1999 EZGO TXT, Gas - Failed Starter Generator
Vložit
- čas přidán 16. 08. 2019
- Welcome to Kevin's Golf Carts CZcams channel!
Our Site - www.kevinsgolfcarts.com
Twitter - / kevinsgolfcarts
Instagram - / kevinsgolfcarts
Facebook - / kevinsgolfcarts
I earn a small commission from each sale when you use the links below. Using my links helps support my channel but it doesn't cost you anything extra!
Amazon Store - www.amazon.com/shop/kevinsgol...
Patreon - / kevinsgolfcarts
Kofi - ko-fi.com/kevinsgolfcarts
PayPal - www.paypal.me/theburns/5
Mattress Insider - goo.gl/rhQLMj
TubeBuddy - bit.ly/2okVnXe
Square - squareup.com/i/KEVINSGOLF
MagicLinks - bit.ly/2nGHPEY
Tools:
Cat LED Flashlight - go.magik.ly/ml/bhh7/
DEWALT Grease Gun - go.magik.ly/ml/bhh5/
Diamond Gloves - go.magik.ly/ml/ehdj/
Dremel 4300-5/40 Rotary Tool - go.magik.ly/ml/ehdh/
GLOVEWORKS Orange Gloves - go.magik.ly/ml/bhh8/
Gummout Carb Cleaner - go.magik.ly/ml/m00m/
Husky 30 Gallon Air Compressor - go.magik.ly/ml/kqd6/
INNOVA 3614 Compression Tester - go.magik.ly/ml/bhh9/
Milton 1/4" Coupler and Plug Kit - go.magik.ly/ml/bhha/
Milton 1/4" High Flow Coupler - go.magik.ly/ml/bhhb/
Milton 1/4" High Flow Plug - go.magik.ly/ml/bhhc/
Milwaukee 1/2" Drive Impact - go.magik.ly/ml/bhhe/
Milwaukee M12 3/8" Ratchet - go.magik.ly/ml/kqdh/
Milwaukee M12 12-Volt Battery - go.magik.ly/ml/kqdj/
Milwaukee M12 Rivet Tool - go.magik.ly/ml/kqde/
Mr. Funnel AF3CB Fuel Filter - go.magik.ly/ml/ehdf/
Neiko Impact Socket Set - go.magik.ly/ml/m89x/
Neiko Cordless LED Work Light - go.magik.ly/ml/bhh2/
The Ear Buddy Ear Plugs - go.magik.ly/ml/ehdg/
Tek Motion Ultrasonic Cleaner - go.magik.ly/ml/bhh4/
Voltec 8W 500 Lumens LED Light - go.magik.ly/ml/m8ag/
Camera Gear:
JOBY GorillaPod Tripod & Ballhead - go.magik.ly/ml/bhgf/
Manfrotto 496RC2 Ball Head - go.magik.ly/ml/bhgx/
Panasonic Lumix 12-60mm Lens - go.magik.ly/ml/bhga/
Panasonic Lumix 14-140mm Lens - go.magik.ly/ml/bhgb/
Panasonic Lumix GH4 - go.magik.ly/ml/bhg9/
Panasonic Lumix GH5 - go.magik.ly/ml/bhg8/
Ravelli AVTP Professional Tripod - go.magik.ly/ml/bhgg/
SanDisk UHS II 128GB SD Card - go.magik.ly/ml/bhge/
SJCAM SJ4000 WiFi Version - go.magik.ly/ml/kqcs/
SJCAM SJ8 Pro - go.magik.ly/ml/f7qq/
Audio Gear:
Galaxy Audio GT-V Lav Mic - go.magik.ly/ml/lx4f/
Movo WS-G9 Furry Windscreen - go.magik.ly/ml/m8a9/
Neewer Adjustable Mic Stand - go.magik.ly/ml/bhgl/
Pixel Wireless Lavalier - go.magik.ly/ml/mjxh/
Rode NT1KIT Condenser Mic - go.magik.ly/ml/bhgh/
Rode VMPR VideoMic Pro - go.magik.ly/ml/bhgj/
Rode Microphones DeadCat - go.magik.ly/ml/bhgk/
Rode VC1 10' Extension Cable - go.magik.ly/ml/bhhn/
Samsung 32GB MicroSD Card - go.magik.ly/ml/bhgn/
TASCAM DR-40 - go.magik.ly/ml/bhgm/
Lighting Gear:
Dracast 400 Bi-Color LED Light - go.magik.ly/ml/bhgo/
Genaray SpectroLED Daylight LED - go.magik.ly/ml/bhgt/
HyperSelect LED Shop Lights - go.magik.ly/ml/m8aa/
Ikan IBG-SB15 15lbs Sandbag - go.magik.ly/ml/bhhj/
Tether Tools 2-inch "A" Spring Clamp - go.magik.ly/ml/bhhm/
Misc Stuff:
Mpow PC USB Headset - go.magik.ly/ml/bhh0/
RAVPower 22000 USB Battery - go.magik.ly/ml/m8ak/
PURE SINE WAVE Inverter - go.magik.ly/ml/m8ai/
weBoost Drive 4G-X Cell Booster - go.magik.ly/ml/bhgz/
Disclaimer:
Kevin's Golf Carts cannot guarantee against unauthorized modifications or improper use of this information. Kevin's Golf Carts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Kevin's Golf Carts recommends safe practices when working with all tools, chemicals, lubricants, or any other tools or equipment seen or implied in this video. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Kevin's Golf Carts. If you are uncomfortable with replicating the actions used in this video, seek the service of a qualified professional. You have been warned. - Auta a dopravní prostředky
Thank you! I appreciate the time you take to explain why something failed. I’ll be taking my ezgo’s starter generator apart and see if it’s fried and how the brushes are. Please keep it up!
