Not a bad video / but there are a few things I would like to teach ALL newcomers to the business / #1 - Hidden Hangers / there good if used in the right place / it is NOT the strongest hanger that is made and is not good for areas where it snows / I noticed pine trees in the background so I'm going to assume it snows there / for the best hangers for a snow area / go to Lynch Aluminum and have them send you a sample of the " Heavy Duty Brute Hanger with the Strap" I don't think you will be able to find a better hanger ANYWHERE / he also shows putting the screw (of the Hidden Hanger) into the gutter before he hangs it / I would not do that / if the screw is sticking out even just a 1/4 inch past the back / the gutter will get caught up on the fascia board while it's being installed / when the gutter is in place / then put the screw in / he also shows a few ways to install a end cap / I do like it when he talks about the cap coming off if you do nothing / do not put screws in the end caps / just looks bad / use the tool " end cap crimper" looks much better / pops are OK but it takes much longer to install / lets move to the outlet cups / the way he shows will work but there are 2 faster ways that look and work much better / first is a hole saw / ALL gutter supply house's carry them / a 2-3/8 inch or a bigger one a 3 inch hole saw / just cut the hole where you need it to be and drop your outlet cup down and it's done / 2nd way to make a hole in the gutter for a downspout is a downspout punch / thay cost a bit but if you do not lose it / the tool will last you the rest of your life / mine is going on 50 years old / lastly is the caulking / I personaly do not like calking in what looks like a tooth paste tube but that is just me / I like a real caulking tube that fits into a caulking gun / and my caulking of choice is the Geocel brand / caulking is just a matter of choice / most work good / Geocel has NEVER let me down since 1977 / so that is it for now on how to install what you just saw / you can go to my website at / www.RainGuttersByRock.com / and just a bit of advice to ALL of you Pros out there / STOP doing bids for FREE / my website says wright on it / I'm not the cheapest but I do think I'm the best, and I charge $20 for a bid / I have only had (2) people tell me NO since 2012 / all the rest pay me my $20. you can also read about some of my ideas in Gutter Enterprise / which might be the ONLY Gutter Magazine that is printed today / also look up my ( Cost Calculator in the Jan/Feb issue on page 20 ) / it will save you from running out to each and everyone who calls you / some just want a price and then like to think about things / it's a really helpful tool / copy it if you want / I'm giving it out to the gutter world / use it. Thanks for reading this / and no hate emails please / all the advice I'm putting out here is from 50 years of installing / there just the way I do things / pick your own path / Thanks Again / Rock.
Hi.It has been so long since i made gutter I started a Bus.in Italy around 1987 just south of Rome..When i started there was another guy in southern Italy.There was only two of us making gutter for about 5 years here in Italy.Before us they made gutter in galvanize steel in 4 meter length with benders. I started with two machines made by Knudson out of Colorado. One used of 25 cm wide coils and one 38 cm. Around 1993 i had an american mfg make me a bigger machine that used 50 cm wide coils.The guy in southern Italy made down tubes and elbow,i made brackets,end caps etc,we would exchange products. In late 1998 i got tired in making thousand and thousand of meter of gutter.Sold the business and retired. I had two trucks one had the 25 cm and the 38 cm side by side.The other truck had the 50 cm,We would go on site cut and drop and do the installing later,or we would outsource the installation.Ciao from 70 miles south east of Rome Italy
And that’s why it’s absolutely criminal to ask $30,000 for putting up 411 linear feet of gutter (and 13 downspouts). Oh, and that was the best price after being talked down from $40,000! Skip college kids. Go into the trades.
why not attach the outlet from below the gutter, not inside, so that a lot of fine debris like dirt wont get trapped. also can the machine make different shapes of gutter?
Great video, I did guttering decades ago, we use to call those crimpers snap locks and there was a punch for the outlets I don't think you got a lot of gain out of it, I love the new type of hangers we used to have to use spikes and ferrules.
When you use the crumpets for the end caps make sure the black side of the crumpets stay on the inside most part of the end cap not out, just a heads up! Beautiful machine man
I've been installing gutter for a little more than 2 years. We space our hangers out a little bit further than 2 ft and we haven't had any issues so far and the only other thing we do different is we don't hook the hanger onto the back of the gutter. We just leave it inside the gutter and shoot through the back into the fascia. When we put on our end caps we use cramps instead of screws but the way you do it works just as well. Can I put my downspouts up I don't use a drop outlet. I trace the perimeter of the elbow into the bottom of the gutter then I cut a x through the middle of it and fold the tabs down and it's just a lot faster and it saves money on material and overhead. I use drop outlets only when I'm putting drop outlets on structural gutter when we build pool enclosures or poly roofs
"...and ahh, if you don't do any of these, you can just put it on there and it'll just fly right off the side. So, that's option stupid!" hilarious and appreciate the laugh. Great video.
This guy cracks me up! I think he could have his own show on TV :) I like when he says there are 'three' ways to attach the end piece.....and holds up two fingers. Hilarious! I think he would be fun to work with. LOL @ and don't forget....'COFFEE'. I'm done. haha
I just had the top of my chimney removed to the roofline. The remaining part will be for storage, but it sticks out about 20 inches. Can they make a 40 foot gutter that curves about 2 feet in the center? I'd like one continuous gutter.
