New Plasma Cutter!!! Suncoo Cut 50!!!
Vložit
- čas přidán 30. 07. 2024
- My new plasma cutter suncoo cut 50, I bought this suncoo cut 50 plasma cutter because it was the best plasma cutter under $300 and would be good for cheap plasma cutter reviews! this is a cheap plasma cutter that actually works! in this video I show the plasma cutter unboxing, and the plasma cutter assembly. this suncoo cut 50 plasma cutter is the best cheap plasma cutter on amazon! The suncoo cut 50 is the cheapest plasma cutter for beginners that actually works!
-----------------------------------------------------------------------------------------------------------
I am using a Lincoln Ranger 225 engine driven welder as my power source
Welder review: • My Engine Drive Welder...
Radnor stinger
Radnor ground clamp
-----------------------------------------------------------------------------------------------------------
Adam's welding is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
I get commissions for purchases made through links in this post.
WELDING LEAD AMAZON AFFILIATE LINK:
DENSE CONNECTOR AMAZON AFFILIATE LINK:
WELDING GLOVES AMAZON AFFILIATE LINK:
JACKSON SAFETY WELDING HELMET AFFILIATE LINK:
DEWALT ANGLE GRINDER AMAZON AFFILIATE LINK:
TIG TORCH KIT AMAZON AFFILIATE LINK:
TIG TORCH CONSUMABLE KIT AMAZON AFFILIATE LINK:
SUNCOO PLASMA CUTTER AMAZON AFFILIATE LINK:
PLASMA CUTTER CONSUMABLES AMAZON AFFILIATE LINK:
PLASMA CUTTER CIRCLE CUTTER AMAZON AFFILIATE LINK:
220V PLUG CONNECTOR AMAZON AFFILIATE LINK:
PIGTAIL ADAPTER AMAZON AFFILIATE LINK:
-----------------------------------------------------------------------------------------------------------
Incase you are new to my channel.
I am Adam and this is my welding channel Adam's welding, I have been welding for a few years now and finally started up a channel on CZcams to show some of my personal work and maybe teach some of you a tip or trick i have learned along the way. I hope you enjoy my channel! If you like my channel like, comment, subscribe, and click the little bell icon to be notified of my future videos!!!
About my channel: • ADAM'S WELDING CHANNEL...
My welding rig is a 1990 f350 7.3idi dually, with a Lincoln ranger 225
Rig Walkaround: • My Engine Drive Welder...
Welder review: • My Engine Drive Welder...
FACEBOOK: / adamsweldingrig
INSTAGRAM: / adam_welding
-----------------------------------------------------------------------------------------------------------
Playlists:
Welding rig playlist: • ADAM'S WELDING CHANNEL...
Stick welding playlist: • Stick welding - Jak na to + styl
Hey I have added some affiliate links to my description go check them out!
Since they don’t supply the hose what size did you use to go between the barbed sitting and the regulator dryer? Thanks!
I used I believe it was 5/16 air line I cut it from a old air hose I had around the shop so I’m not sure the exact size
How is it still holding up ??
It’s holding up great! I have another video showing cutting with it and a third showing a follow up after 1 1/2 years of use and abuse
How is it holding up
Still use it all the time
Blue and brown both power on 240
Yes with the brown going to the wider blade prong and the blue going to the narrower one, the green/yellow goes to the ground
So now that I have this plasma cutter I should be able to perform jobs quicker and more efficient than with acetylene! So I hope you all like this video of unboxing the plasma cutter and hooking it up in the next video I will be showing some cutting with it and after that I will show the accessories I bought for it and do a review of each of them
I just bought acetylene, oxygen and a plasma cutter. I decided I really needed the gas for when I couldn't plug in. I bought a plasma that would run on 110v for thin metal and plan to use a small bottle of CO2 with a 110v MIG since it makes it so much more powerful and is a little cheaper than C25. Ideally, the small MIG would have an inductance control so you could make it virtually splatter free. Jody Collier recommends this setup for portable MIG without a 220v connection. He carries paintball cylinders which are refillable at Dick's Sporting Goods, but they sell adapters so you can refill yourself.
That’s awesome! Sounds like you are getting quite the setup going!
I would like to see a homemade air dryer project. I've been looking at old computer desktop cases as a shell.
Hmm I have a idea there is s silica desiccant that can be put inside pvc filter tube or something to make a air drying chamber
@@adamswelding5052 yeah, then you can redry it in the oven over and over.
Yup we use them at my shop for bed liner chemical airlines because that has to stay at as low of humidity level as possible
I got mine wired up and running. No time to test it out yet. Pretty sure I will need another air compressor. I have a pan cake nail gun type
You can use a pancake compressor, for short cuts! As long as it profuces 60 psi, and 30 cubic foot a minute and most air compressors can produce that during run time while refilling it
@@adamswelding5052 oh ok cool. Thanks
So you can always try it it might work for you if it doesn’t it should only burn out consumables faster but shouldn’t damage anything
@@adamswelding5052 That is what I will do Adam. So I have a welder. Been practicing stick. Have a 9000 watt generator with a 240 converter adapter. Now a plasma cutter. I operate another small business. Thinking about blending in welding with it. Just have to get good enough at it. I dont have a gas tank yet to run the mig and tig. I love the challenge with stick
Shit I came to see it work!! Not come outta da freakin box!! So how do I find the next one of you actually reviewing it. ( working)
You can look under my videos it’s the one I posted right after this one
Best Plasma cutter under $300! Plasma Cut Tests!!! czcams.com/video/7SiayKJySvo/video.html
Is this the only low budget plasma there is?
No there are others but in all reality all the cut 50 plasma cutters are the same internally but the build quality can vary this is one of the better build quality machines.
That being said the Hf start ones are more reliable than the pilot arc ones from what I have seen
your adapter, is this for your home? or what you think you will run into outside your home? if planning to carry it to job sites? or powering with a generator? I have seen over a dozen different styles of 220 outlets, but there is 4-5 more common than others
3 prong and 4 prong is commonly used for dryer plugs and typically used in some garages to power tools. We have several 3 prong plugs at our shop and my Lincoln ranger has the 4 prong style but I already had a different style that goes from 3 prong to 4 prong(not sure on the name but it’s the round style smaller generators use) but yes will be using on job sites when I get a gas powered air compressor
gas powered compressor? I would almost try to carry an electric if I could, depending on requirements, I do have a gas one, but it is HEAVY! but it was what was used on service truck to repair 18 wheelers, it has 1000 amps of cranking power, electric generator, & a 23cfm air compressor made by GOODALL. of course my Lincoln Ranger 9 has a 220 outlet, but I never got adapter for it, finally had a little time to even work on it last week to get it back in shape, I work too much, or it has rained when I had time, & it has sat since 2012.
Yea there are a few I’ve looked at but could build a gas powered air compressor cheaper than buy one! Have a older electric air compressor that is run by a 3 horsepower electric motor and I can easily pull the pull off of it and the air pump and find a ratio that will make a small 212 predator motor work in its place
well if you do a home built gas compressor, put an unloader valve in it!!!! so it cant cause an over pressure issue & blow up. the unloader just allows all air being made to vent to atmosphere, once tank pressure is met, & it will close and open as necessary to maintain tank at correct pressure.
Already has on of those valves in it this is a old machine older than I am it runs constantly from the second it’s plugged in don’t know might be someone else’s homemade project