great set-up john. I just started a new job working on permobil, Drive and many more. I have never used a multi-meter and this comes in handy. Thanks again.
I have seen a couple of 'How to' demos by John from Drive Technical Department. I just want to say that I think John is an excellent tutor, he puts the issues over in a very 'genuine and easy to understand manner' with no hint of being condescending at all. Thank you very much John for your help. Keith Wagstaff UK
Good video, but I'm working on an old Zoom 220 that has sat unused for 10-15 years. I replaced the batteries, and the fuse is good. But all it does is "click" in the reset button. The horn beeps, but that's it. Could something have deteriorated in that unused time? Thank you!
Hi! I have a Jazzy Elite 14. New batteries, motors, and gear boxes put in about 2 months ago. My question is, is it normal for the charger to get really warm? But not hot. Mine has been getting pretty warm about 2 hours of charging.
I have a 24v-8amp off-board charger for my Invacare TDX SP power wheelchair I normally charge it at night it turns on like normal to charge the yellow indicator light to register it charging goes to green light to register a full charge like normal but after that it shuts off for about two minutes then turns back on showing that it's doing a half of a charge for about two more minutes then shuts off only to repeat the cycle all over again. Wondering why?
Thank you for the Great Video. I have an old Electric Mobility Rascal 235 scooter. It has two 12 volt batteries, with plugins to each battery box. Each plugin has 2 female ports and 1 male. I think I can use your method to see if my 24 volt charger is working. When I plugin the charger, I don't see any movement of the Meter, so I charged up each 12 volt battery with 2 amp car charger, but would like to use the built in scooter charger. There's a reset button, and I pushed it, but didn't seem to make a difference. Thanks for the concise and informative Video.
I have a winsunny charger for a invacare Pronto M51 Surestep. The charger displays solid red and solid green when charging. I have 2 new batteries and they have been almost depleted over the last 2 weeks of use. I have charged the power chair over night 5 times but battery meter on the joystick is down to the red now and winsunny charger still displays solid red and green lights when charging. Any ideas? Great video by the way.
Hi John. I hope you're still viewing posts to this video. I need a wiring diagram for a CTM HS-1000 Power Chair. I don't think my charger for this chair is working. The manual says to watch the onboard amp meter to see the needle vibrate while the chair batteries are charging, but the needle doesn't vibrate. It doesn't do anything in fact. Let me know if you can help. And thanks in advance.
I have drive scout 4 wheel scooter that when I use the charger the fuse blowes. I use a charger I got from Amazon to replace ithow do i get a replacement from drive before the warranty is up ?
Thank you for your this tip. jazzy select 6 with 8 month acid sealed battery low usage in-house. original charger showing full charge green light, however joystick battery indicator showing low battery (only first 2 lights red, and orange, means 20% CHARGE), Battery measure 25.6v stand alone, and measure 24.3 under battery load test, (which measured while driving wheelchair and Voltmeter attached to joystick controller port). It is tricky as the load test for 1/2 mile on middle speed, load-reading start 25.4v down to 24.3v. The battery read 25v after load test which confused me. is the battery is ok and controller joystick reader is the problem. I replaced joystick controller as previous old one was giving same 2 lights low charge and in addition an error 7 times flashing code, which indicate joystick controller problem according jazzy select 6 manual. Do you think second (used) joystick controller also faulty in reading battery charge ?as it lights first 2 LED lights red and orange (out of the five LED) while in same time, battery voltmeter measured battery full 25v, and 24.3 under load test and same time the wheelchair separate corded charger indicate full charged battery greenlights? And if that the case, and since the controller giving false low charge indicator, if user forget and continue to leave charger hooked up extra 12 hours or more (while battery already fully charged as per charger green indicator light) does the overcharge would damage acid battery? Should I only consider the charger light as indicator as whether the battery fully charged or not AND disregard the controller light ? Thank you again for that amazing informative channel
Can you put volt meter on charger cord and read voltage from charger.mine goes from power on blue light to green light . It never goes to red like it's charging
My new batteries aren't charging, with two new chargers tries. The charger indicator lights are always red and green, and the fan doesn't run they way it does when the charger is charging. I believe the problem may be the xlr charging port (12 years old). Is there a way to test it with a multi-meter? If so, please explain how, as I am only familiar with rudimentary multi-meter use. Thanks.