I have not done a curved gutter. Not sure it’s possible. I suggest adding a diverted on the roof line to divert the water to either side of the curved area which could dump the water into the gutter on either side of the curve. Hope that helps if not sorry in advance🤘🏼
Looks like a iron man machine i have one my favorite was the job sight i had. With the iron man you can't let it get overly hot in the summer the neoprene rollers can melt.
All of you thinking about getting into the Rain Gutter business / DO NOT BUY A TRAILER / get a van / (1) it keeps the $12,000 machine out of the weather / (2) you can lock up ALL your tools and not have to empty out your truck every night / and (3) someday you WILL get in a tight spot and you will be glad you bought a Van. Yes, a van costs more / but it will pay for itself.
We currently just buy the elbows...however we plan to purchase a machine to make them out of the spouts. It doesn't really make sense to buy one of these machines because (they are expensive) you need to make a crap load of elbow before you get a return on your investment. When we get that machine we will post that thing for sure.
Great video I really like the set up but my question is with a van already being pretty low to the ground can you print 100 ft gutters with out eventually hitting the ground?
yeah sometimes the gutter will hit the ground so what i do it make sure the truck is as flat as possible (on level ground) or if thats not possible adjust the truck so that it will not hit the ground.
The best way to install the gutter machine in a van is to put it on top of 4X4s / it gives it a lift and makes long runs much easier / and this is to the public / the pros know this already / NEVER use a screw to install an end cap / C'MON MAN
We purchased this online @ buymbs.com/ and had it shipped to our supply house and I asked them to load it on the truck..if your close to the KWM location I think you can go pick it up.
The van is a ProMaster 2500 159 wheelbase...We use a forklift to load the coils off the side of the truck (its super easy) ....Trailers r nice too (buying the truck and outfitting it will be more costly than a trailer so financially... assuming u already have a truck to pull the trailer...its cheaper to do a trailer) Either way u will be printing money!!!
@@LogosFarm The coil that fits on these spools are about 360-380 pounds ...u can take a 2x4 with 3 people run it through the middle and pick them up and put them on the machine. I would not do that tho. The other option is have your supply house load it on the machine. or what i did was use an engine hoist for a while.
This is in a doge promaster 2500 high top (not sure about the wheel base but it the biggest one they make) I can load the machine through the side door. On this machine I have 2 spools to hold coils. Once is set for 6" and the other is for 5" coils. If u do this type of setup make sure u purchase a transfer bar (its basically a bar that allow you to put a coil on the bar and slide or roll it to the front spool and vice versa. We chose to put it in this van because it was a vehicle we had sitting around and it worked great. That said you would be good with a trailer if you cant dedicate a truck to the machine. Make sure the trailers dimensions will fit the machine and make sure it will hold the weight and that you truck can pull the trailer loaded with coils and machine weight. I think you would need a 2500 with a beefed up suspension or a 3500. Dont use a 1500 it will blow up. Good luck bro
Is there a machine that makes seamless round gutters? I am planning on hiring someone to install them for me and want to avoid K style gutters. Not that they are bad but round gutters are a little easier to clean due to the lack of edges. I'm willing to pay a premium for that little bit of convenience. yes, I know that all gutters require maintenance. neglected gutters will go bad quickly.
Yes ...its most likely going to be hard to find a place that offers them seamless in half round (the machine can cost around 40k) so there are few places that offer that service...We offer it however don't own the machine ...we sub it to a company that just runs these out of a truck. We don't have a huge demand for Half rounds so it makes sense to do it this way for us.
I don’t recommend the hangers in the video the screw has no washer we see so many homes with rooted wood because of those hangers use The same screws they use for metal roofing their metal to wood and have a rubber washer that’s waterproof
We have never had the issue of the wood rotting because it doesn't have a washer....Most roofs have a drip edging that goes on top of the gutter and over the hanger to protect water from getting into the hanger screw and to allow for proper flow of water into the gutter not behind it. Send us a link to what hanger you use...we are interested regardless...we always look to better the materials we offer.
I throw all the hangers like that I come across in the trash. I find too many of the screws broken. Clipping the hanger on the back of the gutter adds it's own complications and I never do it. I'm not at all interested in hanging fast I want it to hang tight. Therefore when I got to know Hangtite hangers from Raytec and in fact won't do a gutter job without them. When I was done with my last job I invited the customer, the owner of the lumber yard out and told him that right then I'd hang off my gutter and if it fails I have nothing to charge him for. Huh I just figured out how to make the oval outlet hole that comes with a Mason cover. no, no I didn't I throw them away too and use a 2 3/8 outlet and instead of wasting all this time cutting a hole I'll stick to using my hole saw and be home eating supper before this guy's done fucking around.
