Legend! That controller looks sick! Love the name btw... And don't worry, I'll make sure the LED support will be in the official float package before the first units ship
Guys, Thankyou for this video! As I'm a complete noob on VESC, I would like to know what other things I need to buy in addition of this pack (are a new motor and battery needed or could iusrthe stock). For now, I just have a stock XR but definitely want to move to VESC! Thank you 🙏
The XR motor has a very bulky connector. If you are really keen, you can solder a funwheel connector on the motor and use the same motor, you can also do the same foe the battery but requires soldering and skill
@@FungineersI've a few questions. I have 2 xr boards I want to vesc 1. Just to confirm I CAN use xr motor and stock battery if I solder new connectors ? I have solder skills . 2. Are the Thor 300 motor controller pre configured or do I need to fully configure them ? I assume they work with the vesc app ? 3. What is the maximum output and what us the maximum charge amperage that the Thor 300 and one of your bms combo can handle ( I field charge with a 5 amo charger) 4. Can Thor 300 / funwhel bms work with a cbxr battery ? ( similar to last question ) 5. Will this work with stock components from xr ( footpad, box motor etc. ) with the ports adapted ? I'm looking to vesc one xr and then evaluate my approach on the 2nd, at present this fully made box is sold out on your site, so I'm looking to use as much of my onewheel stock components as I can, looking to order all parts to toss in Said box, what parts do I need ? What are the shipping times to canada? Thanks for everything you do, future motion is dead to me and I'm looking for a better company to support. Thanks :) Fomf :)
A standard XR motor has a big connector unfortunately that will not fix on our box. You can convert it with a Fungineers connector and plug it in the box but the conversion requires soldering.
Question: are there patent issues, or did the patents expire, are they weak patents your going to challenge if they come after yah? Red and blue light may get the pigs sniffing for your ID, those pigs they like ID's more than crack. I think they actually get paid by the ID. "How do you know you don't have any warrants"- asked the pig, because I don't break the law, I responded. "Refusing to ID is breaking the law" said the pig, in a non stop and identify state, as I was walking down the side walk.
OMG. This is some hot VESC porn right here. Mmmm... Yeah, daddy, show me that machined aluminum controller box again. Yeah? 300 amps, you say? RGB lights? Yeah? Keep going... Put my order in two weeks ago. Can't wait to get up ons! Questions: Will the complete battery box come with a charger? When will you have the front footpads for sale, also any info on them (concavity, etc.)?
😂 The battery box will have an option to add a 5A charger to it for < $80. We will update onnthe charger production as well. Front footpads will be for sale and they will be concave, but more like XR concave not like GT concave. We don't like the GT platform at all sorry 😅
It is hard to believe that this will survive 300A on 20s -> just to prespective lil focer/tronic250r with fets in To-247 package handles less. TOLL package has its limitations.
Legend! That controller looks sick! Love the name btw... And don't worry, I'll make sure the LED support will be in the official float package before the first units ship
Dado is the real MVP👆
You got two weeks™ to get it done 😁
Nerrrd alertttt. Should we offer Free shipping if you get thru the entire 20 mins 😂
🤣🤣
pwetty pwease
#lastsecondclub
how long till they are back in stock
@@dylanmitchell2803 two more weeks just cuz u asked
Wow, this projects has grown so far in the last 3 years. Amazing work.
Beautiful LED solution and cooling innovation @lia
Mind is blown from these products you've designed!I love the Thor 300 especially as another option to the awkward but awesome focer 3.1.
Dude, thanks for the update! I can't wait
Amazing work
This is fantastic! 🔨⚡
Very excited to finally go VESC! I ordered the controller box, battery box and the Superflux 😊 I may get your footpad too once it's available
God this box is incredible
I love that controller and box 😍 full power fungineers
I love what you guys are doing and advancing the sport/product. Can we get some love for the pint form factor? 🙏🙏🙏
I personally love the pint and I promise one day we will make Pint compatible things 🙏
That would be awesome, who doesn't have an old pint laying around that could use some love@@Fungineers
This is very exciting!
Having never seen this channel before I was reading it as fungi-neers and was hoping this was a mushroom grow controller lol.
