How to replace a Motor Mount or Transmission Mount
Vložit
- čas přidán 1. 03. 2014
- How to replace an engine mount, motor mount, or transmission mount. Learn the main methods for replacing a bad motor mount or bad transmission mount. This will give you an idea of how easy of a job changing a motor mount is!
How to Diagnose a Bad Motor Mount: • How to diagnose a bad ...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: czcams.com/users/subscription_c...
-CZcams Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - Auta a dopravní prostředky
I'm not gonna lie, watching your videos are kinda therapeutic and informative. I wish u great health and wisdom. Peace..
I couldn't stop laughing when the mount hit him he soullessly said ow
Me too man 😂😂. He is funny.
Same!! Hahahahah
@@alastair_the_lyon minute?
i only came to the comments after that happened
"Ow" is said by me every 5 minutes when I'm fixing things on my own car!
When comparing his old videos with his newer ones the camera quality and quality of information is the same but you can tell how different his energy is. With his older videos he is seldom and serious but with his newer videos he is very enthusiastic and entertaining.
Now it's "HEY, GUYSSSSS!! CHRISFIX HERE!!! AND I'M GOING TO SHOW YOU HOW TO FIX YOUR MF'ING CAR!!!"
youtube forced him to do so, otherwise they would demonetize his channel
Bro said this 4 years ago and still true today
My car works because of you.... You are awesome
I LOVE THIS GUY!!! Ground-level, simple to understand, very thorough. Well done!!!
you make some of the most helpful video's on the internet
Steve Richardson Thanks a lot Steve! I do my best!
I second that.....great stuff.
I learn more watching his videos than I did at my trade school.
Chris Fix you are awesome dude, you give a person the knowledge that they can do it themselves with a little discipline I really do appreciate all the videos you do for everyone. thanks again
I gotta tell you Chris, I love your videos. I love how you explain things. You are among the top 3 people I enjoy listen to here on youtube. You're a good man Chris.
i can't thank you enough for the way you keep things simple and not have to hear yourself over talk. I recently watch a video for a 3 minute fix that was 14 minutes long. to much blah blah blah(which seems to be the norm). Obviously, your vids are not for the completely inexperienced, but for most of
diy, perfect. Thanks again and keep up the good work
I like that he doesn't spend the first 10 minutes of every video lecturing the audience before showing us anything and that he actually shows how to do it with mostly basic hand tools to prove that it can be done when so many videos go right to the impact wrench assuming that everyone has one. I love my air tools and they were a great investment but not everyone can afford a set nor can they be used in every situation.
Great video, well done. Laughed when you pried out the mount and yelled ouch.
Thanks Brian!
marvel
Very well explained! Chris is an excellent instructor.
Love it! You saved me $500.00 that the mechanic wanted from me.
+Hamady Ba Awesome! I am glad to hear it!
Mine wants over $1,000. Luckily, I have my Chris fix Batman light I shine onto the clouds when I need help! Thanks Chris
Lol *wap* "ow, little painful there but"
I died 😂😂
Wap lol
Lol
I like these instructional videos. I do have some doubts about when you say if you can change one, you can change them all. I do think certain vehicles have differences that can make them substantially more difficult.
Thank you, the wrench trick is something I never knew about before. I’ve gotten by on tapping the wrench with a hammer, but often there’s barely any room to do that. Going to double up on wrenches from now on.
Fantastic, you have a gift for demystifying this stuff mate. So many times I've read things like '"Oh, just remove the motor mount and drop the engine down" - but if you don't even know what a motor mount looks like to begin with you can start descending down a never ending rabbit hole and forget what problem you were originally trying to solve lol :-)
I love that you don't just show how to replace a mount - but WHY you might need to as well and what could happen if you don't. It's important information often missed by others. Money was tight growing up with just my mother and we only ever took our car to the mechanic when it was broken. I thought 'maintenance' was an oil change once a year. Best wishes from New Zealand, 2021.
Chris Fix your video was very helpful. Going in I didn't have a clue as to the complications I would be facing as a DIY job. You showed very clearly what has to be done and now I need to decide 1) let a mechanic do it and pay through my schnoz or 2) do it myself. Thanks again,
Al
I will probably never do this in my life but I really enjoy this video and your other videos. You are very knowledgeable and talented both as teacher and cameraman. Very interesting to watch! Thanks!
Thanks a lot! I am glad you learned a lot!
I do the same, probably wont ever do it but its fun to watch and learn
same to me, will not gonna do it by myself but sure it is helpful to identify the problem and deal with the workshop
I did it looks good
Thanks a lot for a wonderfully clear explanation, Chris. I was able to change my 2001 Windstar's front and rear engine mounts and driver's side transmission mount successfully thanks to you. You earned a thumbs UP and a subscriber.
Chris, you and realfixesrealfast are the only one's I've seen work on windstars, which is what my wife drives. I now have a clear understanding and confidence that I can do some of the work myself, AND I'M NOT EVEN A MECHANIC!!!! Thanks so much for putting in the time to show great instructional videos for guys like me. Keep up the great work! Take care.
moneygeewtee Thanks a lot man! I am glad my videos have helped! That windstar has 300k miles on her so you know it is being maintained lol. I will have a new video soon on how to replace the rear window defroster switch and also how to diagnose what is bad. New automotive 'how to' videos every Thursday and most Mondays so stay tuned!
