Building an Internal Cycloidal Robotic Actuator
Vložit
- čas přidán 13. 02. 2024
- Get your projects made with PCBWay today by going to: www.pcbway.com/
Project Overview: www.aaedmusa.com/projects/int...
CAD and BOM: github.com/aaedmusa/Internal-...
BLDC Winding Configuration: www.bavaria-direct.co.za/sche... - Věda a technologie
A Robotic Actuator of This Quality *and it’s Open Source*?!? Absolute *LEGEND*.
Sorry to say your bolding didn’t work
@@Bisaw37 damn youtube comment formatting, between that and mobile always getting messed up and blocking me from seeing longer things (enter key kind of deal) i am just A n n o y e d lol
@@ericlotze7724Gotta have a space after the * to work sadly. Not like Discord.
@@ericlotze7724 Tip: Don't put any characters right before or after the word you want in bold, for example:
*LEGEND*. Will not get bolded because there's a dot right next to the asterisk
*LEGEND* . On the other hand, does get bolded because I placed a space between the last asterisk and the dot.
This is also the case for the first asterisk, just backwards:
.*LEGEND* doesn't get bolded because there's a dot right before the first asterisk
. *LEGEND* does get bolded because there's a space between the dot and asterisk.
Hope this helps! It also applies to _italics_ with “_”
@@F4ll-Nyou are a *LEGEND*
Love a guy who hits a wall or the same wall and never stops moving towards their goal. Can't wait for more.
You've clearly never owned a Castle. Then you'd change your tune
@@jerbear7952 Proceeds to fall into the Grand Canyon and walk into the cliff face repeatedly.
Alexis De Tocqueville in "Democracy in America" (democracy is meant, generally democratic, not the party) But he describes American farmers 1830, as tinkerers..inventors , an amazing part of American history. My earlier years was spent in a Cummins dealership. There were two guys who grew up in the country...they were the best mechanics
Lovers hit walls... winner hit home runs. Check out my homerun... I am best engineer for China.
A+ for the sense of humor... A++ for adding fails... A+++ for perseverance! Keep up the good work!
To wind a motor coil use a long dull tip syringe tip mounted to a pen shaft. It allows you to "place" the wire between the slots where your fingers don't fit. Try bending it to different shapes if you need. Long sowing needles eyelet bent to a hook could also be used. Ideally, you want to fasten the stator to a fixture so you can use a second hook tool to pull loops into position with one hand while guiding/"paying out" the wire with the syringe tip or needle in the other.
@excitedbox5705 ✅
Genius.! +10,000 likes.
Now, who are, and where is the hunan you replaced.?
When you pulled apart the copper for a second time I just wanted to give you a hug lol. I’ve had to start over on my unreal engine plugin multiple times and the excitement/frustration is very real. At least in my case, it’s literally just code and not physical labor haha. This is such a cool project, thank you for sharing it!
Coming from a tinkerer in life and unreal engine, there is no difference bro, just hair pulling.
Hitting it with a hammer and ".9 inches is more than enough" had me rolling.
17:42 preach brother ! PREACH
13:15 This is the math equivalent of the “Movie Hacking” lol
That’s what I do in exams so the teachers don’t suspect I’m cheating
Great video!
A small side note, one thing to keep in mind when using cheap rare earth magnets: Buy in bulk, more than you need!
Their Tesla field strength is all over the place, if you want to build high efficiency motors you need to measure and sort those to find similar Tesla strength.
If you don't do that you can introduce nasty harmonics confusing your motor driver.
Could you maybe suggest good magnets? Like these that are used in video? Where one can by them? There are a lot of magnets by amazon, I already bought several in the past, but they were not strong enough. Gerne aus einem deutschen (Online)-Shop.
@@BentFunction Best place are specialty shops that only sell magnets.
They are still a bit inconsistent at times but way better than the cheap garbage.
Theres a bunch of them, but you need to google them because YT just silently deletes comments with links nowadays without any warning.
