Part 2. Air assist for the AtomStack A10 Pro laser engraver. Honeycomb base & CE safety glasses.
Vložit
- čas přidán 11. 11. 2022
- I bought the AtomStack Air assist kit , honeycomb base and CE safety glasses with my own money.
The AtomStack A10 Pro laser engraver was provided by AtomStack.
Part 1 where I assemble the A10 Pro can be found here.
• Part 1. Let's assemble...
Part 3 we will try cutting some wood to see how thick the 10W dual diode laser can go.
AtomStack Website link: bit.ly/3WW3Iwc
AtomStack Product link: bit.ly/3TuK5IT
AtomStack Amazon product link : www.amazon.com/ATOMSTACK-Engr...
Also, here is an A10 Pro 10% off code for you and your audience: 44NBMNXT (Valid period: 2022.11.11 07:00 CET - 2023.2.07 23:59 CET)
Here is a link to the AtomStack A10 Pro on the AtomStack web site. They seem to have the best price.
www.atomstackofficial.com/pro...
Here is a link to the AtomStack air assist kit 1.
www.atomstackofficial.com/pro...
Here is a link to the AtomStack honeycomb base.
www.atomstackofficial.com/pro...
Here is a link to the AtomStack CE safety glasses.
www.atomstack.net/products/at...
Here is a link to videos by Makers Muse on laser safety that everyone should watch. • What YOU had to say ab... • Are cheap laser cutter...
Hit the LIKE button so I know you care.
Sub for more Diode laser videos.
Explore the Robothut channel for over 1200 videos.
Thank you for this - just fitted the air assist in 5 minutes! 😊
Great tutorial can’t wait to see it work !
😎👍🏻
where i can found this database
good presentation . i notest you shaking alot with your hands . there are some conditions that can cause that .
wilsons condition or hypoglykemie condition . bolt are medication for it . also to much coffee or smoking .
stress , angxiety . dehydrated .symptoms are feeling excausted , very sleepy .
New meds from the doctor, they are still trying to fix me. It will take months to iron it out, I think.
I’m not clear on what the point of air assist is. I can understand if it were a vacuum system sucking away fumes. But how does blowing air onto the surface help? BTW, it’s great to have you back. I hope you’re doing better. (Duh - I just noticed this is part 2. I’ll check out part 1.)
With lasers when you are burning something, it is best to blow the debree away. You want to keep the laser Lense clean, so the laser Lense is encased in a pressurized hood that the air moves thew. If cutting something like thick wood, you will not make the cut 1 pass, it takes multiple passes and you need to blow out the debree, keep the cut clean for the next pass. The honeycomb base allows the smoke and debree to be blown out the bottom. It does not have anything to do with smoke removal, exhaust fans are used for that.
@@Robothut Got it! Thanks.