Looking forward to it. Thanks again Chris. Take care.
Just came back only to review 2-open-wrench trick! Saved me time, nerves and money! Thanks, you're a real pro!
I love when things go smoothly
you're videos are very helpful,makes me work on my car from now on thanks.
Great tutorial, as all of your videos. Everything is straight forward and clear for the vehicle you are working on. I am going to lift 1-2 inches the engine on RX 350, 2015 to get access to the one of ATF pan bolt, which is blocked by sub frame. Unfortunately, I don't have that solid place to put my jack, and I would never place the jack under the ATF or oil pan, despite there are a lot of videos with the jack under the oil pan. My question is can I jack up a bit the engine by placing the jack under the transfer case. It looks for me like a solid place.
Nice to see a very clear video accompanied by very clear instructions - thanks from the uk!
He makes it look so easy thanks for the info!
ChrisFix Great video!! At this point I'm just watching your videos on how to fix things I don't need fixed. Thank you, hope to see more of your quality work!
thanks Raul. I'm glad you are learning a lot. Now if you have a problem then you will know what what to do!
"So now, I'm just gonna, pry that out- ow!"
😂
Would be awesome to see a video on how weightloss in a car would effect mpg, there are a lot of videos on how much performance u gain but i wanna improve my mpg and wondering if replaceing the seats wheels exhaust with lighter versions will make a noticable difference
Chris you make it seem easy like I can do this! Thank you man. I appreciate you.
Thank you so much for this video I was lookin at shelling out 300 or more to a mechanic because I had never had to replace these, I was wondering if you had to disconnect anything like wires or hoses before jacking the transmission and/or engine up?
good point on not jacking up on oil pans... they will cave in and can destroy seals.
got it
So where do I jack engine from bottom so I can take weight off the mounts to loosen bolts 🤦🏾♂️
Good job on these videos. Very informative and easy delivery.👍🏻
Thanks for the video man! I just brought a 2001 Hyundai Santa Fe to Costa Rica and it had been vibrating and knocking like crazy especially when the tranny is in D. The mechanic jacked it up and it was exactly the same thing. I enjoy your videos very much.
Scott Cabrera Glad the video was helpful Scott!
very educational video. I love it. Everyday I learn something from u. Thanks you very much!
Thanks and perfect! Glad it is educational! Love hearing this!
First of all Chris, thank you SO much for your videos! You have no idea how much they have helped me! But was wondering if I could ask you a general question? What would make my 2011 Lexus is250 “wander” on the highway? Almost like it’s being blown side to side by the wind? I have replaced everything I can think of and nothing is helping! I thought if anybody knew, it would be you! Thanks again for lending us your skills and knowledge!
Clear, voice, tools, actual binds and fixes. Great communication!
Thanks Ed! I try to do that with all of my videos!
Don't need to change out a motor mount. But, I enjoy your videos, they've been very helpful. Thanks for sharing.
love this channel, subscribed right away. i2012 nissan sentra SR, ive had multiple repairs with my car, last mount to do is the transmission mount i suppose because i am still having this exact problem. i also have a brake problem now, looks like it could be the rotors because of the steering wheel vibration is severe now when braking, im just hoping it is anything worse like an axle or something. the fun never stops ....
Watching his new videos, compared to this older one, his camera style and presentation styles are similar, but quite different at the same time. His enthusiasm is way higher in his newer videos too. But great work. I have to replace the motor mounts in my wife's VW Routan. This should help.
Thanks!
Filmed, explained, and demonstrated perfectly! Thank you!
Thanks! Glad the video was helpful!
As usual wonderful work MR FIX
Awesome video. I had a question for the upper bolt on the transmission mount? what would be the correct tool? to use for torquing to specs instead of just winging it tight? I did notice it would be very tough to put a socket in place on that top mount for twurking 😎 Thank you Chris 👍
Great video. Chris how would you remove a bolt that just spins? My upper mount bolt in the cavity of car has a nutset that came loose. Thank you
Love your videos man, have done some repairs following your videos. Just one thing...your normally a lot more enthusiastic in your videos, that's one thing i love about your videos... hope you come back to your normal self
you are a very good mechanic I am 56 years old but don't know a lot about cars you make it look so easy.
That was an excellent instructional video. Clear, concise without a bunch of needless (the ow! was definitely needed!) chatter.
Glad it was helpful!
Damn you make things look easy. I hope I have this much ease with my Taurus
Excellent video. Thanks for producing it. And I love the double open end wrench tip.
Joe D Thanks! Glad you learned something new!
a well-edited video !! very good instruction.
oh my god you already have made a video on this...thank god
CatlinCustoms Yep. I have three. A transmission mount replacement (this one), a motor mount replacement: czcams.com/video/33k3vL-j68Ya/video.htmlnd a video on how to tell if your motor mounts are bad.
+ChrisFix Thank you, sorry to bother, i am new, but how can transmission move up, is it not bolted to the frame?
