4th gen 4Runner Build 😎
Vložit
- čas přidán 5. 09. 2024
- Started this project couple years ago this is what I got so far.
Roof rack: www.4runnerlif...
ARB bull bar: ARB Deluxe Winch Front Bumper I 2003-2005 Toyota 4Runner Front Bumper
Snorkel: Dobinsons 4x4 Snorkel Kit for Toyota 4Runner 4th Gen 2003-2009 4.7L V8 - Dobinsons Direct
3” Lift kit: ( This kit also comes with the diff drop) TTAFCS-HA-0309 - Toytec/Bilstein coilovers for 03-09 4Runner
Sway bar relocation: www.toyteclift...
1.25” Wheel spacers: (this kit only comes with two I wanted all four with wheel spacers, so I had to purchase another set.) 1996-Present 4Runner
Tire set up: 285/70R17 Cooper STT Pro
Wheels: Stock 2005 4Runner 17” hubcaps removed and painted black.
Ditch light: www.4runnerlif...
Man’s best friend right there!
You got that right lol it’s lonely at the top. 😂
Great build 👏👏👏
Thank you! 😁
Nice looking rig bro
Nice rig dude. I have a stock 06 and just got the 1” body lift kit that I will install this weekend. Do you still recommend getting a diff drop even though I’m only lifting an inch?
@@peteramara with a body lift you don’t need to drop the differential since you’re not messing with the suspension. I actually just installed a 2 inch not too long ago. It wasn’t too painful, but I’m glad I did the stock bolts that hold the body to the frame were pretty much shot.
You did such a great job! Looks bitchen!
Can u list all mods for front end suspension. I also am having issues with inner cv boots tearing, thx in advance
Differential drop kit, Swaybar relocation That’s probably all you need to fix the CV axle boot from tearing.
For the differential drop I just got one off of Amazon and the sway bar relocation I got from toytec. Very cheap and easy install. When you do get the relocation kit for the sway bar, you might need to shave down some of that aluminum, the passenger side frame there were some welds that were causing the block not to seat correctly. If you shave off a little bit of that aluminum, it will fit perfect. It’s a lot easier to shave off aluminum then it is to shave off welds on the frame.
I already have the diff drop , I'm hoping the sway bar relocate will resolve the issue, have the same 05 limited v6 . With ome an also have a set of ome uca ready for install
@@robertorpinel7051 do you have a lift installed?
@@Mckean97 old man emu coils an bilstein 5100 all around, also have arb bumper which raked the front back down , so I set the front shocks to the highest setting to level out the front, so I probably have a little more that 4 inch lift in front
How many miles you got on that beaut?
185,000
What puck style lift kit did you use . Was it actually 3 inches?
It was a rough country lift and yes, it was a 3 inch lift, but don’t recommend going that direction on stock suspension
@@Mckean97 got ya. Im def torn. I dont mind the puck style but I want a good ride too bc this will be also a daily. So im leaning towards bilsteins.
what upper contorl arms?
JBA upper control arms . I forgot to add that into the description
How many miles did it have when you bought it?
140,000
@@Mckean97 I've been wanting to get my first "truck" and I was wondering how many miles is too many miles for a toyota to still be upgrade worthy. I don't know much about trucks but I wanna get a 4wd as a 2nd vehicle just for traveling, camping, fishing, shooting in blm lands, etc.
Toyotas are pretty reliable even if you do have to step your foot into a 200,000+ mile vehicle it shouldn’t really have any problems. Just make sure that the maintenance was done to it. Such as timing belt/chain, water pump, and all the essential items. If there is no record in it, I would definitely recommend getting those done as soon as possible.. good luck on your search!
@@Mckean97thanks
Snorkel is fake?
snorkel is real and all hooked up on the air box.
ruggedoutlander.com/products/dobinsons-4x4-snorkel-kit-for-toyota-4runner-4th-gen-2003-2009-4-7l-v8-and-v6