I have a links SX3 scooter it was going very slow check the batteries the terminals were loose so I just put in new batteries. The batteries are hooked up correct but now the scooter will not go and they are fully charged. I have lights on the control but the scooter will not move.
Just installed 2 New batteries on a jazzy 600 power chair, my circuit breaker reset keeps popping out, chair wont work, what would next troubleshoot be, a new circuit breaker ? It's a 12 year old chair....
My cobalt scooter shows GREEN full charger, the lights come on the controller... but when joystick is moved it all shuts off. Batteries are old but always worked until suddenly. Please help. We have googled this all weekend. Thank you
I have a Jazzy and mine did this 3 months ago. It ended up being a "right motor fault". They replaced the right motor. I believe it was just a loose cable though. They replaced my batteries 7 times in the last 3 years and just realized yesterday they never gave me a new charger when switching over to Gel batteries. I have a 5 amp charger and I need an 8 amp charger. When your wheelchair shuts off.....check for a series of blinking lights. Count how many times it blinks. That tells you what is wrong with it. Gotta be a manual online somewhere. Good luck.
Hi I've got a drive scout when I press to go forward is bleeds and I'm in reverse speed and when I press to go in reverse it is in forward speed can you help thanks
Hi my name is Chris i just started at a medical supply company.. They hav3 me goin on service calls of power wheelchairs and scootmrs.. I would like to see more tutorials on how to fix and troubleshoot problems..
I have a winsunny onboard charger and 2new batteries but charger does not charge them and displays solid red and solid green always while charging overnight but batteries are draining down over Last 2weeks and have overnight charged 5 times at least. Any ideas Chris?
I have bought a new go go mobility and although the battery has been charged overnight when I take it out it is only lasting 15-20minutes if that. It starts on being on green but changes to red quickly. Can anyone help.
Jean Robinson check the batteries at your local mobility store. If your batteries are fine maybe check the motor break. John has another video to check that. If your break isn't fully disengaging it will put more strain on the motor requiring a lot of power from the batteries.
It sounds like your batteries are very low and have perhaps outlived their usefullness, which means they will not take a full charge. Check the volts with a volt meter. You should get 24+ volts if you have two batteries. Hope this helps.
hello, dear Good day my name is Mohammed From Libya I have a problem with the chair control When I changed the batteries it worked 24 hours and stood up This signal has become operational When I checked with joystick another Yali signals gave me the video 2 I want to help yjoystickou Sir Thanks
i have an envoy 4 scooter and i would like some help in why every time i charge the scooter the meter tells me i have only half a battery, it will not give me a full battery charge on the meter, also is there any way to make it go a bit faster? Please help as this makes me mad.
great set-up john. I just started a new job working on permobil, Drive and many more. I have never used a multi-meter and this comes in handy. Thanks again.
I have seen a couple of 'How to' demos by John from Drive Technical Department. I just want to say that I think John is an excellent tutor, he puts the issues over in a very 'genuine and easy to understand manner' with no hint of being condescending at all. Thank you very much John for your help. Keith Wagstaff UK
Keith Wagstaff
Excellent series of videos you've done! Thank you!
Thanks John. You made that so clear and simple even I understood it.
Joseph Smith
Very helpful, clear instructions, I followed along & solved my problem. Thanks
Thank you you been very helpful I need a teacher like you thanks again
GREAT video John!! Is there a way to bench the charger by itself w/o being plugged into a scooter or powerchair?
Excellent video 200 volt set looking for that simple setting thanks.
Thank you for the information, it was very helpful
Good video, but I'm working on an old Zoom 220 that has sat unused for 10-15 years. I replaced the batteries, and the fuse is good. But all it does is "click" in the reset button. The horn beeps, but that's it. Could something have deteriorated in that unused time?
Thank you!