Wouldn't the washer just seal where the screw contacts the metal on the hanger istself? I mean with the type of hanger that clips on, and requires you to fish the smaller screws out of your pouch, hold it in place to get it started, and then drive it in, im not talking about the ones in the video that come pee inserted into the hanger. So as far as the part that the back a sees, is at not exactly the same? The part in the facia is the threads on the back side of gutter, after it has passed through the hanger, and then the back of gutter. So wouldn't the facia see the exact same thing regardless of which screw, or hanger you used? The neoprene would just seal the surface it was in contact with. Also aluminum is pretty soft, seems like a screw holding tight aluminum to wood would make a pretty water tight seal as well. Especially on a vertical surface. And then 2 more points, the hangers in the video are bent around into a tube that the screw loosely passes through, and the screw is like 3" long. That tube, along with the bull nose in front, and the bend upand over the back make a noticeably stronger hanger. Ho could it not? More bends, especially loose bends make stronger sheet metal. Right? That much longer screw which is steel, also holds tighter, and does have a flange built in making it grip that hanger tighter than your scout leader when you were his special assistant that unforgettable summer. It also keeps the head out front of where the shingles overhang, so water is not dripping right on the head. The other hangers with a 1" overhang, and a hex head screw leave about 3/4 inch over the screws im sure water could drip back on them a bit, though I can't seen it causing too much a problem. somebbozos hang the shingles over 2 knuckles which causes them to droop into gutters, looks teriible, leaves little room for your hand to clean them, and on retrofits, causes careless instalers to break the shingles trying to get a screw drive underneath. Exaserbated with the older style hanger. Could the leaks you are seeing be caused by something else? Like 4' apart hangers sometimes cause the bAck of gutter to fishmouth, and form a pocket where shingles drain behind the guttdr? Some regional practices are to hang with no facia. This is a similar situation to 4' apatlrt. Obviously won't rot facia if one don't exist, but tails? Also sometimes roofsrsninstall new con before facia, then facia is installed and shingles no longer hang over. Problematic. Ive only Biden doing gutter a few years, but ive been roofing for 30, and been a roofing contractor for 14. Ive never den the problem you speak of with these hangers. In my opinion they are the cats aSs. I havnt ever seen a problem with the ones you are talking about either. With or without gromets. Spikes and ferrules, ive seen on any roof that has them, as I pretty well only do resedemtial reroofs, and only install gutters on homes in reroif. Never new construction. I can charge much higher prices, and gide the cost in the overall roof quote, and customers are happy as regardless my prices for roof+ gutter is still much lower than most others roof only, and everything gets done in one shot, at same time. It could be you are in a much damper climate than I am as well. Im about 30 miles west of Seattle, so pretty arid in these parts
Also your gonna throw the adjustments off the fron of machine not having it on a stand and just letting it hang out over 4 or 5 feet. Just saying. Cool video tho. Love gutters and seeing how diff people do them.
A business license is recommended it is required by most if not all states and in some areas you will be required to get a building permit for the work performed.
5k holds 1.2 gallon of water per ft and 6K holds 2 gallons of water per ft this is a 60 to 70% increase of water per ft. Really the style of roof (shingle/metal/cedar) and the Pitch of the roof (low slope vs steep pitch) and the length of the roof ( 1ft vs 60ft or more) and the roof material overhang (1/2" vs 3" plus) and the size of the fascia board (4" vs 12" plus) all determine if you need a 5" or 6" gutter. You can get all nerdy or just go bigger...to cover your ass.
Had a guy come out with a similar machine. Installed gutters galvanized, 6 inch, on standing seam metal roof, ranch style home, straight 55ft front and back. Simple? The bottom of the gutters look like the ocean … wave after wave. 30 crumply waves on bottom of gutter out front, and 21 waves on back roof gutter bottom. What the hell did he do? My wife complained to him, but I was at work. Dude is gone. Now what?
Not all the machines are capable of bending Galvanized metal...the machine in the video does. It is also possible that the machine they had was not tuned up or needed some work done to it. As with any workmanship issue when the company wont respond and has disappeared you are screwed. Its an unfortunate hard thing to hear but u can live with ugly gutters...which most likely work fine...or have them replaced by someone that has lots of online reviews... that are 4 star or more on google...this sucks...I hope that helps even though I am sure you didn't want that answer. Thanks for following and posting.
@@CertitudeHI Thank you for your response. We live in Del Rio, TX. Many fly by nighters here. He only got paid for half the job. I’ll have to add my own downspouts, but following your CZcams vids will assist me. Thanks again.
There is only one way to put end caps on and that is end cap crimpers with a bead of caulk you spread with your 6” ferrule that you crushed the top flat using your hammer
Your almost correct / you want to first put the end cap on ( less mess ) / then seal / if you seal it correct it will last for years / I have been installing since 1977 / I know...
Instead of using outlets just cut your hole smaller and make tabs out of the extra metal and rivet the elbow to the tabs. Caulk the corners if you cut your hole too big
@@CertitudeHI you’re probably not gonna see this but what package do you recommend getting with the 5 and 6 combo like guillotine and reel packages and stuff!
If you get a used Promaster 2500 high top with the 169 wheel base with like 75k miles it would run you about 20k based on the year....The machine itself is about 14k then add the accessories, transfer bar and 2 coil holders which will be around 1k ...then you need to get a generator that at least is a 5000watt to run the 6k gutter coil (1k) through the machine and then get 2 coils one 5k and 6k which ($1400.00) and then get hangers end caps and all that stuff ($1k) ...and you will need an engine hoist ($400) or a fork lift to put the coils on and off the truck...a used fork lift can be about 4k to 8k based on the model you will only need a 3000lb rated fork lift...we have an propane one but now you can get full battery ones. All in to be up and running I would have at least 35 to 40k for a gutter truck setup. If you have the sales and sell jobs at a 50% profit margin...it should pay for itself if you produce $80,000 worth of gutter installs.
