Video není dostupné.
Omlouváme se.
YOU can remap LAUNCH CONTROL in your car! - BMW 323i e46 MS42 M52 - DIY Tutorial #2
Vložit
- čas přidán 15. 08. 2024
- In this tutorial we'll cover the basics of remapping the MS42 ECU in our M52TUB25 323i (also applicable to the M52TUB28 328i ). We'll do this by programming launch control into your ECU as an example.
Tutorial introduction episode: • 220BHP from our BMW 32...
Useful links (not sponsored in any way!)
- INPA cables: www.ebay.com/s...
- Romraider: romraider.com/...
- Definition file: www.romraider....
- Flash software & wiki: www.ms4x.net/i...
- Loads of information around OBD & Software: blog.obdii365.com/
- Launch control write-up: www.romraider....
0:00 Fly!
0:29 Introduction
1:23 Goal of this tutorial
2:09 My computer corner / keyboard
2:43 INPA cables
3:44 Laptop
4:23 Software
4:51 Software disclaimer
5:19 Start! Connect charger & power
5:39 Check connection to the car
6:15 Read your ECU
6:55 BE STRUCTURED
7:17 Save your BIN file
8:08 Start edit of the file
8:37 Definition files
9:10 Understand & edit the values
10:53 Edit column titles
12:11 Change the RPM for LC
13:18 Checksums
13:38 Checksum tools
14:44 Write to the car!
16:57 DID IT WORK!??!
18:15 Bye!
Thanks a lot. I absolutely hate the launch control, which was programmed by the previous owner of my E46. Now I know what to look for to remove it.
How did you remove it? I hate my pops and bangs tune
This is an excellent video. The guidelines are very clear. Keep the videos coming!
Worked perfectly on my e46 323ci. Thank you for this information
dude.... THANK YOU SOOOOOO MUCH for that
Dude thanks to you i managed to fix my intire ecu and even add hardlimiter deleted o2s and stuff
Big and massive thanks!!!!!!
Dankjewel voor de informatie man, ik ga zeker alle video's bekijken😃👍
Thank very helpful, the details of the leads needed is really helpful
awseome video, I have been looking for one just like this for a long time. Would love a video like this about full read of ecu too!
1 thing, checksum is a well known way to prevent malfunction by damaged software. Not a way to prevent modification.
thank you alot man i needed that new sub
Bij deze geabonneerd, geweldige uitleg, duizend maal dank hiervoor. Simpel maar zeer effectief, voor een leek ook goed te begrijpen! Ik hoop dat je nog veel meer van dit soort filmpjes gaat maken, ook o.a over pops en bangs, rev cutter etc, :DD
Thanks Patrick! We zijn nu een z4 2.5 m54 aan het aanpassen. 3.0 inlaat spruitstuk en inlaat nokkenas. Ook het tunen van de auto filmen we (met een dyno voor- en na!). Stay tuned. En nogmaals dank, wordt enorm gewaardeerd!
@@BuckleUpGarage heey. Ik en een vriend hebben precies dit geprobeerd op mijn MS42 M52TU 323ci, maar bij ons blijft launch control zodra je rijdt ook,
Eerste, tweede, en derde versnelling gaat niet verder dan t ingestelde toerental van 3500, normaal rijden wil dan niet meer haha. Wat doen we fout?
Awesome tutorial you have my Sub good Sir!
Ok thanks for a really informative video, i know its 2 years old now but its helped me further.
Followed everything you said but something is wrong though....
It limits at 3500 in all gears 😳
I have written the original file back for now
What did i do wrong?
Any advice would be appreciated
Also, did you ever make a video for pops and bangs?
fuck galetto, setting it up with inpa cable is a pain in the ass, especially if you didn't include how you got it. just get ms4x flasher, it also has auto checksum for .bin files before you write it to the car, it's a great piece of software.
Lowkey I want to do this just for the fun of it
Great stuff man, finally in the table title you wrote 400 or 500? I am starting to ECU modding on my own! I did full and partial read with MS4X Flasher, and then will try to write. Greetings
Hey man ! I just got a cable and i want to start coding myself , how did it go with the ms4x flasher ? As far as i understood , you replace galetto with it. So its a tool to read and write with , did it work well for you ? And did the checksum correction work with chipster ?
quistion : when the car drives in 1st gear after the breakpoint of the revlimiter used for LC, what will be the new rpm limit in that gear. what setpoint is used for that ?
More videooos!! Can you explain something about vanos tweaks? Im working with tunner pro and romRaider (on ms42)
Please make more videos
Can you explain how to connect ecu to computer? Thanks
More video please :)
Question how to remap BMW 318 i E46 M43-TUB19 to do 3000rpm and maximum 30-33 KPH on all gear not over 30-33 KPH ????
Can you send me the checksum corrector because they took it off the wiki :(
Does this work with a simple K+Dcan cable on a BMW E90 2009? Or should I buy an MPPS cable and start from there?
Can you do a video on logging and tuning double vanos cam phasing plsss?
The process is very interesting, I know the update process but I want to learn how to make pop and bang and LC, it can be done in Automatic transmission MS42 323i
I don't think LC is possible on automatic but tell me if you found it
Do i need Boot mode on the Ecu
I'm stuck on the step with Gellato. I'm getting a message that says,"opening port impossible".
What do I do from here?
this is now outdated and wayyy easier with tunerpro and ms4x flasher. but nice video anyways :)
Hello, I need your help, I downloaded Galeto but it doesn't work, can you tell me where to download the original program?
I have a problem ,,my car can not start ...can identification dme...
Hello, where can i buy the blue buttons than you have in the central panel? Or what is the name of this types of buttons?
SUPER MAN!
can you show me how to enabe pops and bangs?
i have m54tub28 ms42
i have already flashed with rom rider for disabeling sec. air pump and post cat o2 sensors!
i see there the pops and bangs with ac but i can not find a guide online
tanks in advance and greetengs from romania!
Just search up e46 pops tune fourms and you should find many discussions about that topic
Hallo, ik heb even een vraagje. Ik heb romraider en romraider logger. Ik kan ecu/dme lezen,aanpassen en schrijven.
Ik wil heel graag mijn ontsteking loggen op romraider. Knock adaptation. Het gaat om een 323 ms42.
Kan jij mij dat uitleggen? Is het uberhaupt wel mogelijk?
Bij ms41 wel mogelijk maar ms42 lukt het mij niet om het in beeld te krijgen
love u bro
It is working for 318D ?
What is with part 3??
Can you please do a similar video about popsNbangs
I know this video was filmed a while ago, but if you know, is there any way to remap 318? In the N42/46 engine MT
I'm wondering the same, did you find the solution?
What's the software for programming the ecu?
Hey man leuke video! Ik heb zelf een e46 323i en heb wat probleempjes en in de garage kunnen ze niet vinden wat het is. Zou jij misschien willen helpen?
Hi Tom, je mag altijd een email sturen naar junior@autosmile.nl . Wellicht kan ik helpen :)
interesting
Hehe eindelijk een Nederlander die er verstand van heeft top .
Heb ook bijna zelfde bouw als die 323 van jou op de nokkenas na .
Nou wil ik de disa open laten tot 6500 rpm kun jij dat ook fixxen .
Dacht dat die bij de ms42 dicht gaat na 5500 rpm ?
En geaobonneer natuurlijk:)
@@marcela8021 I'm from Ireland and have 330ci
Found the video interesting and will be giving this a go
I will subscribe don't worry!
Do i need to have the ecu on bootmode?