John how do you repair 24 Volt 8.0 Amp XLR 24BC8000T-1 Battery Charger?
Hi.
Can you help me with how long the engine can run continuously?
Where do I find the model number on my Pride Select Elite Jazzy scooter. Thanks
Hi! I have a Jazzy Elite 14. New batteries, motors, and gear boxes put in about 2 months ago. My question is, is it normal for the charger to get really warm? But not hot. Mine has been getting pretty warm about 2 hours of charging.
Are there any differences for lithium ion batteries? Can you test an E scooter the same way~?
I have a 24v-8amp off-board charger for my Invacare TDX SP power wheelchair I normally charge it at night it turns on like normal to charge the yellow indicator light to register it charging goes to green light to register a full charge like normal but after that it shuts off for about two minutes then turns back on showing that it's doing a half of a charge for about two more minutes then shuts off only to repeat the cycle all over again. Wondering why?
Hi! The coolig fan of charger start spinning from begining or when is hot? Thanks
Thank you for the Great Video. I have an old Electric Mobility Rascal 235 scooter. It has two 12 volt batteries, with plugins to each battery box. Each plugin has 2 female ports and 1 male. I think I can use your method to see if my 24 volt charger is working. When I plugin the charger, I don't see any movement of the Meter, so I charged up each 12 volt battery with 2 amp car charger, but would like to use the built in scooter charger. There's a reset button, and I pushed it, but didn't seem to make a difference. Thanks for the concise and informative Video.
I have a winsunny charger for a invacare Pronto M51 Surestep. The charger displays solid red and solid green when charging. I have 2 new batteries and they have been almost depleted over the last 2 weeks of use. I have charged the power chair over night 5 times but battery meter on the joystick is down to the red now and winsunny charger still displays solid red and green lights when charging. Any ideas? Great video by the way.
Hi John. I hope you're still viewing posts to this video.
I need a wiring diagram for a CTM HS-1000 Power Chair. I don't think my charger for this chair is working. The manual says to watch the onboard amp meter to see the needle vibrate while the chair batteries are charging, but the needle doesn't vibrate. It doesn't do anything in fact. Let me know if you can help. And thanks in advance.
I have drive scout 4 wheel scooter that when I use the charger the fuse blowes. I use a charger I got from Amazon to replace ithow do i get a replacement from drive before the warranty is up ?
Thank you for your this tip. jazzy select 6 with 8 month acid sealed battery low usage in-house. original charger showing full charge green light, however joystick battery indicator showing low battery (only first 2 lights red, and orange, means 20% CHARGE), Battery measure 25.6v stand alone, and measure 24.3 under battery load test, (which measured while driving wheelchair and Voltmeter attached to joystick controller port). It is tricky as the load test for 1/2 mile on middle speed, load-reading start 25.4v down to 24.3v.
The battery read 25v after load test which confused me.
is the battery is ok and controller joystick reader is the problem. I replaced joystick controller as previous old one was giving same 2 lights low charge and in addition an error 7 times flashing code, which indicate joystick controller problem according jazzy select 6 manual.
Do you think second (used) joystick controller also faulty in reading battery charge ?as it lights first 2 LED lights red and orange (out of the five LED) while in same time, battery voltmeter measured battery full 25v, and 24.3 under load test and same time the wheelchair separate corded charger indicate full charged battery greenlights?
And if that the case, and since the controller giving false low charge indicator, if user forget and continue to leave charger hooked up extra 12 hours or more (while battery already fully charged as per charger green indicator light) does the overcharge would damage acid battery? Should I only consider the charger light as indicator as whether the battery fully charged or not AND disregard the controller light ?
Thank you again for that amazing informative channel
Hi John trying to speed up my drive wheelchair. 4 to as fast as it would go. Is it possible? Thank you.
anything about gogo pride front control removal
Do you have a video like this one for a Pride pursuit or a Pride GoGo sport
Can you put volt meter on charger cord and read voltage from charger.mine goes from power on blue light to green light . It never goes to red like it's charging
Is it possible to repair a battery Charger?