The crimp holds up perfectly fine. Especially after caulk.. getting them off in order to add on more gutter to an existing install is a battle sometimes. I use needle nose pliers and spin them like I'm opening a can of sardines in order to get them off. Lol
I'm watching this, cause where I stay a company named 'Leaf Filters', is offering $4000-$8000 a week for qualified gutter installers, but you have to already own your own gutter machine. I guess what they do is provide you the business. So ye, that kind of perked my interest, but I'm sure there's more to it than that.
A bit late, but don't believe a word they say about pay. That's the pay (probably) for an entire crew and if you can do 2-3 jobs a day...also very unlikely. I did their leaf filter installs and was told 500 a day...yeah that's if you can somehow manage to do three jobs a day that included full cleaning, resealing joints and then install with a bunch of extra hangers installed as well. Each job ended up taking about 4-5 hours with all their extra bullshit, photos, paper work, and installing all the extra hangers equalling about one hanger per foot. I'd like to hear your experience. There is something to be made but it's far less than what they hook you in with. There's also something to be said about a company that provides jobs...but they are very sketchy about pay per job...please let me know because I considered approaching them with "I have the extruder, but no crew. I will churn out the product for x dollars flat fee and move on but I will not install...just extrude and go to the next job." Something like 300-500 per job. Let me know if you worked for them.
Some make it sound easy. But not all gutter jobs are that easy. Ive been looking for those 40' ladder jobs that the gutter has ben stapled down. Not fun, not easy.
Dope review! I’ve been wanting to start my own Gutter LLC this video is really useful in beginning stages of gutter installation!🙌🏽
Glad it was helpful!
Did you end up doing it? Looking into doing the same
Straight to the point!! Good job!!! Keep it up!!!
Thanks man!!!
Not a bad video / but there are a few things I would like to teach ALL newcomers to the business / #1 - Hidden Hangers / there good if used in the right place / it is NOT the strongest hanger that is made and is not good for areas where it snows / I noticed pine trees in the background so I'm going to assume it snows there / for the best hangers for a snow area / go to Lynch Aluminum and have them send you a sample of the " Heavy Duty Brute Hanger with the Strap" I don't think you will be able to find a better hanger ANYWHERE / he also shows putting the screw (of the Hidden Hanger) into the gutter before he hangs it / I would not do that / if the screw is sticking out even just a 1/4 inch past the back / the gutter will get caught up on the fascia board while it's being installed / when the gutter is in place / then put the screw in / he also shows a few ways to install a end cap / I do like it when he talks about the cap coming off if you do nothing / do not put screws in the end caps / just looks bad / use the tool " end cap crimper" looks much better / pops are OK but it takes much longer to install / lets move to the outlet cups / the way he shows will work but there are 2 faster ways that look and work much better / first is a hole saw / ALL gutter supply house's carry them / a 2-3/8 inch or a bigger one a 3 inch hole saw / just cut the hole where you need it to be and drop your outlet cup down and it's done / 2nd way to make a hole in the gutter for a downspout is a downspout punch / thay cost a bit but if you do not lose it / the tool will last you the rest of your life / mine is going on 50 years old / lastly is the caulking / I personaly do not like calking in what looks like a tooth paste tube but that is just me / I like a real caulking tube that fits into a caulking gun / and my caulking of choice is the Geocel brand / caulking is just a matter of choice / most work good / Geocel has NEVER let me down since 1977 / so that is it for now on how to install what you just saw / you can go to my website at / www.RainGuttersByRock.com / and just a bit of advice to ALL of you Pros out there / STOP doing bids for FREE / my website says wright on it / I'm not the cheapest but I do think I'm the best, and I charge $20 for a bid / I have only had (2) people tell me NO since 2012 / all the rest pay me my $20. you can also read about some of my ideas in Gutter Enterprise / which might be the ONLY Gutter Magazine that is printed today / also look up my ( Cost Calculator in the Jan/Feb issue on page 20 ) / it will save you from running out to each and everyone who calls you / some just want a price and then like to think about things / it's a really helpful tool / copy it if you want / I'm giving it out to the gutter world / use it.
Thanks for reading this / and no hate emails please / all the advice I'm putting out here is from 50 years of installing / there just the way I do things / pick your own path / Thanks Again / Rock.
Man I really like the idea of having the machine in a work van, especially in the city, having a trailer sometimes is too much
I agree with You
Gotta be fun loading 6” coils
@@primages45 not hard they drop it right on your cradle with a fork lift
What kind of van would work best?
Hi.It has been so long since i made gutter I started a Bus.in Italy around 1987 just south of Rome..When i started there was another guy in southern Italy.There was only two of us making gutter for about 5 years here in Italy.Before us they made gutter in galvanize steel in 4 meter length with benders. I started with two machines made by Knudson out of Colorado. One used of 25 cm wide coils and one 38 cm. Around 1993 i had an american mfg make me a bigger machine that used 50 cm wide coils.The guy in southern Italy made down tubes and elbow,i made brackets,end caps etc,we would exchange products. In late 1998 i got tired in making thousand and thousand of meter of gutter.Sold the business and retired. I had two trucks one had the 25 cm and the 38 cm side by side.The other truck had the 50 cm,We would go on site cut and drop and do the installing later,or we would outsource the installation.Ciao from 70 miles south east of Rome Italy
I used to do gutters and by far the best job I ever had and if you have a outstanding boss that makes it all the better worked westvirgina ky. Ohio
Gutter Done Brother!!!!