Except for those on googles payrolls, those are fine for some reason 🤔
If you have any eshop recommendations that would be nice!
@@sotirisbekiaris4055 I did, but YT keeps deleting those comments.
Apparently I'm a scammer for including helpful links to sites that don't pay the G for ads.
Way to go to destroy a platform.
Lets see how long this stays up.
And they wonder why people are so pissed.
@@DerSolinski hm thats sad. I don't know if you posted again a link. I can't find the comment... Try adding it with spaces so it is not recognised. We are going to figure it out
That’s so cool! When I was in school for mechanical engineering, there was a single mechatronics elective available only every 2 years- and it filled up in less than 10 seconds after registration opened.. needless to say I didn’t get in. I’m now hopeful that I can learn a lot about robot design on my own time from open source projects like the ones on your project! Thanks for making this available for people like me to tinker with and learn- it’s really awesome
I've watched thousands of build videos and I've never felt this intimidated.
Dude you are an absolute legend. Thank you so much for posting your fails. Showing my students that failure is part of the process is so hard to get when people hide there mistakes because internet narcissism or plain old human shame. I loved seeing your try fail cycle and you triumph by keeping the effort moving forward.
It feels like I've seen a lot of videos of these 3D printed gearboxes lately but this is the first one with this production value I've seen well done
I love these exploratory videos so much. Well done, sir!
Nice job. Thanks for showing the attempts that didn't work. Watching you trials made me appreciate the simplicity of the harmonic drive.
Awesome, I loved watching all those tests, especially how precise it was even with the weights on it!
Another awesome project. The world is lucky to have you!
Absolutely amazing! I’m sorry about the A1 recall though, Bambu really does make great printers
such amazing production quality, simple and easy to understand yet somehow explains more in such a short time than anywhere else on the internet. awesome idea as well and just amazing video overall. not even 4 minutes in and you definitely deserve a sub!
This was great. I really like your format. Super rich in details, not much fluffs. Looking forward to more.
By far the best cycloidal and robots projects in general on yt right now. Very well thought out
Criminally underrated channel
That's an awesome design. Very cool seeing the process of design, assembly, and testing.
Amazing! You're my hero! Great ingenuity and craftsmanship! I'm looking forward to see your next video!
Your actuator had me impressed.
I like the performance. :)
Awesome work! It looks like you put a lot of impressive effort into this design.
Incredible problem solving and persistence! Great you was the project through to the end - the results speak for themselves 🚀
Crazy impressive and great presentation. Looking forward to how this evolves.
Great video. Thanks for sharing the failures as well as the successes.
I learn so much from each of your videos... not the least is that an impressive final result is often built on top of many retries!
Your production quality is increasing, also awesome motor design, well done!
very impressive - probably the best DIY actuator motor I've seen yet! Top Kudos to You!!!!
Fun and very clear! Thank you! Looking forward to seeing prior work and future projects. BtwGreat presentation skill, clear large graphics. Good/great pacing , sound and wonderful comedic timing! Whoo hoo!
You never fail to amaze me with these high quality videos!! Keep it up Aaed!!
Appreciate it bro!
I'm glad to see that this is do-able!! I attempted a similar build with a planetary gear system and got stuck at making the rotor on my cnc machine. Also, making durable gears from scratch was a challenge
Beautiful design and execution!
Tested under load with no cooling and no lube. Yes, fully out of metal would be awesome!
Your videos are really amazing in every way, you’re clearly one of the best CZcamsr out there
Amazing work, cant wait to see what you do next!!
This video led me to binge all of your other content and hit the subscribe button, great work!
I thought I was the only person who used a calculator like that! Super impressive video, thanks for sharing.
10/10. Great design. Great video. Looking forward to more from you!
Epic build, I've been wanting to build/design one of these for a hex/dodeca bot I've been concepting, this'll serve as a good reference point for a similar type of design as QDD is necessary for the desired torque values. Awesome insights!
You’re a gift to the community.
Thank you.
Beautiful work on the actuator and the video!
Internal Wobbler dive - pretty good name!