I would never attempt most of what you do but I still like how you explain the process.
Great video, very good info and repair process.
Nice work and video! Thank you. Hey I'm in Florida, hot and sticky here.
always find your video's informative. Thunder storms today. keep cool.
You do a really good job explaining. Thanks
Awsome video as always
About 96 with 96 per cent humidity! A normal south Louisiana day. It rained and the humidity was 100 per cent. Anyway, it was hot no matter what anyone says. Great job on the repair. I don't like cheap parts as they fail just when you are out in the middle of nowhereville.
Unfortunately, mostly everything is made in China by the same manufacturer. Its almost impossible to get away from it. If you want better, American made quality, you have to really spend the bucks. Most people just want it to work and want it now so Chinesium parts is the way to go.
Have you done a video on how to speed up one of them ?? With the Same motor ?
Good job and good video Thanks.
Thank you!
Do you have one of replacement of the belt, for the starter? I need to do that also. Thanks, very informative!
I may have one showing that. I don't have one dedicated to replacing the belts. They are pretty straight forward.
Kevin I have a 295 and just replaced carb,plugs,wires,fuel pump lines filter oil change,filter adjusted valves thanks to you
When I hook up the pvc to air box stalls leave it off runs??? Help please?
Also has good compreeson 150 and130......
It sounds like there is a blockage in the airbox. Connect the pcv hose and remove the airbox cover. If it runs, then the airbox has a blockage before the air filter.
Kevin's Golf Carts I did that can’t find anything took it to a shop and they brought it back said never seen anything like it......there is a bit of blow by coming out pvc but everything checks out. Tried to run it with pvc discounted and doesn’t have any power.in neutral it runs fast under a load nothing....anything you can think of would help. I love your videos and learn a lot from you. Thank you
You might have a blockage in the muffler. Your compression differential is a bit steep. I would do a wet compression test on the lower PSI cylinder and see if it improves. You could also have a weak CDI or ignition coil. Without hearing what the engine is doing, I can't really give you a good place to start.
@@Kevinsgolfcarts thank you !!- I will go through progressions and let you know what I come up with! Keep up the great videos!!!!
How do you warranty your work? Do you just warranty the parts applied and repaired? Please message me/respond. I have a business doing the same but am now getting serious with it and am curious from someone who has been in the business for a while about how your warranty your work.
'you folks out there can have that bullsh*t'.
I'm in KS. Told my wife yesterday it was so hot the wind just turns it from a regular oven to a convection oven...just cooking us faster.
Haha, there's hot, then there's more hot lol.
I find people buy those eBay starters and install them without checking f1 f2. A1 A2 studs for tightness. They just tighten the top not. They will burn up shortly afterward.
So I just put new one in my cart yesterday, went maybe 140yrds and " "pop" then smoke, looked under seat and brand new S/G smoking. I thought maybe I wired it wrong, any suggestions for me to confirm if I did wrong or posts tightened to tight from manufacturer? Any help would be appreciated
hi got a 2010 club car that runs fine until it get hot, thin click click and no go . what in the world would that be.
oh its a gas one , runs just fine for a while then as soon as it heats up a bit bam no start
Mine too
@@jedbuckeye001 Could be the spark plug or the coil.
I would suggest to anyone doing this to wear a mask and gloves when your changing the brushes because that carbon dust is HIGHLY cancerous!
Looks like the brushes were the problem, To much resistance at the commutator brush set! dam cheap junk!
Couldn't you have just machined the commutator ?
No, I don't have that equipment in house for that. By the time its brought to a shop for machining, cost and time down, I could just replace the starter/generator for less money.