Lol
mega video, thanks again
You rock Nelson
Looks sooo dope. I am curious about remote tilt. Is there support for something like the BKB voyager receiver?
Yes on the comm port (the other 6 pin port) there is an extra Tx and Rx that can connect to any Bluetooth device like the bkb remote.
LETS GO!!!
So awesome! Where do i get the Footpad with the status LED?
I saving my money man 😎😎😎🤘🤘🤘
Are we going to be able to order the male version of the new motor connector soon?
I hope so, I sent them an email about it since I would like to do a plug swap on my cc.
Yea for sure!
Guys, Thankyou for this video! As I'm a complete noob on VESC, I would like to know what other things I need to buy in addition of this pack (are a new motor and battery needed or could iusrthe stock). For now, I just have a stock XR but definitely want to move to VESC! Thank you 🙏
The XR motor has a very bulky connector. If you are really keen, you can solder a funwheel connector on the motor and use the same motor, you can also do the same foe the battery but requires soldering and skill
@@FungineersI've a few questions. I have 2 xr boards I want to vesc
1. Just to confirm I CAN use xr motor and stock battery if I solder new connectors ? I have solder skills .
2. Are the Thor 300 motor controller pre configured or do I need to fully configure them ? I assume they work with the vesc app ?
3. What is the maximum output and what us the maximum charge amperage that the Thor 300 and one of your bms combo can handle ( I field charge with a 5 amo charger)
4. Can Thor 300 / funwhel bms work with a cbxr battery ? ( similar to last question )
5. Will this work with stock components from xr ( footpad, box motor etc. ) with the ports adapted ?
I'm looking to vesc one xr and then evaluate my approach on the 2nd, at present this fully made box is sold out on your site, so I'm looking to use as much of my onewheel stock components as I can, looking to order all parts to toss in Said box, what parts do I need ? What are the shipping times to canada?
Thanks for everything you do, future motion is dead to me and I'm looking for a better company to support.
Thanks :) Fomf :)
go Leah 😁😁
can you confirm the the 2s2p booster pack brackets come with the controller box or is that something that has to be obtained elsewhere?
Is there thermal paste betwene the vesc and the box?
Will you release more of them?
Could one use a CBXR with that controller/build?
When will the Thor 300 and complete battery come back in stock? 😢😢 I'll buy it right now
I just preordered. What cable would I need to connect to standard XR motor?
A standard XR motor has a big connector unfortunately that will not fix on our box. You can convert it with a Fungineers connector and plug it in the box but the conversion requires soldering.
Sounds pretty easy.
Put some thermal paste between the 2 layers of aluminum.
Absolutelyyyyy
Can you use any XR rails with this kit?
Yes, it's made for xr rails. Check on the website
Hola, puedo ponerlo en trotter t3 de magwhell
Se envía a Spain?
sí, señor
Question: are there patent issues, or did the patents expire, are they weak patents your going to challenge if they come after yah?
Red and blue light may get the pigs sniffing for your ID, those pigs they like ID's more than crack. I think they actually get paid by the ID. "How do you know you don't have any warrants"- asked the pig, because I don't break the law, I responded. "Refusing to ID is breaking the law" said the pig, in a non stop and identify state, as I was walking down the side walk.
When is the footpad dropping????
In Decemeberrrr
Thi isn’t the fungineers!
OMG. This is some hot VESC porn right here. Mmmm... Yeah, daddy, show me that machined aluminum controller box again. Yeah? 300 amps, you say? RGB lights? Yeah? Keep going... Put my order in two weeks ago. Can't wait to get up ons! Questions: Will the complete battery box come with a charger? When will you have the front footpads for sale, also any info on them (concavity, etc.)?
😂
The battery box will have an option to add a 5A charger to it for < $80. We will update onnthe charger production as well. Front footpads will be for sale and they will be concave, but more like XR concave not like GT concave. We don't like the GT platform at all sorry 😅
It is hard to believe that this will survive 300A on 20s -> just to prespective lil focer/tronic250r with fets in To-247 package handles less. TOLL package has its limitations.