This Router Bit is Insane!
Vložit
- čas přidán 9. 09. 2023
- Trying out and testing the scariest router bit I've ever seen! Brought to us by Squarespace. For 10% off your first purchase, go to: squarespace.com/makesomething
Join the Make Something Patreon to get weekly behind the scenes access and coupons: / picciuto
Router Bit (Right Handed): I have no affiliation with this bit or the seller. Purchase at your own risk.
bit.ly/4657S8Y
Tilings App: bit.ly/48ajiKw
★ TOOLS / SUPPLIES USED IN THIS PROJECT★ (Affiliate Links)
Spray Adhesive: amzn.to/3Zel21i
Bandsaw: amzn.to/2WwuhgH
Disc Sander: amzn.to/3E2lMvv
Router: amzn.to/3zWG3R1
Router Lift: amzn.to/3zXDU7p
Double Sided Tape: amzn.to/3r6qqXy
Yellow Paddles: amzn.to/3su2mfj
Green Tape: amzn.to/3Exkeed
Planer: amzn.to/2swddVQ
Jointer: amzn.to/2IJyRRh
Drill Press: amzn.to/3IRUMll
Festool Router: amzn.to/3AEQ5HS
Table Saw: amzn.to/2E89suw
Oil Finish: bit.ly/3AIDUbb
#woodworking - Jak na to + styl
If you're not terrified the entire time you're routing or using a table saw, you're not paying enough attention
It shall be known as 'Excalibit' and great will be its deeds. I'm imagining that you're walking through the hardware store and there, suddenly, in front of you is a large boulder with this bit is embedded in it. You hear an ethereal voice saying, 'Whosoever shall pull this bit from the stone shall be King'. And the rest is history.
Comparing a router bit to a banana is the scary part!! 😅
I mean, in a smack down between that bit and the banana?! No contest. It’ll be a blood bath…or maybe a mush bath.
Love the Norm Abram love this week. New Yankee Workshop is the reason I have the audacity to think of myself as a woodworker.
Also the reason I tap my glasses and say “always wear these [tap tap] safety glasses,” whenever I’m about to do something dangerous. 😅
Dave I worked in a Manufacturing woodshop that had a shaper router table, that is what that helix bit would be used on, a shaper motor is a bit heavier to handle a bit that is about 3.5 to 4.5" tall and yes it scared the SH*T out of me when I had to use it(it once grabbed the peice and throw it across the room I went to the staff locker room to change my shorts)
Man... Even as a child I was fascinated by Norm Abram when the NYW was broadcast over here late at night. Same calm energy as Bob Ross, but with more dangerous equipment.
It's a planer blade attached on one side. Definitely deserving of one of those terrifying heavy machinery warning stickers that shows a stick figure with a bloody stump for a hand and blood and fingers flying away from it.
Also, if you haven't already thought up your next old/cheap to fine woodworking idea, I think a good one would be to turn one of those cheap plastic Eveready/Rayovac flashlights that never work consistently into a superfine wood flashlight. It's a small thing, but could turn out pretty cool, especially if you make it a part of a set of things like a fine furniture road emergency kit.
Dave, that's wild! Thanks for the heads up on the bit, it looks amazing!
You crack me up every time I watch your videos, great editing, humour and informative content…love it
Always love your stuff, David.
Thats some great dust collection at your router table 😂
That is one intimidating bit! I can see why you have been trepidatious to use it. And yes… I like that you added that you remained focused, reassessed and continued every once in awhile. Sage advice!
And that tiling app, great find! Really useful! Thank you
I have a spiral bit on my box planer and it's SOOOO!!!! much better than straight knives. Always enjoy your videos. I always learn a lot. Thank you. The tile pattern will make a great side grain cutting board.
Hahaha! Great video! I especially like seeing Norm in the back, getting sawdust flung at him.
A healthy respect for spinning with sharp blades is key for any woodworker who wants to keep all their digits. Thanks for reviewing that beast of a router blade. I think the table top looks good, but I’ve got to admit that I’m a sucker for the artsy bowl set.
