Overview- Mariner 40M 6E9 / Yamaha 40 hp - Japanese Short Shaft Outboard Motor
Vložit
- čas přidán 8. 10. 2023
- In this video we take a short look at the Mariner 40M outboard and some of the parts fitted to it.
This engine is more or less the same as the Yamaha 40 2 stroke
This is the Japanese model - Auta a dopravní prostředky
Do you know how could I replace oil seals from lower unit? I have same outboards but leaking oil from gear case
Depends where it’s leaking from ?
Prop shaft seal, drive shaft or gear selector
@@MarineEngineServicing I do believe it’s from prop shaft seal and prop shaft seals as it’s leaking only where there exhaust comes out
I also forgot to mention that my engine is the 40ml 6e9
You will have to remove the bearing carrier which is held on with 2 bolts, this sits just behind the prop.
Assuming the fluid leaking is gear box oil.
Once off you can remove and replace the 2 lip seals around the prop shaft. Replace the o ring on the carrier at the same time.
You will need a set of pullers to remove the carrier from the gearbox.
This can be done without removing the lower unit from the engine
@@MarineEngineServicing thanks a lot for your help Sir, really appreciate it!! I also did a test to maybe understand better my issue. So I drained the gear box and cleaned the inside of exhaust where it was building up oil. Once I did cleaned it and put back oil to the gear box and it didn’t leak until I turned the propeller shaft. I don’t really understand much about outboards and lower ends and maybe you can help me identify where the oil is leaking from.
Cheers chief 🙏🏽💪🏽
Здравствуйте могли бы вы описывать работу по мотору на русском в субтитрах?
It should have some auto generated in CZcams ?