Setting up SimHub Arduino controlled displays [BEGINNERS GUIDE] đ€ IT'S EASIER THAN YOU THINK!
VloĆŸit
- Äas pĆidĂĄn 20. 06. 2022
- Here to help you get started with SimHub and Arduino controlled devices. I'll show you it's easier than you might imagine! If you liked this video, please hit the likeđ and consider subscribing. And drop in your comments below the video! â
Subscribe to my channel here: tinyurl.com/yyhjua7h
PARTS LIST:
ⶠNano s.click.aliexpress.com/e/_ACaGt5
ⶠMAX7219 RED DOT Matrix s.click.aliexpress.com/e/_AlX5mj
ⶠWS2812B RGB LEDs bit.ly/3JLDEwe
ⶠ12LC LCD 2004 s.click.aliexpress.com/e/_AUabsP
ⶠTM1638 Module s.click.aliexpress.com/e/_9wYIX1
ⶠWS2812B RGB 8x8 Matrix bit.ly/3JMxGeg
â¶3D printed iFlag case STL model www.thingiverse.com/thing:473...
YOU CAN HELP SUPPORT MY WORK WITH A SMALL DONATION (THANKS):
ⶠYou can support me on Patreon: / simracingcorner
ⶠShow your support with a Ko-fi ko-fi.com/simracingcorner
You can help support Sim Racing Corner by using my affiliate links. I will earn a small commission for products bought through the affiliate links, but it won't cost you anything! Thanks!
ⶠAmazon (UK)amzn.to/3dNPW8d (US)amzn.to/2XEBgTf
ⶠBanggood: www.banggood.com/custlink/Gmm...
ⶠAliExpress: s.click.aliexpress.com/e/_A6He49
ⶠeBay: ebay.us/SR8jmP
ⶠJoin iRacing using my affiliate link: www.iracing.com/membership/?r...
ⶠBuy discounted game keys from my Kinguin affiliate link: www.kinguin.net/?r=60396
ⶠBuy discounted game keys from my Greenman Gaming affiliate link:
ⶠFollow Sim Racing Corner on Twitter to get notifications on new videos and other sim racing malarkey: / cornersim
đŸEQUIPMENT I USE TO MAKE VIDEOSđŸ
ⶠCamtasia video editor techsmith.pxf.io/c/3147906/48...
ⶠCanon EOS M200 (UK)amzn.to/3yeGENu (US)amzn.to/3pFflIg
ⶠElgato Cam Link 4k (UK)amzn.to/34Togzn (US)amzn.to/3IeoAHy
ⶠLogitech Brio Gaming Webcam 4k (UK)amzn.to/2DxRVPj (US)amzn.to/2zl24Ll
ⶠLogitech C920 Webcam (UK)amzn.to/2OYHvcB (US)amzn.to/2KshPoh
ⶠRazer Kiyo Pro (UK)amzn.to/3C6Faq1 (US)amzn.to/3A2Fog4
ⶠElgato Facecam (UK)amzn.to/3JIXF6M (US)amzn.to/3v5vz1B
ⶠRode NT-USB Microphone (UK)amzn.to/2OADN8Z (US)amzn.to/2PQuVBC
ⶠNeewer Dimmable LED Video Light (UK)amzn.to/3EFe4Hw (US)amzn.to/3rNDSxu
ⶠNeewer Advanced 2.4G 480 LED Video Light (UK)amzn.to/3DvhzyR
ⶠRALENO LED Video Soft Light Panel (UK)amzn.to/3GuzNlX (US)amzn.to/3y6YCRJ
*As an Amazon Associate I earn from qualifying purchases.
#Simracing #SimHub - Hry
ⶠShow your support with a Ko-fi ko-fi.com/simracingcorner
Can I use one namo with the 8 by 8 led matrix with two left and right separate matrixs?
Fantastic upload will definitely try this thanks
Great video thank you. Looking forward to getting Into this In the near future once I decide what displays I want to make.
Glad it was helpful!
Great video mate. Thanks for sharing your knowledge.
Glad you enjoyed it
HIya, first off, what an amazing channel, im a newbie and youve helped me alot, sooo.... lol I have an RGB 7x8 matrix with 3 wires, problem is Im not sure how to wire it or use simhub as there isnt a 7x8 only 8x8 I have a stock of Arduino uno, nano and pro micro, if you could lend me a hand I would be very appreciative.
I've got into sim racing to the point, where I moved up to a descent rig and this was next on the list.. And I love building stuff myself - so this is perfect for me and I'll be getting straight on AlliExp to get everything I need to build my ultimate button Box and Display.. Many thanks for this vid - given me great ideas and the knowledge I needed.. ALSO - I just looked back through your vids - a lot of stuff I need to watch - sub'd, like
Not sure If I want to get a 3D printer just for this though, so you or anyone else know of a good place to get something printed to my design..