I’ve had my eye on one of these bits for a while. Thanks for the video!
You're a much braver man than I am, David.
I love the projects you demonstrated, but I would probably quit woodworking before handling those spinning blades of death. The jet engine sound alone is terrifying. 😂
Looks like a jointer replacement shaft. Lol. Them bowls are cool
Smart man to be afraid of that thing! It's basically a flesh eraser if used haphazardly.
Flesh Eraser would be a great name for a grindcore band
Those bowls are so clean! Those would make great gifts.
Respecting tools is super important. Not being cautious or a bit scared (😂BIT scared...) is when you get hurt. Power tools are no joke, specially these days. Safety 3rd!
Love your style Dave! You might not like teaching in your videos but I still learn a lot!
And that's a friggin sweet Norm portrait 🤘🏼
"If you don't have a _______ use a _______." Is my favorite one liner.
Cool bit. Scary af though.
Even cooler project you made with it
Damn! I can relate to your fear. That looks truly terrifying, but incredible useful when dealing with thick material. Thanks for the video!
A bit of great information on a great bit I wish I knew about this bit a bit earlier.😊
This should be added to the Picciuto line of badass builds. The design and end product looks amazing.
That thing's a beast and less expensive than I had expected. Including the extra cutters is a nice touch.
We use tungsten carbude inserts that look similar. Depending on how those are held in and indexed into the tool you could probably find different inserts to utilize for different types of grooves and designs for edge detail. Just a thought.
I love seeing Norm. I'd be more worried about someone who isn't scared of that bit.
"Say what you will": I think that a healthy respect for unfamiliar tools is the mark of a careful craftsman!!
Very cool ideas love both ideas thanks for sharing
Just fantastic filmmaking again. That slow pan from the TV blade guard scroll to the router bit had me smiling.
whole new meaning to "committed to the bit"
"I don't know what I'm doin'" , my kinda woodworkin' !
Saw one of these bit in an arsenal for one of CNC mills during the engineering training programme. I knew how it works, now I have seen it in action.
The “cutters” are carbide inserts…or cutters, kinda interchangeable…but basically the same as I use on CNCs for metalwork at the shop I work at. I’ve never used them on wood though. I would think they’d last a really long time.
Love your videos. And thanks for always putting out great ones!
This guy is fantastic!
Totally agree with your thoughts on the bit - I've always said my router is the scariest thing in my shop :)
Cool video. Awesome builds, gorgeous. Mahalo for sharing! : )
omg… I want… THAT BIT! I FLIPPIN’ LOVE IT!
Absolutely terrifyingly awesome
Looks like the fancy cutter for a planer or jointer
I have a similar size Infinity bit and it scares the crap out of me also. I keep the fence as close to the bit as I can depending on the piece. I think it makes it safer and definitely helps with the dust collection.
That bit is a beast!!! I think I will pass on it. I think I'm too terrified of it. LOL. I love my router. One of my favorite tools. But man... routers are also the scariest of tools to me. I still enjoyed watching it in action.
Great content. I love the little bowls and the table top.
I'd be terrified of that bit too, so you're not alone.
0:52 *in baseball announcer voice*
"Oooooh, that one was just outside..."
😂
Thank you!
I use this bit in my Bosch 1617 to joint boards (among other things) on my router table. It's works so well that I sold my jointer. The 60mm cutting height is great for 8/4 stock. I agree this puppy is scary at 18k rpm.
They are carbide insets. We use them a lot in machining. They are a great option for planers too.
He showed this and talked about it just after the 4:00 minute mark if anyone isn't familiar.
I think it’s wise to be treat the router with a ton of respect like you do. I’ve had a few near-disasters with them (especially the little ones).
That thing is terrifying just to look at from home, let alone in person with my hands anywhere near it. You're a brave man!
Looks like a good tool for thicker stock. I would use it
That banana tho!🤣
At least you didn't forget the most important rule, your safety glasses.
