EGR Valve Disassembly and cleaning of the on Citroen C3

Hello guys,
the egr valve on citroen C3, C4, Peugeot and Ford Fiesta mount equal qusi engines.
The egr valve is very simple to disassemble, to clean with petrol or solvents.
If very dirty, also check the iron pipe that goes to the intake manifold.
🔔 Subscribe to my channel and click on the bell 🔔 for new videos
Cars and Furious ►bit.ly/2HnnXLG
Thanks for watching!!! Leave a like and comment!
#diy #citroen #ford #peugeot
*FOLLOW ME ON SOCIAL MEDIA! *
INSTAGRAM ► cars_and_furious_
FACEBOOK ► bit.ly/2fdn7Fo
TWITTER ► / carsandfurious_

[@robbybobbijoe]

My C3 2006 with the same engine is displaying a EGR error on the display which doesn’t let the car pass the yearly inspection. I’ve disassembled everything and I have the EGR in my hands, now how do I clean it and make sure it’s working properly? I’m not good with cars but my stepdad is helping me! :)

[@carsandfurious_]

Hello, you can clean it, but to test if it works you need a diagnosis on the machine. here to clean it, even if it's different it's an egr. czcams.com/video/Y9cJzFeJEuo/video.html

[@mohamedvlog4328]

Bravo 🙂

[@carsandfurious_]

Grazie molte!!

[@MrLK97]

Hi, when reassembling did you use the same old clamp to connect the iron hose with the egr? I did so and now it's leaking exhaust gas right there. Do you know if there is a clamp that can be screwed so it won't leak?

[@carsandfurious_]

Hello, yes i used the same clamp. I don't know if there are any such clamp on the market. It has a particular shape. Did you tighten it too much? Check if it is deformed.

[@MrLK97]

@@carsandfurious_ I think I would need a certain type of pliers to put it back together tight. Unfortunately I dont have these so it's a little bit loose on there now. Do you have a trick to put it back on there?
Thank you :)

[@carsandfurious_]

@@MrLK97 Yes! uses a "pincer" is a pliers to break from carpenter.
I don't know if that's what you call it. with that you can gently close that strap. let me know !!

[@rukadesigns]

hello, you can buy a spare part that has a bolt instead of a clamp, full compatible with c3 hdi. the oem reference is 16283j

[@laurentjamert]

@@rukadesigns 👍
www.cdiscount.com/bricolage/electricite/kit-pour-voiture-valve-egr-de-serrage-en-acier-ino/f-1661416-auc0786293386693.html?idOffre=442713706&cid=search_pla&cm_mmc=PLA!COR!AUT!MP!984091388!m144796263_pAUC0786293386693-442713706_l9056034_tpla-942789094270_&gclid=CjwKCAjw4_H6BRALEiwAvgfzq3l9uHl9cHC4VyPv91BQ1FmplyltVUMOWqrV5accs2FrGn1OqLz1YBoCqo0QAvD_BwE

[@SaeedGhahremaniSOODI]

Please I need how to remove egr Citroen c1.4 diesel I can’t find any video

[@carsandfurious_]

I'm sorry I don't have this car anymore. it is positioned at the rear under the air filter, it is not difficult to remove.

[@sicks6six]

Take care not to drop the shim as you disconnect the EGR from the engine . . .some car accessory's sell grooved clamps like that on the steel pipe, similar to a jubilee clip,

[@carsandfurious_]

Good advice!!

[@sicks6six]

@Still Awake nz
WITH A PAIR OF PLIERS IT CAN BE PUT BACK ON FAIRLY EASILY. BUT A JUBILEE CLIP REPLACEMENT IS EVEN EASIER.

[@jaker8795]

Can you move it by pressing it with your fingers

[@danilo367]

i reccomment not to do it because next time tou turn on the car in some you could display an engine check error due to the fact that the egr is not in the correct position

[@philphilippe1283]

Petite question , j'ai une Ford Fiesta 1.4l HDI de 68 ch (même moteur que 206 ) et je viens de changer la vanne EGR car ma voiture tremblait au démarrage et des à coups avec perte puissance et défaut ODB vanne egr gelée .Dois-je la passer à la balise. Pour calibrer calculateur ou autres . Car elle tremble encore au démarrage mais roule normalement.
Merci pour ta réponse.

[@carsandfurious_]

Bonjour désolé pour mon retard, essayez de faire vérifier les bougies de préchauffage et les supports moteur.
Fais-moi savoir s'il te plaît.
Merci

[@philphilippe1283]

@@carsandfurious_ j'ai reparer ma voiture . C'était un 1 injecteur qui était h.s. les symptômes était tremblement au démarrage et perte de puissance (trou dans l accélération ).

[@carsandfurious_]

@@philphilippe1283 j'ai imaginé

[@7302ab]

Are they reliable

[@carsandfurious_]

Yes, they are good cars I have not had any problems!

[@strangermaniacos686]

Would you suggest to block the Egr valve ??

[@carsandfurious_]

yes, I don't know if it gives you an error in the instrument panel

[@emilrijsemus4178]

@@carsandfurious_ it doesn't

[@carsandfurious_]

Also watch this video for EGR:

czcams.com/video/Fep2kh1A53o/video.html