AtomStack A10 Pro, 10W optical Laser. Test cutting 2, 4 & 8mm plywood, air assist. Part 3.
Vložit
- čas přidán 22. 08. 2024
- I bought the AtomStack Air assist kit , honeycomb base and CE safety glasses with my own money.
The AtomStack A10 Pro laser engraver was provided by AtomStack.
Part 1. Assembleing the A10 Pro can be found here.
• Part 1. Let's assemble...
Part 2, setting air assist, honeycomb base and safety glasses.
• Part 2. Air assist for...
AtomStack Website link: bit.ly/3WW3Iwc
AtomStack Product link: bit.ly/3TuK5IT
AtomStack Amazon product link : www.amazon.com...
Also, here is an A10 Pro 10% off code for you and your audience: 44NBMNXT (Valid period: 2022.11.11 07:00 CET - 2023.2.07 23:59 CET)
Here is a link to the AtomStack A10 Pro on the AtomStack web site. They seem to have the best price.
www.atomstacko...
Here is a link to the AtomStack air assist kit 1.
www.atomstacko...
Here is a link to the AtomStack honeycomb base.
www.atomstacko...
Here is a link to the AtomStack CE safety glasses.
www.atomstack....
Here is a link to videos by Makers Muse on laser safety that everyone should watch. • What YOU had to say ab... • Are cheap laser cutter...
Hit the LIKE button so I know you care.
Sub for more Diode laser videos.
Explore the Robothut channel for over 1200 videos.
Make your own puzzles, too! This is fantastic, especially the relief on the photo/carving. I always enjoy and learn from your videos, thankyou for sharing this.
That’s really cool Kind of amazing we have home lasers for personal use Now we just need laser guns! 🔫
very cool machien .
Pretty cool
Hello and congratulations for the excellent video. What minimum size (of support surface) is needed to fit both the engraver and the air assist?
Larger than the part you are engraving but small enough to fit in the machine.
@@Robothut Thanks for the info. More specifically, I would like to understand what is the width and depth of the plane that is needed to be able to place all four feet of the engraver's structure on it.
where did you get the data base for the atomstack. cheers
Cool , but can it cut a 2x4 😎👍🏻
I have to get a CO2 laser for the big stuff.
@@Robothut an video explanation of that would be good in your next video . Thanks John have a nice day
hello! thanks a lot for the video! you still using that machine? u can cut mdf 5mm with it?
I have not tried MDF just plywood so far.
@@Robothut more hard to cut right?
I think so, do to all the glues and resins used to hold MDF together.@@TiagoSerrart
@@Robothut thanks a lot for all your feedback.
you are able to cut 5mm plywood with your machine right?
What do you use for engraving
Both my Atomstack A10 and my old NEJE 30watt laser.