I am with you on that one David & would never use a router bit like that, ever/never! 👍👍
I have a spiral cutterhead from that company in my Dewalt planer. It's awesome and about 1/2 the price of the Byrd head.
Saw the thumbnail and was terrified!
I totally thought for a sec you chucked that honk'n bit into your handheld router to hollow out the bowl. I was like, "but he just said he wouldn't... what is he doing?!".
That bit looks intense for sure.
I just KNEW that the thumbnail was a photoshopped jointer head. 1 minute in and I had to stop it and go get the hubby to see the beast! Remember, bravery is doing a thing despite the fear. The rewards were great.
The bowls are amazing! Love your work.
Saw a bit like that one time at a briss. Moyle said it was his favorite, called it the pickle-duster. But what he had, that Dave didn't, is a fence with great extraction. Can you imagine what would be flying around had he not?
dude love trhis content but I gotta be real Norm and the New Yankee Workshop is absolutely legendary. I remember watching it as a kid and it was one of the reasons I got into wood working. Love the tribute area in the shop! Keep up the amazing content
No reason to not continue watching it. Russell Morash (the producer of NYW, and owner of the actual shop) has been uploading the videos to a channel on CZcams. One of my favorite things is when he uploads an episode, and then follows it up with a video from this year of him showing off the thing that Norm made and how well it has held up over the past 30 years. He recently did this with the gardeners workbench Norm made.
The channel is called simply "The New Yankee Workshop".
When is the bowl plan going to be available on your website? What a great design.
Your video is very entertaining. You definitely have guts to put that bit in a router, even an inverted one. Smart to check it often to make sure it remains tight. If you can ever upgrade to a shaper that has router bit collets it’s much safer.
One observation on your tabletop. It looked like you were using pine and walnut together. The difference in the density of the woods will probably cause a problem as the wood expands and contracts. In the future try using ash with the walnut. It gives similar tones as pine and has about the same density as walnut. I’ve done several projects over the years using these woods together and they still look great. Don’t mean to be critical just a helpful hint.😁
Like the video & the scary bit! Would you dust collection not be better placed to the right of the bit, where the majority of the debris flies off?
I'm a full time fine furniture builder. The reason you are scared of this router bit is because you don't have the start pin on your table setup. You should never expect to safely shove an unsupported piece of wood into a spinning bit. Fence for straight cuts, start pin for free form. Hope this helps.
I needed to get rid of a cat-door cut in my 95 year old kitchen door. I used my CNC to cut two templates and I bought a router bit with a 3 inch cutting face. You're right, the bits are intimidating, so I had my general contractor do the work and the patch is flawless.
I'm gonna say what I want! I totally agree, that's the finger deleter 5000 😂
Great video. Use the different bearings by flipping your piece over periodically so that you are always doing a “downhill” cut with the grain & there will be less grabbing/fear. That is the whole point of this bit.
That thing is definitely...Routerbit of the Month™️
Fear just means you respect it. Gotta respect your tools to stay safe in the shop!
I am definitely going to grab one of these bits! I love the fact you can turn the cutters to basically get 4 fresh flush trim bits out of it, and it comes with extra ones as well. However, I think their packages are kind of silly, since the bit takes 12 cutters, and you can pick a package with either 10 or 24 extras. Umm, maybe 12 or 24 extras? Just sayin!
that bit is so scary that if I were using it, I would have worn an apron made out of steel in case one of those carbide cutters flew off and, well, hit me in an area that I would not want to be hit in. Thanks for posting this.
Agreed! I'd also probably pull out the torque rench when I change the inserts.
The Ron Jeremy of router bits.
Your videos never fail. Love it man. I bet the ones from China are even scarier lol
Dude, this is exactly what I need for a big-assed table I'm building soon--the base will have large, thick curved legs, and this cutter just solved my problem--how to template route them. Thanks!