Thanks for Refreshing My Memory i just Applied for a Job Working With The Same Equipment..
Glad I could help
"Option Stupid" Perfect use of the word stupid. The way he said it reminded me of Transformers "Planet dirt".
LOL
And that’s why it’s absolutely criminal to ask $30,000 for putting up 411 linear feet of gutter (and 13 downspouts). Oh, and that was the best price after being talked down from $40,000! Skip college kids. Go into the trades.
You the man bro💪🫡
why not attach the outlet from below the gutter, not inside, so that a lot of fine debris like dirt wont get trapped.
also can the machine make different shapes of gutter?
" Let's gutter done" 🤘😎
j'adore ce que vous faites super bien
Badass.
I’m no contractor or gutter guy just curious 🧐 how they do it . OUTSTANDING
THANKS!!
Show how You make corners brother! This is good
Great video, I did guttering decades ago, we use to call those crimpers snap locks and there was a punch for the outlets I don't think you got a lot of gain out of it, I love the new type of hangers we used to have to use spikes and ferrules.
Yeah those spikes suck compared to hidden hangers
Should you add caulking to the endcaps?
hi! just wanna ask, where you bought that machine? thanks
Looks good dudd
I liked it, So is it easy to be Gutter installer? I have a job right now, but I like to change my career. Thank you in advance.
Very good video. Excellent content. Thank you! A+
Much appreciated!
Whats the name of machine.
Great informative video.
Can you do an instructional video of installing gutters to one side?
I am interested where I can buy a similar machine
When you use the crumpets for the end caps make sure the black side of the crumpets stay on the inside most part of the end cap not out, just a heads up! Beautiful machine man
thx for the tip
I laughed way to hard at "ummm.... I don't know what just happened to the camera?!"
lol
I liked your video... keep up the good work. Ernie
Thank you very much!
Best video
Pop rivet is the best for the end cap
I've been installing gutter for a little more than 2 years. We space our hangers out a little bit further than 2 ft and we haven't had any issues so far and the only other thing we do different is we don't hook the hanger onto the back of the gutter. We just leave it inside the gutter and shoot through the back into the fascia. When we put on our end caps we use cramps instead of screws but the way you do it works just as well. Can I put my downspouts up I don't use a drop outlet. I trace the perimeter of the elbow into the bottom of the gutter then I cut a x through the middle of it and fold the tabs down and it's just a lot faster and it saves money on material and overhead. I use drop outlets only when I'm putting drop outlets on structural gutter when we build pool enclosures or poly roofs
Are you charging by linear foot? And if so how much?
We used to solder everything and used a hand crank gutter maker when I did it years ago way different now a days
"...and ahh, if you don't do any of these, you can just put it on there and it'll just fly right off the side. So, that's option stupid!" hilarious and appreciate the laugh. Great video.
thx man!!!
How do you price by foot or by house side
"GUTTER DONE" OR "ALMOST CUT MY FINGER OFF" should be on a t shirt. Awsome video brother
YES...GUTTER DONE!!!!
Hard to believe you didn't caulk the endocap or drain.
They make punches for any kind of outlet.
Stop with the lies.
Great video
Thanks!
So y'all use a machine to make the downspouts, or buy them separately?
Great vid btw. Short, and to the point!
Buy them separately in boxes of ten x 8ft
@@benm12310 Could you use a jig or sawzall to make the hole for the outlet to the down spout? Or are the snips the ideal tool?
Just but the downspouts / the machine cost a lot and to me is not worth it
You like the van better than trailer? I have a trailer but young employees so been thinking about the vans?!
This guy cracks me up! I think he could have his own show on TV :) I like when he says there are 'three' ways to attach the end piece.....and holds up two fingers. Hilarious! I think he would be fun to work with. LOL @ and don't forget....'COFFEE'. I'm done. haha
Thx .... just out here making gutters & drinking coffee
Nice good work
Thank you so much 😀
buen dia cuanto cuesta la maquina estoy interesado
How much it cost to start this business and how much you made a year
No wonder this got so many views, keeping the business fun. I like that, keep up the good work!
OH YEAH
What size sprinter van do you have? I’m looking to move from a npr for better fuel mileage.
That option stupid and lazy lol I like him
What brand machine are you using?
5/6" KWM IRONMAN
Good video. Ignore the hater below
Have you tried caulking the outlet/end caps? That’s what we do and have never had a call back.
Yeah we caulk all those!!!🤟
that metal looks sharp as all hell. How often do you cut yourself? Do you ever have to get stitches?
I just had the top of my chimney removed to the roofline. The remaining part will be for storage, but it sticks out about 20 inches. Can they make a 40 foot gutter that curves about 2 feet in the center? I'd like one continuous gutter.
I have not done a curved gutter. Not sure it’s possible. I suggest adding a diverted on the roof line to divert the water to either side of the curved area which could dump the water into the gutter on either side of the curve. Hope that helps if not sorry in advance🤘🏼
Looks like a iron man machine i have one my favorite was the job sight i had. With the iron man you can't let it get overly hot in the summer the neoprene rollers can melt.