TY for showing the iterative process, and also the mistakes you made! Amazing work! It is also pretty cool that we live in an era where we can go from printed prototype to machined part as an Individual without a big company.
Pro tip: if you have friction fit metal parts, temperature differences are your best option. Put one in the freezer and one in the oven and chances are, they will fit together. ;)
The tossing of parts and the mad tappytapping 'calculations' add just the right kind of humour. Nicely done.
Excellent presentation; excellent editing, and a great project. Thanks!
I found your project inspiring, Thank You!
Thank you. This is a Wonderful contribution to OSH communities trying to reduce their supply-chains! I'll spread the word.
Bro.. you are built different. Great job on your consistency and creativity.
quite impressive improvment here, i'll waiting for more cool designs
This is... incredible work. And incredibly inspiring.
Thank you for sharing your amazing work!!
Same page with you on the A1, my last one was so bad so it's such an upgrade.
Love how you also share what didn't work.
Wow, just. Wow ! What a lot of work and nice results 👍🏻😁
Quality man, your range of engineering skills is enviable, might not beat the MIT cheetah motor, but that was like teams of phds, this is super impressive for one person iterating on a design.
I'm currently waiting for the eccentric cycloidal gear project. By the way, great work!
You handle frustration like a champ!
You are absolutely incredible and truly inspiring. Thank you
This is really cool. I actually made a 'non-internal' cycloidal actuator for my Capstone project in undergrad.
These explanations are anazing
Great video. You have a lot of faith in that actuator with those weights hovering above your laptop!
Well done on an interesting project well explained - subbed!
I have also same design idea back then but I don't have a 3D printer unfortunately and seeing it works is absolutely awesome!
Just well done ! Totallu brightened up my day with the completely pointless reason to build driven only by curiosity! A real inspiration !
Awesome video dude! Well done great production value, definitely sharing it with all my engineering friends
Educational! Thanks for including the fails as well. Awesome design :)
this is the best class i have been in ever
Dude great channel! Can't wait to see your other videos
Inspiring video! Thank you so much for making this content!
Very interesting video!
Glad I pass the "probably clickbait" apprehension, and still watched the video!
Guys voice sounds like he should be doing shows on the discovery channel. Interesting video and great job putting this together.
Excellent work in every department!
Great video and beautiful posters.
I enjoyed the technical content and the humor. Good stuff.
Good job, Musa,really I like your work it's too much great I hope a big future to you.
I'm Rachid from Algeria 🇩🇿🇩🇿
Your video was so informative, great job! Subscribed!
Really cool! This deserves way more views.
yep I could watch this all day.
This is just AMAZING! So cool!!! I will make one and find the system properties to make it run on a MPC algoritm! No integrator windup and optimal control in one!
A superb video (A for effort), I am absolutely inspired!
Well done. Good experimentation. 👍
This is nothing short of amazing, hat's off to you sir!
Awesome video and amazing project as always!!
I was building my own CNC machine but I can tell you how frustrating making mistakes can be. Had to tear it down three times and begin from ground zero. Thank God I completed it 😢
I see you doing great(er) things. Keep moving forward.. love seeing smart people, doing smart things. Awesome.
Great, now I'm late for work! Thanks for the outstanding video, I just couldn't walk away.
Terrific video and terrific engineering!
Great motor design, thanks for sharing with us 🙏
Bruh… so impressed by this!
What an awesome channel to find. Fuck yeah, thanks for going through the extra pain or filming and editing
You're a wild man!
You're a genius wild man!
Nothing can stop you!
This is the best CZcams video I’ve ever seen in my life
A next generation Jeremy Fielding. Great details ( complete w/ miss steps), theory and documentation. Thank you and please keep up the good work.
i usually dont comment much but i really like your video, straight to the point, calm talking and very entertaining :) thanks and big up
Great work ! You can make a really good robot arm with those actuator !
You're going places, young man!
Glad you never gave up and great video ahha. You got yourself a sub.
Man this is amazing content. Well done mate! You got yourself a new sub