Ruida Controller Basics for your OMTech CO2 Laser Engraver - Laser Engraver Tips & Tricks - OMTech

Sdílet
Vložit
  • čas přidán 8. 07. 2024
  • Are you a new OMTech user looking to get started with your laser engraving journey? An existing user seeking extra guidance? Or are you still on the fence of acquiring one of our machines? This video and the rest of our OMTech video playlist will assist with frequently asked questions, provide additional guidance and advice, and motivate you with creative project ideas.
    This video will cover the 101 basics for your OMTech CO2 laser engraver's Ruida controller.
    Jump to your favorite part:
    00:00 Ruida Controller Basics for your OMTech CO2 Laser Engraver
    00:38 Directional Pad and Menu Button
    1:07 Origin
    1:27 Frame
    1:38 Max Power, Min Power, Speed and Pulse
    2:00 Using LightBurn
    2:35 Using Ruida Controller
    3:40 Load Material and Set Local Distance
    Website: omtechlaser.com/
    Check out a machine like Max's here: omtechlaser.com/collections/m...
    Check out Max's work here: / laserbeastlab
    Our Instagram: / omtechlaser
  • Věda a technologie

Komentáře • 24

  • @MikesLife87
    @MikesLife87 Před 3 měsíci

    Great video. I’m still learning. I’ll need to check out more. Thanks

  • @craighatch3221
    @craighatch3221 Před 2 lety

    Thanks, this was very helpful. 👍

  • @gretchenbernal1270
    @gretchenbernal1270 Před 2 měsíci

    I was looking at your video
    , and I have a question how can I change the work area size on the control panel

  • @antoniolamarca6094
    @antoniolamarca6094 Před 10 měsíci

    thanks for your videos! I noticed that when I repeatedly cut the same design, the cut tends to gradually move a few millimeters down the Y axis and therefore the cut does not always reposition itself in the same point. What could be the problem? Thank you for your answer!

  • @josharmour1549
    @josharmour1549 Před rokem

    How much different is this ruida controller vs the other Ryxon controller that comes in the 80w manual focus machine?

  • @ginnyreicker1154
    @ginnyreicker1154 Před 2 lety

    Video straight on.

  • @Vickers010782
    @Vickers010782 Před rokem

    Hello, when i connect steering panel to the mainboard and connect 24VDC without Motors or enything else can i check the menu and other functions on the display? I bought panel and mainboard and when i connect to 24VDC only reset switch is working, i cant enter to the menu. Is this correct? Cheers.

  • @RCjunkie
    @RCjunkie Před rokem +1

    Can you do a vid about setting up a new machine, I reworking a Golden Laser with a Ruida 6445G, I can not fine the place were to set the work table size 1300x700, laser hook up

  • @angeladelreal9046
    @angeladelreal9046 Před 11 měsíci +1

    how do I reset my ruida controller password my y axis is reversed and I need to reset

  • @jptram0005
    @jptram0005 Před 2 lety

    merci super tuto comment inverser l origin screen ?

  • @fdennisk
    @fdennisk Před 2 lety

    I just purchased an OMTech and I am awaiting the delivery. I have another laser (a diode) that runs directly from Lightburn. Hit “play” and it runs the laser. Does the play button now send the file to the Rudia controller, and now I run it from the Rudia? Or, am I saving the Lightburn file as a different file type and exporting it to the Rudia controller? Similar to a traditional G-Code CNC file?

  • @cory8619
    @cory8619 Před 11 měsíci +1

    I have that same controller. Am unable to use machine due to "Air Pressure Error" Message that shows up on the Ruida display when I try to run a program.

    • @daniebrand8644
      @daniebrand8644 Před 6 měsíci

      Hi, I am Daniel.
      I had pretty much the same problem. So I followed the airline from the compressor all the way to the cutting head, and find a 360° bend in the pipe, which prevent the air to flow through.

  • @freebird1963
    @freebird1963 Před 11 měsíci

    Pretty thin on explanations in the video. So you show the min/max buttons but can you change/set them with it ? Once you redo the origin to a new spot from the home spot does it still go home or will it go to the new origin ? So many things skipped over.

  • @rusticagenerica
    @rusticagenerica Před 10 měsíci

    Can a Ruida controller be used for a pen plotter?

  • @manfredkeinschmidt120

    Question, when I import the file, can I deaktivate Layers. Reson it was nocht cutted out so I need one the cutting layer not the other ones..can you help?

  • @thashkeermawjood5725
    @thashkeermawjood5725 Před 2 měsíci

    What is the model number of this Ruida controller? Pls as I also have the same controller but I don’t know the model ,

    • @omtechlaser
      @omtechlaser  Před 26 dny

      I believe the model number in this video is the RDC6442S

  • @saraeissa4954
    @saraeissa4954 Před 4 měsíci

    Everything works for my machine except the actual laser isn’t turned on

    • @omtechlaser
      @omtechlaser  Před 3 měsíci

      Hey there if you still need assistance we recommend reaching out to our tech support team. They are very knowledgeable and can assist with any issues you may be experiencing with your laser. Please get in touch with us at techsupport@omtechlaser.com we're also available by phone at (949)438-4949 during business hours of 8:00AM - 5:00PM PST Monday-Friday. We look forward to assisting you!

  • @robertpfohler363
    @robertpfohler363 Před rokem

    Your camera is all over the place, it’s hard to watch

  • @Crazybraincreative
    @Crazybraincreative Před rokem

    This is a helpful video, but the camera moves way too much.