Never had that issue but...thx i will keep an eye on it
plus the new rollers do get dirty / it puts marks on the gutters / the job sight WAS the best / I had one.
Not sure where you live / but it will get up to 125 degrees and the rollers do not melt
What about angles
Very helpful vid
Thx
What a slow way of doing gutters.
Thanx for this upload. Quick question, What's name make and model of that particular machine?
5/6 KWM Ironman ...if u search through the comments u might find some other helpful tips too.
What company is your gutter machine from?
its the KWM Ironman 5/6k machine
Please what is the name of machine?
KWM Ironman 5/6 but they have many others to choose from based on your needs...
how cost that gutter making machine? and I get one?
depends which one u get...do a search online or at a local distributer.
how do I get started in this, like to learn ? school ?
How long is your machine? What is a good size enclosed trailer that will hold material, stock, tools, ladders ect..? Minimum size ?
All of you thinking about getting into the Rain Gutter business / DO NOT BUY A TRAILER / get a van / (1) it keeps the $12,000 machine out of the weather / (2) you can lock up ALL your tools and not have to empty out your truck every night / and (3) someday you WILL get in a tight spot and you will be glad you bought a Van. Yes, a van costs more / but it will pay for itself.
Where can I purchase the gutter maker?
Where to buy the gutter machine ??
Got mine online and had it shipped to my supply house then they loaded it up into the truck.. now I have a fork lift but I didn’t at the time.
Hey man, do you have a separate machine for downspouts and elbows? Or do you just buy those at the store?
We currently just buy the elbows...however we plan to purchase a machine to make them out of the spouts. It doesn't really make sense to buy one of these machines because (they are expensive) you need to make a crap load of elbow before you get a return on your investment. When we get that machine we will post that thing for sure.
Do you work in North Highlands, Ca
Sorry but no we r in Pennsylvania near Philly
Great video I really like the set up but my question is with a van already being pretty low to the ground can you print 100 ft gutters with out eventually hitting the ground?
yeah sometimes the gutter will hit the ground so what i do it make sure the truck is as flat as possible (on level ground) or if thats not possible adjust the truck so that it will not hit the ground.
The best way to install the gutter machine in a van is to put it on top of 4X4s / it gives it a lift and makes long runs much easier / and this is to the public / the pros know this already / NEVER use a screw to install an end cap / C'MON MAN
If you put the gutter machine on a 4X4 both front and back when putting it into a Van it will lift it up and help with the longer runs
How to order the seamless gutters 5 k. Style?
We purchased this online @ buymbs.com/ and had it shipped to our supply house and I asked them to load it on the truck..if your close to the KWM location I think you can go pick it up.
Yes never forgot your coffee
Screws in the caps look bad. Crimps are what you are to use.
Nice vid.
What kind if van?
Is it hard loading your metal in on the side door?
Im stuck on if i should buy an envlosed trailer or Van
The van is a ProMaster 2500 159 wheelbase...We use a forklift to load the coils off the side of the truck (its super easy) ....Trailers r nice too (buying the truck and outfitting it will be more costly than a trailer so financially... assuming u already have a truck to pull the trailer...its cheaper to do a trailer) Either way u will be printing money!!!
@@CertitudeHI how heavy are the coils if one does not have a forklift available?
@@LogosFarm The coil that fits on these spools are about 360-380 pounds ...u can take a 2x4 with 3 people run it through the middle and pick them up and put them on the machine. I would not do that tho. The other option is have your supply house load it on the machine. or what i did was use an engine hoist for a while.
This is in a doge promaster 2500 high top (not sure about the wheel base but it the biggest one they make) I can load the machine through the side door. On this machine I have 2 spools to hold coils. Once is set for 6" and the other is for 5" coils. If u do this type of setup make sure u purchase a transfer bar (its basically a bar that allow you to put a coil on the bar and slide or roll it to the front spool and vice versa.
We chose to put it in this van because it was a vehicle we had sitting around and it worked great. That said you would be good with a trailer if you cant dedicate a truck to the machine. Make sure the trailers dimensions will fit the machine and make sure it will hold the weight and that you truck can pull the trailer loaded with coils and machine weight. I think you would need a 2500 with a beefed up suspension or a 3500. Dont use a 1500 it will blow up.
Good luck bro
Also invest in a hole saw my man. It will make the outlet holes a lot easier!
My company uses this big punch works great
Could you use a jig saw? Or sawzall?
Bro , it’s very cool video, may i ask you what is the brand of your machine and do you recommend to buy same ?
Also, I wonder if one machine can also work with plastic gutters?
Looks like a 5”/6” Combo from KWM Gutterman
What kind of gutter machine are you using?
KWM 5-6 Ironman
How much the price of this gutter machine.
Is there a machine that makes seamless round gutters? I am planning on hiring someone to install them for me and want to avoid K style gutters. Not that they are bad but round gutters are a little easier to clean due to the lack of edges. I'm willing to pay a premium for that little bit of convenience. yes, I know that all gutters require maintenance. neglected gutters will go bad quickly.