Is there a reason why a scooter has 2 battery?,is one for the control panel and circuit and the other for the motor?
They have two batteries to get the 24volts DC required to operate the chair or scooter.
My new batteries aren't charging, with two new chargers tries. The charger indicator lights are always red and green, and the fan doesn't run they way it does when the charger is charging. I believe the problem may be the xlr charging port (12 years old). Is there a way to test it with a multi-meter? If so, please explain how, as I am only familiar with rudimentary multi-meter use. Thanks.
Hi Bob. Same issue with a winsunny onboard charger and 2new batteries. Charger always steady red and green. Did you find your answer to the problem?
Hello . please. may scooter. It runs very slowly about 8 km / h. The battery works regularly. What is the reason? Thank you very much
I have a links SX3 scooter it was going very slow check the batteries the terminals were loose so I just put in new batteries. The batteries are hooked up correct but now the scooter will not go and they are fully charged. I have lights on the control but the scooter will not move.
Just installed 2 New batteries on a jazzy 600 power chair, my circuit breaker reset keeps popping out, chair wont work, what would next troubleshoot be, a new circuit breaker ? It's a 12 year old chair....
My cobalt scooter shows GREEN full charger, the lights come on the controller... but when joystick is moved it all shuts off. Batteries are old but always worked until suddenly. Please help. We have googled this all weekend. Thank you
I have a Jazzy and mine did this 3 months ago. It ended up being a "right motor fault". They replaced the right motor. I believe it was just a loose cable though. They replaced my batteries 7 times in the last 3 years and just realized yesterday they never gave me a new charger when switching over to Gel batteries. I have a 5 amp charger and I need an 8 amp charger. When your wheelchair shuts off.....check for a series of blinking lights. Count how many times it blinks. That tells you what is wrong with it. Gotta be a manual online somewhere. Good luck.
Hi I've got a drive scout when I press to go forward is bleeds and I'm in reverse speed and when I press to go in reverse it is in forward speed can you help thanks
I replaced the batteries, Now I do not get any lights on nor voltage from any of the 4 prongs from the connector to the joy stick.
Have you checked the fuses and circuit breaker of the battery box?
Hi my name is Chris i just started at a medical supply company.. They hav3 me goin on service calls of power wheelchairs and scootmrs.. I would like to see more tutorials on how to fix and troubleshoot problems..
I have a winsunny onboard charger and 2new batteries but charger does not charge them and displays solid red and solid green always while charging overnight but batteries are draining down over Last 2weeks and have overnight charged 5 times at least. Any ideas Chris?
PLEASE HELP!!! What is "on" on the on/off switch? Is it "O" or "l"?
O = Out (off) I = In (on)
gging
Why my charger is green light and red light but doesn't charger my ebike came you tell me why doesn't charge
can putting a reducer to the battres do any harm my name is roy
I have bought a new go go mobility and although the battery has been charged overnight when I take it out it is only lasting 15-20minutes if that. It starts on being on green but changes to red quickly. Can anyone help.
Jean Robinson check the batteries at your local mobility store. If your batteries are fine maybe check the motor break. John has another video to check that. If your break isn't fully disengaging it will put more strain on the motor requiring a lot of power from the batteries.
It sounds like your batteries are very low and have perhaps outlived their usefullness, which means they will not take a full charge. Check the volts with a volt meter. You should get 24+ volts if you have two batteries. Hope this helps.
Why couldn't you not just test the charger by hooking the volt meter directly to the XLR Connector itself?
hello, dear
Good day
my name is Mohammed
From Libya
I have a problem with the chair control
When I changed the batteries it worked 24 hours and stood up
This signal has become operational
When I checked with joystick another Yali signals gave me the video 2
I want to help yjoystickou
Sir
Thanks
My wathes 00218926813267
If send vidio joystick
Wheelchair chargers
i don't have a meter
i have an envoy 4 scooter and i would like some help in why every time i charge the scooter the meter tells me i have only half a battery, it will not give me a full battery charge on the meter, also is there any way to make it go a bit faster? Please help as this makes me mad.