Changing barrels w/ Short Action Customs SAC modular action wrench
Vložit
- čas přidán 19. 11. 2023
- Find them here shortactioncustoms.com/produc...
Go to my website for more information www.fclassjohn.com
Join Patreon / fclassjohn for full length videos, live chats and more.
Help support my channel by shopping Amazon amzn.to/35YA4h8
DISCLAIMER: This and all videos on my channel are not meant or intended to be viewed by anyone under the age of 18. This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including CZcams) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above. #fclassjohn #reloading - Sport
I met Russel at the hotel in Uvalde Friday evening and Clay at the match Saturday. These two guys are great ambassadors of the shooting sports and go a long way to making Cortina Precision a recognized organization
"It's a slightly undersized shaft so it will fit in most holes"
Sorry I laughed about this statement
Your new marketing series is really well done.
Thank you.
I'm a machinist by trade and I believe it would be much safer and kinder to the metals involved if you clamped your barrel much closer to the action. There is an amount of twist in the metals when things are tightened together, so the closer the items are together , the truer the torque. Also would recommend a nickel never seize. It's friendlier to the dissimilar metals .
Thank you for the feedback, appreciate it.
Wow, I just reread my comment and I'm sure it sounded to you kinda insulting. I'm sure you have torqued your barrels like that hundreds of times.,.... All I was trying to say is there may be a little better way. I reverently watch your videos and am in amazement of how you shoot, so I know you are going for perfection. And maybe an old machinist might have a tip that will help. Anyway, thanks for the response.
@@magic4221 no worries. I really did appreciate the comment and suggestions.
Congratulations on Nationals Sir!
Thank you.
Great Info , Thanks John 💯💥💥💥💥💥💥💥
Glad you liked it.
Thanks, John. It's an excellent video as always, question though. How do you make sure headspace is correct or all your barrels turned to the same specs?
At $50 per head, it's not saving you much. I'm more impressed with the vise. Much easier and faster than a two-bolt vise. But no more than I have to tighten a barrel down in a vise, mine works fine. If you buy at the latest and greatest, you can spend a small fortune.
Clamping your vice down so far out on the barrel and torqueing on it makes me cringe 😯😄 Nice set up though.
I noticed your using the same Tuner between barrels ... How repeatable are they when swapping like this?
In my experience they’re super repeatable. I’ve moved tuners around quite a bit over the years and no issues.
@@FClassJohn Thanks mate! Great to hear.
What torque wrench do you recommend? Thanks!
In general I think the Fix iT Sticks work great. I use the Borka www.borkatools.com but he's had supplier issues.
Bugger, no Barnard adapter
That action wrench wont take off any factory barrel like remington 700. John is always bringing good stuff to the channel but this wrench brakes easly and SAC wont warranty the product. They charge good money for a product that bakes and wont warranty buyer beware. Dont belive the hype