Yes ...its most likely going to be hard to find a place that offers them seamless in half round (the machine can cost around 40k) so there are few places that offer that service...We offer it however don't own the machine ...we sub it to a company that just runs these out of a truck. We don't have a huge demand for Half rounds so it makes sense to do it this way for us.
Is that a iron man machine?
How can i find a truck like yours in phoenix AZ that can come and cut the gutters to size instead of going to home depot?
I dont know but there has to be someone doing this there.
I don’t recommend the hangers in the video the screw has no washer we see so many homes with rooted wood because of those hangers use The same screws they use for metal roofing their metal to wood and have a rubber washer that’s waterproof
We have never had the issue of the wood rotting because it doesn't have a washer....Most roofs have a drip edging that goes on top of the gutter and over the hanger to protect water from getting into the hanger screw and to allow for proper flow of water into the gutter not behind it. Send us a link to what hanger you use...we are interested regardless...we always look to better the materials we offer.
I throw all the hangers like that I come across in the trash. I find too many of the screws broken. Clipping the hanger on the back of the gutter adds it's own complications and I never do it. I'm not at all interested in hanging fast I want it to hang tight. Therefore when I got to know Hangtite hangers from Raytec and in fact won't do a gutter job without them. When I was done with my last job I invited the customer, the owner of the lumber yard out and told him that right then I'd hang off my gutter and if it fails I have nothing to charge him for. Huh I just figured out how to make the oval outlet hole that comes with a Mason cover. no, no I didn't I throw them away too and use a 2 3/8 outlet and instead of wasting all this time cutting a hole I'll stick to using my hole saw and be home eating supper before this guy's done fucking around.
Wouldn't the washer just seal where the screw contacts the metal on the hanger istself? I mean with the type of hanger that clips on, and requires you to fish the smaller screws out of your pouch, hold it in place to get it started, and then drive it in, im not talking about the ones in the video that come pee inserted into the hanger. So as far as the part that the back a sees, is at not exactly the same? The part in the facia is the threads on the back side of gutter, after it has passed through the hanger, and then the back of gutter. So wouldn't the facia see the exact same thing regardless of which screw, or hanger you used? The neoprene would just seal the surface it was in contact with. Also aluminum is pretty soft, seems like a screw holding tight aluminum to wood would make a pretty water tight seal as well. Especially on a vertical surface. And then 2 more points, the hangers in the video are bent around into a tube that the screw loosely passes through, and the screw is like 3" long. That tube, along with the bull nose in front, and the bend upand over the back make a noticeably stronger hanger. Ho could it not? More bends, especially loose bends make stronger sheet metal. Right? That much longer screw which is steel, also holds tighter, and does have a flange built in making it grip that hanger tighter than your scout leader when you were his special assistant that unforgettable summer. It also keeps the head out front of where the shingles overhang, so water is not dripping right on the head. The other hangers with a 1" overhang, and a hex head screw leave about 3/4 inch over the screws im sure water could drip back on them a bit, though I can't seen it causing too much a problem. somebbozos hang the shingles over 2 knuckles which causes them to droop into gutters, looks teriible, leaves little room for your hand to clean them, and on retrofits, causes careless instalers to break the shingles trying to get a screw drive underneath. Exaserbated with the older style hanger. Could the leaks you are seeing be caused by something else? Like 4' apart hangers sometimes cause the bAck of gutter to fishmouth, and form a pocket where shingles drain behind the guttdr? Some regional practices are to hang with no facia. This is a similar situation to 4' apatlrt. Obviously won't rot facia if one don't exist, but tails? Also sometimes roofsrsninstall new con before facia, then facia is installed and shingles no longer hang over. Problematic. Ive only Biden doing gutter a few years, but ive been roofing for 30, and been a roofing contractor for 14. Ive never den the problem you speak of with these hangers. In my opinion they are the cats aSs. I havnt ever seen a problem with the ones you are talking about either. With or without gromets. Spikes and ferrules, ive seen on any roof that has them, as I pretty well only do resedemtial reroofs, and only install gutters on homes in reroif. Never new construction. I can charge much higher prices, and gide the cost in the overall roof quote, and customers are happy as regardless my prices for roof+ gutter is still much lower than most others roof only, and everything gets done in one shot, at same time. It could be you are in a much damper climate than I am as well. Im about 30 miles west of Seattle, so pretty arid in these parts
Also your gonna throw the adjustments off the fron of machine not having it on a stand and just letting it hang out over 4 or 5 feet. Just saying. Cool video tho. Love gutters and seeing how diff people do them.
Do you need a specific license to install gutters like a contract license?
No that I know of
Depends on state, county or locale.
A business license is recommended it is required by most if not all states and in some areas you will be required to get a building permit for the work performed.
@@mikebeddingfield2144 yes absolutely
Before you rivet the downspout piece caulk it. You wont have all the mess or a leak
We are gutter aluminum coils supplier in China 3003&3105 aluminum alloy.
whats the difference between 5k and 6k ?
5k holds 1.2 gallon of water per ft and 6K holds 2 gallons of water per ft this is a 60 to 70% increase of water per ft. Really the style of roof (shingle/metal/cedar) and the Pitch of the roof (low slope vs steep pitch) and the length of the roof ( 1ft vs 60ft or more) and the roof material overhang (1/2" vs 3" plus) and the size of the fascia board (4" vs 12" plus) all determine if you need a 5" or 6" gutter. You can get all nerdy or just go bigger...to cover your ass.