Where is this bit available? Or name of it
I'm 45 seconds in, just gotta ask. Is that your Bob Barker mic? Always great seeing your videos! Also, I really dig that you make your own music. 👍
we have a lot of them in the industry, even some big ones... scary as f
at my last work place, i preferred the old style router they had, it was build big and heavy, in an table, with an over head running wheel and protection, it made it quite a lot more comfortable to work on
I want to konw where you got the Norm holding the saw art. That is great. Thank you for your videos!
Ahh I found it, Jim Ether painted in commission from Dave!
I'm reading the other comments and a lot of people seem to be intimidated by this bit. I have used a good few routers, as well as planer/jointers and thicknessers at home and at my Menz Shed. I currently have a Triton TRA001B in my router cabinet, and Bosch 1600E handheld, and love them both. But my favourite tool is a HAFCO 10" thicknesser/planer with spiral head. It is so much quieter than tools with HSS blades. It makes nicer chips that don't clog the extractor, but best of all, the finish is amazing. Noticeably better than the 16" thicknesser we have at my Menz Shed, and that also has a spiral head. It can be annoying swapping between thicknesser and jointer functions, which takes about ten minutes, but that can be reduced with planning. Spiral heads with carbide inserts is definitely the way to go IME, and judging by what I just paid for this bit, they are getting more affordable.
I agree completely. My small garage shop doesn’t have room for a big jointer, so all I’ve got is a nice router table. Thinking of picking up one of these bits to make quick work of edge jointing boards on my router table. Would probably be a lot less sketchy with fences, featherboards, and dust collection.
I thought the table saw was scary until my router table ripped a piece out of my hands and threw it into the garage door.
That thing looks frightening, wouldn’t want to strip any threads holding those cutters.
Glad you came out unscathed 😃
What was the app or software that you used for creating the pattern at the beginning of the video?
Carbide inserts.
I use that one and a 4" x 4" in my shaper.
How would you say this bit compares to a standard flush trim bit, say a compression bit. I have been looking at picking up a high quality bit for guitars and this looks like it may do well for maple neck headstocks which can get tricky when the grain direction changes.
Stunning work, Dave! Really beautiful pieces!!! 😃
But yeah, that router bit scared the heck out of me as well! 😬
Anyway, stay safe there with your family! 🖖😊
Looks like it might be great for those who use their routers as edge jointers.
That bit looks absolutely terrifying - I'm sure it produces a great result but damn.
I don't blame you for being terrified of that thing. It's like a reverse lathe.
Spins down and it sounds like an air raid siren!
The straight sided pieces could be a perfect candidate to template on table saw and an L fence.
"Say what you want!"
I'd like to tell you I'm about 98% sure I was behind you in traffic the other day while listening to the Making It podcast and I really debated pulling up next to you woth the volume cranked way up 😂
😮
That is impressive! I suppose looking at the size of it,its 1/2 inch shank only?
I am actually buying one, and probably it in my shaper once I get my Hammer C3 31 Comfort cleaned up.
Nice!
Exercise bike today haha
Watching that bit spin reminded me of the Tasmanian Devil cartoon. Probably with the same results if it ever got loose.
You cannot convince me that this is safe, this thing looks mad
I have a Jessem router lift. I don't think I have that much range to get a big that long under the table. It's been so long since I installed it, do I need to adjust my router in the lift?Maybe I have it sitting too high?
I've had 2" flush cut bits drop out of routers before and I understand!
I can't wait to hit the play button. This will be interesting to see. Typical HSS bits are not meant to go the speeds routers go.
Inserts* (what Machinist call them)
Also to add, as long as you torqued those screws down, you will be fine. Find out what they suggeste and get a handheld, breakaway screwdriver. (Whatever you want to call it.) Don't over torque or those screws will break, then flying inserts are scary.
I'm wondering if it might be better to turn the part upside down and use the bottom bearing when cutting end grain at an angle, so the bit is lifting the grain. I have and love a Whiteside spiral bit with top and bottom bearing, but this bit looks to good to ignore, so I have just ordered one. I can't remember what I paid for the Whiteside bit, but I am sure it was more than I just paid for this one.