LEMO FOX Mini-Z | RX28 - 2500KV Setup | June 2024 Layout

RX28 G1 - 2500KV | Blinky Mode
Track Size: Medium (24x16)
Front:
White/Silver Springs (soft)
.2mm caster shim
Toe out
PN 19mm F1, 0.5mm offset, 8.5mm rims
PN KS1042 trued via PN tire truer v3 (taped)
0.8mm droop
1.9mm ride height
Middle:
GL ESC Blinky mode
3 grams added weight in battery weight
Pink center spring
0.5mm droop
Rear:
Black Side Springs
1.9mm ride height
CF lower pod plate
Rocket 2500KV (or PN 2500KV) motor
13T PN long pinion
53T Spur
Kyosho Ball Diff - Ti Shaft
RR 11mm +3 rear wheels
Marka 20 Radials (taped) or worn out Marka 15 Radials (taped), Marka 5 and 10 slicks (glued)
Grease: Kyosho 30K blue all around
========
Front wheel - PN F1 19mm, +0.5mm offset:
www.kenonhobby.com/PN-Racing-...
Rear wheel - PN F1 20mm, +3mm offset:
www.kenonhobby.com/PN-Racing-...
Front Tire - PN Firm full size KS1042:
www.kenonhobby.com/PN-Racing-...
Rear Tire - Marka 15 Radials:
www.microrcsyndicate.com/prod...

[@rcstockum8154]

Enjoying all your great content! Thank you for the insight into the hobby!

[@tjaymacRC]

@@rcstockum8154 Glad you’re enjoying my videos! You’re welcome and thank you for commenting.

[@martinvillagomez6873]

Great video Tj!
Thank you.
What’s the benefit of the shock position?

[@tjaymacRC]

Appreciated that Martin, thank you!
Highest position: More body roll. Spring is more linear.
Lowest position: Car drives more "flat". Spring is more progressive.
The benefit is so that a driver can choose which settings he wants or set a car up depending on the track layout and traction of the track. For example, if the track has highspeed chicane and the traction is high, you want to try the lowest settings. This will make the car to transition in the chicane a lot quicker than it would in the high position.
I use the high position because I prefer a car that rolls into the corners. A point and shoot driver would prefer the mid to low settings for that quick/snappy steering feel.

[@ethanmartinez5339]

Great video Tj!
I was wondering I see your not running the hard case battery is there a reason you don’t run it?
Thank you!

[@tjaymacRC]

Hi Ethan, thank you!
I started using these GNB's before the hard case were available. I haven't really looked at any other batteries only because the ones I'm using are working out for me.