Had a guy come out with a similar machine. Installed gutters galvanized, 6 inch, on standing seam metal roof, ranch style home, straight 55ft front and back. Simple?
The bottom of the gutters look like the ocean … wave after wave. 30 crumply waves on bottom of gutter out front, and 21 waves on back roof gutter bottom.
What the hell did he do? My wife complained to him, but I was at work. Dude is gone. Now what?
Not all the machines are capable of bending Galvanized metal...the machine in the video does. It is also possible that the machine they had was not tuned up or needed some work done to it. As with any workmanship issue when the company wont respond and has disappeared you are screwed. Its an unfortunate hard thing to hear but u can live with ugly gutters...which most likely work fine...or have them replaced by someone that has lots of online reviews... that are 4 star or more on google...this sucks...I hope that helps even though I am sure you didn't want that answer. Thanks for following and posting.
@@CertitudeHI Thank you for your response. We live in Del Rio, TX. Many fly by nighters here. He only got paid for half the job. I’ll have to add my own downspouts, but following your CZcams vids will assist me. Thanks again.
@@gottabighit1 ...that's called "oil canning"...the rollers in the machine were not in line.
Can you bend something as small as 1” by 1” square channel? I’d like to make channel to install permanent Christmas lights.
This machine does not ...but its a good idea!!!
There is only one way to put end caps on and that is end cap crimpers with a bead of caulk you spread with your 6” ferrule that you crushed the top flat using your hammer
..just squeeze the caulk into the crack with the caulk gun...no need to pick up a spike....not every crew uses spike and ferral..
🎉
Nice work, sealing should be done before you install the end cap. Otherwise, will fail in few months
Your almost correct / you want to first put the end cap on ( less mess ) / then seal / if you seal it correct it will last for years / I have been installing since 1977 / I know...
Instead of using outlets just cut your hole smaller and make tabs out of the extra metal and rivet the elbow to the tabs. Caulk the corners if you cut your hole too big
Watched 3 videos now not one of them bothered putting gutter under drip edge
hole saw bub lot faster
How much is the machine
about 13k
Whew wee! , I'll stay in retirement. ,Lol
@@CertitudeHI you’re probably not gonna see this but what package do you recommend getting with the 5 and 6 combo like guillotine and reel packages and stuff!
I always use "option stupid!"
What is 5 or 6 k? Do you mean inch?
Yes this machine makes 5" and 6" gutters
How much did the machine? Tools and Van cost total investment
If you get a used Promaster 2500 high top with the 169 wheel base with like 75k miles it would run you about 20k based on the year....The machine itself is about 14k then add the accessories, transfer bar and 2 coil holders which will be around 1k ...then you need to get a generator that at least is a 5000watt to run the 6k gutter coil (1k) through the machine and then get 2 coils one 5k and 6k which ($1400.00) and then get hangers end caps and all that stuff ($1k) ...and you will need an engine hoist ($400) or a fork lift to put the coils on and off the truck...a used fork lift can be about 4k to 8k based on the model you will only need a 3000lb rated fork lift...we have an propane one but now you can get full battery ones.
All in to be up and running I would have at least 35 to 40k for a gutter truck setup.
If you have the sales and sell jobs at a 50% profit margin...it should pay for itself if you produce $80,000 worth of gutter installs.
@@CertitudeHI 3- 5 jobs a week. I could crush this in under 6 months . thanks
@@koreyjf8095 Hell Yeah..GET IT
Well 3 month update?
@@koreyjf8095 been about six months? How goes it?
SPÒO!
Me spooed
Seems like screws are the easiest and fastest and most long lasting way i would imagine. Although im no professional what so ever.
Screws are fast however crimping the ends is a much nicer look
The crimp holds up perfectly fine. Especially after caulk.. getting them off in order to add on more gutter to an existing install is a battle sometimes. I use needle nose pliers and spin them like I'm opening a can of sardines in order to get them off. Lol
I'm watching this, cause where I stay a company named 'Leaf Filters', is offering $4000-$8000 a week for qualified gutter installers, but you have to already own your own gutter machine. I guess what they do is provide you the business.
So ye, that kind of perked my interest, but I'm sure there's more to it than that.
A bit late, but don't believe a word they say about pay. That's the pay (probably) for an entire crew and if you can do 2-3 jobs a day...also very unlikely. I did their leaf filter installs and was told 500 a day...yeah that's if you can somehow manage to do three jobs a day that included full cleaning, resealing joints and then install with a bunch of extra hangers installed as well. Each job ended up taking about 4-5 hours with all their extra bullshit, photos, paper work, and installing all the extra hangers equalling about one hanger per foot.
I'd like to hear your experience. There is something to be made but it's far less than what they hook you in with. There's also something to be said about a company that provides jobs...but they are very sketchy about pay per job...please let me know because I considered approaching them with "I have the extruder, but no crew. I will churn out the product for x dollars flat fee and move on but I will not install...just extrude and go to the next job." Something like 300-500 per job. Let me know if you worked for them.
@@mvansome Thank you for educating others with your sincerity and honesty.
Some make it sound easy. But not all gutter jobs are that easy. Ive been looking for those 40' ladder jobs that the gutter has ben stapled down. Not fun, not easy.