Video

Despite the hype, I found the OMTech Polar Laser Machine to be a disappointment. I struggled with its setup, and the performance didn’t live up to the expectations set by the marketing. I was hoping for a more seamless and effective experience, especially considering the price.

When I bought my omtech co2 I got problem setting it up and seems it is default problem with the laser itself but their customer service sucks. I just throw it away since they do not want to give a refund or replacement of my laser.

Is that a Thunder Laser?

Wooooopaaaa !!!

What is the operating voltage of the Water Sensor

honestly, the easiest to follow focusing video I have seen and the fastest. Just enough information to do it correctly and not enough to confuse the viewer.

I hope when you used that sandpaper on the stainless steel you were wet sanding with 1200, or 2000 grit paper. If you had scratches left on the piece then I'd say it was likely you had to coarse a grit.

Great video. I'm waiting on some mirrored acrylic to arrive. I did some tests on two tone (multi layered) acrylic samples. Unfortunately, you could see lines in the filled areas. Is it likely that I'm running it too slow/strong? Any suggestions would be very welcome

Is the laser also available in Europe (Germany)?

Can i cutting mirror acyloc with diode laser?

Any chance to review in Italy

What are the dimensions it can cut?

Running on 1.5mm basswood. None of the images are burning in.

where is Brilliance Laser Ink

What's the Pen function? And how do you determine the Y Axis?

so dumb question. can i use dollar tree faux leather?

👋

What is the camera attachment?

I just bought this machine and when I went to do the Pulse test, the laser did not work at all. We followed the setup instructions but the laser won’t pulse at all. Are we missing something?

My Omtech 70w will do nothing under 14% power. How do we do 10% power exactly?

Where do you buy this part?

Well done guys hopefully to review soon

We own an Omtech (AF2028 60watt) machine and use it for our business. Having worked with lasers for the past decade using high-end lasers (universal, epilog, trotec) along with cheaper Chinese models similar to Omtech, I can say customer service is a must. That said, every time I have had to reach out to Omtech support, I have had nothing but issues. The tech support has never had the information I needed, and it's super frustrating. How do you not have the specs on how much weight you can set inside your machine? All-in-all, the machine is a great starter machine, but if you are trying to buy one for a long-term business, I would recommend a company with better support. Although this is a negative overall review, no one ever wants to mention this and only talks about the positives. Transparency should be a must when customers are trying to buy and spend thousands of dollars regardless.

Ordered a 50W Fiber during the Memorial Day sale and is gonna be here any day now: Super excited to up my laser game!

Can we have more videos like this

What kind of lights did you add to your laser?

los videos no los tienen en Español ?

What is the model number of this Ruida controller? Pls as I also have the same controller but I don’t know the model ,

You said once finished with the rotary you have to reset your machine how exactly do you do this please

Sorry spelling WHICH LASER MACHINE

Which kaser bachine

I was looking at your video , and I have a question how can I change the work area size on the control panel

is this test card also good for acrylic?

Bit late but the magic eraser has polishing compounds in it rather than just the texture of the sponge.

The banding may be caused by too high a DPI. CO2 doesn't have a dot size that small unless you have a HR lens in it. 254 dpi is about max for CO2

Price

jesus. stop with all the in and out camera movement. if this is meant to be a tutorial, it needs to be able to be watched without all the random camera movements

what did you use to mask the wood? painters tape? masking tape? paper transfer tape?

Can't wait to get mine!!❤

Great job and useful way to use your laser. I have the OMTech Polar and am very pleased with it. Over the years I have had many lasers, expensive ones and now to this one, which is the least expensive and does everything the more expensive ones did. I have added an external control panel which makes it much easier to run.

I'm kind of wondering why OMTech bother doing any videos at all the couple I've seen have been pretty much useless for such a great product you need to do better. 1. You removed all form of bed from the device adjustable shelf now what's it sitting on? because it's still able to up and down. There's also no mention of how you aligned it to the X top rail. 2. you changed from normal to rotary does changing it back ruin the existing settings I've seen other videos show you how to backup existing setting so you don't ruin your old settings. 3. You've located the drive rollers on the part of the tumbler that has a thread on it I just cant imagine why you'd do that risking it walking up and down the thread. 4. You've centred the device but how there are no markings on the rotary device. 5. No mention at all of how your going to stop the project from walking up the drive train nothing stopping it from doing this. 6. If I was OMTech I'd have suggested settings for all my models for this process or should we just destroy 6 tumblers working it out. 7. No mention of Lightburn suggested settings for line interval distance either. As a business owner and CEO if your going to do something do it properly this is pretty useless.

sculpfun bu ayarlari daha yüksek cözünürlükte ve farkli dillerde altyyazi secenegi anlatiyor. sizde ise sadece 1 dil ve görüntü kalitesi düsük.

If the left and right sides are engraved, they are blacker, how do you adjust them so that the black color is even? thanks

A step by step settings in lightburn would be great. I know alot of people have bought Omtech lasers lately and like me need a little extra help. I have the k40+ and regular roller and it throws the cup off every time. I want to upgrade to the Chuck rotary but apparently it doesn't fit on mine.

How long did it take to engrave that patch? And how long will it take to engrave 20 patches that size? I’m new to my laser and for my 2x2 inch patch it takes about 10 mins. 😩.

Great video. I’m still learning. I’ll need to check out more. Thanks

Sparks on stainless steel = rust. Too much power.

Have tried the masking tape and not sure why but that doesn't work well with my S1 40W xtool. Have tried multiple times and I get some bleeding underneath it. Probably I am doing something wrong. What type of paper are you using?

wäre schön wenn es diese Vidios auch auf Deutsch gäbe

Where do I get the circle pattern file to print