(583) KW1 Lishi Making a Key to a Master Lock Pro Series 6621 Padlock
Vložit
- čas přidán 20. 11. 2023
- Subscribe:tinyurl.com/8bftltda
Lishi Vise: amzn.to/44mPDvh
PayPal Donation Link: paypal.me/boredlockpicker
contact: theboredlockpicker@gmail.com
DISCLAIMER: This video and description contains Amazon Affiliate Links, which means that if you click on one of the product links, my channel will receive a small commission at no extra cost to you.
Thank You For Your Fan Funded Support!
#lishi #locksmith #locksport #keymaker - Jak na to + styl
Great demonstration. Thanks for this video, cheers
Thank you for the comment. Will be posting a Black Friday video for multipick. They’re running some
Sales. Nice picks too
Nicely explained my friend..🌴😎
Thanks man
Nice job… I assume you speed thru key cutting lol … if not you have a fast machine for sure !
Thanks for the video 👍🏻
Cheers 🍺🍺
Super blitz lol
I'm pretty comfortable lishi-ing residential locks. Today was my first day generating a key, I used a blue punch machine. Made about 12 keys but none of them worked.
Does your blue punch normally work?
My employer just gave it to me this week along with a scope for smartkey deadbolt lockouts. The blue punch has the gauge so I should verify the cuts are accurate.
You were using a Lishi or the scope?
Yes. Can you send me a pic of it? I can tell you. Theboredlockpicker@gmail.com
The punch machine has a gauge allowing you to read the key cuts. I read a key as 15221 but the 5 cut was always in the wrong place. Finally figured out it is 52211. I was reading the key's shoulder as a 1 cut. Still haven't generated a key from the lishi reading yet.
this was good. Any pros to getting the KW1 vs the one specifically for master locks?
You have to get the one that matches the keyway. This master lock had a Kwikset cylinder in it.
Always impressive work!
Question about your tension on these residential lock Lishi's? Light or firm?
I got some hands-on instruction from a guy that insisted on very firm tension. Doesn't work for me but he picks and reads locks faster than anybody I've seen.
You appear to be using a light tension? and seem just as successful.
Happy Thanksgiving to you and yours!
You really want to use the heaviest tension the lock will allow.
Will the KW1 lishi work on the pro series 6127? The lock is recessed a bit.
If it’s Kwikset keyway it will work
Been following and watching a lot of your videos the past years. Thanks for great content
I have a question regarding the HU87 Direct reader for Suzuki
Is it right understood that you read the even numbers on one side then flip the tool and read the odd numbers
Best regards from Denmark
Never used it but that’s how most of the direct readers work on double sided locks. Hon70 is the only one I’m aware of that reads both sides of the lock without flipping it around.
Edit: I just googled a pic of it. If the lock is double sided you would read one side then flip it and reader the other so you are correct.
@@BoredLockpicker thanks for the answer. I’ve been messing around with a Suzuki swift 2007 lock. The 2-1 tool don’t work due to sidebar in the door lock but the hu87 direct reader reads the 2-8 cuts (7) from door
But no luck yet getting it to turn
But I will have another go tomorrow
Stay blessed and thanks again for your great content
In the US Suzuki cars have a code on the door lock.
@@BoredLockpickeralso here in Europe im just training and apparently my skills are not good 😂 I have the key code and InstaCode gives me the bitting
But I like to give it a try even though just to practice
Where are you located at
Florida