Mitsubishi Lancer Fix: Replacement of Front and Rear (Torque) Mounts, (shaking & Vibration)
Vložit
- čas přidán 7. 09. 2024
- Hi,
This video will show you how to diagnose a bad engine/torque mount (front/rear/sides) and replacement.
Thanks and good Luck
I did not remove sub frame
I removed air filter compartment and hose, loosened transmission mounts and gave the whole engine a little lift with a jack and managed to replace this mount from inside engine pay
+K4LI4NY4, Hi, did you also need to loosen the front and right side (passenger side) engine mounts to get to the rear torque mount? thanks
+AfzaMoto
I replaced both front and rear mount starting by completely remove the front mount and its bracket, removed the 4 screws holding the rear mount, one of them was a real pain, there was absolutely no way to get the rear mount out due to space limitation, loosened passenger and transmission mounts, support engine and transmission by 2 jacks one for each, removed air filter compartment and hose to throttle to make some room, lifted engine and transmission a little and almost got the rear one out but needed more space, and ended up by completely disconnected transmission mount to be able to lift transmission side enough to get the rear bracket out. then put new rear mount, install transmission mount and tighten passenger mount, then install front mount. this is the exact thing I did 2 years ago.
+K4LI4NY4 Thank you for the details, I am sure it will benefit someone who is planning to undertake this project. I am also considering replacing transmission and engine mounts.
+AfzaMoto
I am not sure but from what I understand from your video you pulled it out from passenger side downward. I pulled it upwards from inside engine bay driver side. I also had to remove the bracket that hold the mount to the engine to make enough room.
good luck with the other mounts
keep posting videos
yes, once again thank you for your feedback. I am sure it will help :). Consider posting a video of your future project on your car. Thanks
nice video explained everything good.
+David Lazaro Thank you :)
hey i got the same problem with you. when i changed transmission from N to D it was shaking but if i push the accelerator until 2000 Rpm that vibrate was gone.. did you know my problem? i felt it in my steering wheel and then on my pedal
yeah mine was similar to yours.
Zapatense,, I checked it on eBay, pictures do not show the rubber part, I have asked a seller to confirm. In the meantime you wanna check it yourself, just go on eBay or amazon type "Mitsubishi lancer 2006 2.0l motor mount" and it will show you bunch of listings. Ask the sellers if it comes with the rubber. If no one has it then ask the dealer for this. ( I might check it myself later). If the dealer is really expensive then perhaps check your local junk yards or Craigslist.com Many people cannot sell this car so they try to sell parts. Very last option, contact me I might be able to find one. Thanks and good luck.
I went with a distributor but I am told that is already discontinued and o went to other stores and They only sell the moubt without rubber base thats why Im asking to every body If you find the spare could you please do me the favor and sell it to me and i Will deposit the cost of the part and freight
okay no problem, good luck
where can i find the rubber for the right motor mount i dindt see how do you get it off .....just the front and back mount
+zapatense i have not seen the rubber being sold individually for the right side motor mount. It comes with the new mount. Please let me know if that answers your question? thanks and please support my channel by subscribing. thank you
there is a motor mount under the power steering and under that mount its a rubber piece .......its for a mitsubishi lancer 2.0 2006.........and i cant find it......do you know something about it
I took some pictures of my motor mount, please click on the link to view the pictures or cut and paste in your internet browser.
drive.google.com/file/d/0B25DZ6aT-Sx-Yk5KU0FfeUljeXE5cWxRbGVCdWwyRGpCU0RF/view?usp=sharing
drive.google.com/file/d/0B25DZ6aT-Sx-dl9NcVFkbm9XblhROWlySVp1NXZGZXcwZE5Z/view?usp=sharing
if it is the same, then the rubber should be part of the mount and when u buy a new mount it should come with it.
yes its the same mount im talking about .....there is a rubber part under the mount ........that rubber part im looking for .....because mines is broken .....do yo know where can i buy a new one .......
sorry i have not seen this rubber being sold by it self. try ebay, amazon, rockauto etc. worst case buy a new one, i saw one on ebay for around 30-40 bucks.