull off quickly for a race . The butt dyno said it worked .
Heeeel yeaaa Craig 🔥🔥🔥
Dad had a 1981 XLT with...Red Velvet
Do you have any sort of leveling kit on it and what size are the tires? Love the bullnose!!
I was one year old when they was installed in your truck
Megan rocks!:🤘
Maybe carbon DEPOSITS?
Marvel mystery oil seems to work quite well, IMO.
I wish I was that radiator support 😅sheeshhh
What kind of wheels are on that pickup? I’ve been looking for them for mine but I don’t know the brand/model
Replace that fuel tank
Just suggesting tieing hair back so you dont get caught on anything and track grease in your hair.
Tanks are cheap, I think I paid about $100 from Rock Auto.. ruin a fuel pump on a dirty tank and you'll wish you just put in a new tank
What are those rims?
Hi 👋
Need to redo the red 2nd color, instead of leaving it patina.
Run some seafoam it'll clean it up
What rims are they?
When you going to finish ur dirt bike. Hopefully before ur too old and fragile to ride it . I like to see 8t ripping
Bro, you better marry her. She's a keeper
It would be sick with the Foxbody old motor you pulled out.
👍
First comment let’s go! Love your videos!!
😎
Needs 460
Needs a LS motor and Transmission if you want a reliable shop truck, be just a nicer ride all around as well. The best mod for a Ford is always a Chevrolet drive train as a lot of vehicles look quite nice but never work well.
Colab with @autotopiala pleaseeeeeee