There are 3D printing services out there that can do this for you. A quick Google search should come up with results for that. A cheap 3D printer will do the job, so depending on how much that costs for everything you need compared to a 3D printing service. It may be better value getting a basic 3D printer. Having one ends up being quite handy for other random bits and bobs too.
Very nice! If I want to use 2 display: one as iflag and another (ex: nextion) as lap display like the ones we have in the wheels Iâll need more than one arduino?
I don't know
Anyone know what size screws to use with with 3D printed iFlag case?
Hey is there a way for it to show my current speed when entering pit road?
If you set this up for lets say a button box, is the program SimHub required to be able to use it? If I brought it to another PC that didn't have SimHub, could I assign buttons like any other controller, or would that PC also have to have SimHub?
This seems the perfect place to ask. I want to wire a WS2812B LED Strip as well as a WS2812B 8X8 matrix, and was wondering if I can have them both run by the same Arduino? Do I just need to set one to like "D6" and the other to "D7" and it should work, correct?
Essentially yes. You can see I've done this in the video with one example.
Gnd - gnd
Vcc - 5v
Din - d5
Cs - d6
CLK - d7
CosĂŹ?
@@darinho23 Just follow what SImHub shows you, as I have demonstrated in the video.
Great video; I ordered and received a ws2812b today and works great. Would you be willing to share your 3D enclosure for it? Many thanks
Check vid description fella, there's a link.
@@SimRacingCorner Hmm i did look but can't see it now in the description but im sure it was there the other day when i watched the video.
@@J273 you're right, it's not there. I'll need to find for you. Hang fire, I'm not at my computer so I'll find it in the morning.
@@SimRacingCorner No problem, thanks very much
Here you go.... www.thingiverse.com/thing:4737578
Do you know why com ports would be blocked or not working even if trying to update? I canât connect any arduinos to my oc :(
Did you ever make the tutorial building the sim flag using a WS2812B and a Nano? I canât find the video.
Is it just three wires between the Nano and the matrix board?
Not yet, it's something in my list of things to do. Yeah, it's just 3 wires. And basically as simple as all the other stuff I run through on the table here.
@@SimRacingCorner thanks for the quick response. Just trying to put mine together now. Have wired the data cable to D4 and attempting to get it up and running with Simhub, but I donât really know what Iâm doing đ€·ââïž
Edit - random button pressing has won the day - all up and running now, amazing.
Hello everyone!! I don't know if anyone can help me. I have installed a ws2812b matrix and it works but the LEDs are disordered. I have tried the serpentine setting and it still doesn't show anything ordered. I don't know what else to do, I've searched and can't find anything that works for me.
Hello my friend,.love the channel !! I saw this video and was wondering if you could possibly help me out? I have a 3drap steering wheel, inside is a Arduino nano for the led's and a Arduino micro that is supposed to control the 58 functions of buttons, rotary dials etc. I didn't make the wheel I got it second hand, however it started disconnecting randomly until a few days ago it crashed my pc. I turned it back on but the wheel is not working. I had a little help from someone on Instagram and between us we've found that the micro board has been wiped clean. I do have the original sketch from the guy who built the wheel but I cannot get it to load back on. I have absolutely zero knowledge of Arduino so any help would be much appreciated. Many thanks Stu
Sorry, I wish I could help. I've only uploaded to Arduino's through SimHub, so it's a different process. There's going to be tons of videos tutorials on YT on how to upload sketches, though, so it shouldn't be difficult.
Whenever I click upload to arduino it says programmer not responding, do you know how to fix this?
Maybe if you don't select the correct Arduino, it may fail with this error. I haven't tried that, it's just a guess.
Come colleghi la matrice con Arduino?
It's the same as the other devices Iâve shown, but you will need to solder wires onto the board.
Iâm about to dip my toes into doing stuff like this but the biggest problem is finding cases for this stuff, as I donât own a 3d printer đ
I completely agree, It can be difficult to work with these displays unless you have a 3D printer.
@@SimRacingCorner Iâm pumped to hear the results of your âsound exciterâ video. I was so close to pulling the trigger on Sim 3dâs pedal rumble motors but itâs from the UK and by the time it gets to Canada, Yikes! Are you a big fan of the Nobsound amps? I had bought one for my bass shakers but it never really put out the proper power but Iâd assume it would work with the sound exciters no problem.
The Nobsound amps are fine when used with the appropriate shakers, and more than enough for these sound exciters. And of course, make sure the PSU being used with the amp is sufficiently powerful enough too.
3D print service is your friend. Find a 3D print file that fits your part, and send it to them and wait. My recommendation though is to buy an ender printer, but there is a bit of a learning curve if you're willing to put in the time + effort
Ma della matrice, quella a piĂč colori, non vedo come collegare
What do you mean exactly?
La matrice che indica le bandiere e che cambia colore
@@darinho23 Yes, and? Specifically, what is the problem. Make it clear exactly what you don't understand?