No man its just bolted to the engine
CatlinCustoms Oi
CatlinCustoms
Love that you torque everything and you don't drive in all your nuts and bolts with an impact wrench. Those things save time but they put too much pressure on the nuts and bolts.
Thanks! It also makes it impossible to get off if when you tighten them with an impact wrench!
If you over-torque them then yeah, that's why I specifically bought an impact wrench with multiple settings so that I could use it to remove bolts and drive them back in but drive in just enough that the torque wrench is used to finish the job. I've also found that I've less likely to break the head off a bolt with the impact wrench than with a breaker bar, never broken one with the impact driver and if I'm worried just start on the lowest setting and work up until it finally starts turning.
This was my next job,had a bad feeling about it but not now,thanks as always.
Great stuff.Very Well Explained.Edified !
It seems like every time I have a problem i think to myself “did chrisfix make a video on this?” And of course Chrisfix saves my butt again. Thanks Chris
great vid when that transmission mount came off tho made me LoL xD
Great Video! You provided very clear information and I feel more confident about attempting to tackle this challenge.
Eric Cross Thanks Eric! Glad the video was helpful and made you more confident in fixing the problem! Let me know how it goes! New automotive 'how to' videos every Thursday and most Mondays so stay tuned!
Best channel ever. Thx
Thanks man this helps a lot 👍
Thank you for your video but I have a question will this fix be the same for a Ford Fusion 07? Or do you have any videos
Chrisfix for President👍🏽🇺🇸
Just awesome i don't have the same car but this help so much!!! Thank you !!!
very useful video thank you Chris 👍
It would be cool if you made a video on how to maintain your tools. Like the floor jack you got.
Hey chrisfix must a pain working on cars with all this rain we've been gettin, we feel like a washing machine here in New England wash, rinse, repeat lol keep up the great work.
yo, you re vids are the bomb diggy, most of these jobs I thought had to be done in a garage, you're just out there chillin makin engineers look bad...love this stuff duude
Glad the videos are helpful!
😂 you can tell he's more enthusiastic in the newer videos but the videos are still amazingly filmed and very informative👌🤘
Hi Chris I'm from Jordanthat was the best video on the internet thanks alot keep it up 👆
This video is so helpful for the engine mount replacement I'll have to do on my truck soon. Thank you very much! One question. At what point did you use the jack stands? I may have just missed it in the video. Thank you!
I have saved £100's because of you Chris, keep up the great work bro!!
thanks for the video. you just helped me fix my 3.8L lincoln. major props.
+scott koepp awesome!
super tip extending wrenches for leverage..real nifty...thanks.
very good work.. you are a teacher
You make awesome videos! Thanks!
Would you suggest putting thread locker on the 2 engine mount bolts + 1 engine mount nut, to prevent them from coming out from excess vibration?
Or should the Engine Mounts + Shock Absorbers prevent any serious vibrations from reaching those bolts?
Also, Love your Videos, they're very informative, keep up the great work!
This is scary to even think of doing at home!! Well done!
I still think its Kevin Bacon doing these videos. LOL Chris your the man.
Lol thanks!
Hey Chris I want to ask what would be the difference between normal bushing or ploythen bushing. What would be better and can it be used for the driftstang
“So now I’m just gonna... pry that out, Ow!!!” That was the highlight of the video
Burnt the hell out of my hand now i can't service my car. Going through your Vids is getting me excited to get back at it. You da best
Well Done Chrisfix I have been watching almost all of your videos. I find your videos the best than anyone else on CZcams. The video of painting the wheels from project police interceptor helped me and I too painted the wheels on my chevrolet beat (called beat in India and spark in other parts of the world). I would wonder how you could work on the car and make nice videos yourself. And yeah you have a nice set of tools. I'm following your videos!
You make it sooo easy 😆 awesome thanks
yo chrisFIx you a bad ass dude!
Smashing video.
Like the overdubbing for extra points and bits not said at the time :)
Cant really get in with a torque wrench in limited spaces, i dont think it matters chris, as long as you "Make the special face" while tightnng the nut, or for older people "The noise" as well lol.
I make the noise when I break bolts but I usually edit that noise out! Hahaha, thanks bud!
very nice. Great video.
Chris I have a 93 Ford Taurus 3.8 L same engine as seen in your video so same procedure?
Well done....this is simple way of replacing...
Any more videos featuring your '96 Corvette would be greatly appreciated. Too bad it's a daily driver. You could probably do an entire series on C4 corvette repair and easily have a gazillion eyes glued to your videos (well a gazillion more I should say). Thanks for all the information you've provided to date. TCOY! Happy Thanksgiving!
Very good video sir 👍
Hey Chris, awesome videos you have there.
Can you please do a video on torque dampers?? Very curious about your opinion. Cheers..!
Thank you this helps a lot
this guys a genius i live your channel haha ❤
great video Chris
I have a 2003 Honda Accord V6 and It has two transmission mounts at the bottom of the driver side that are both a very tight fit. Damn Honda's usually have a lil room to work with lol. I got some useful information from this video. I'll be doing the work possibly tomorrow. I can't find any how to videos for my car either.
This was helpful. I am about to start this myself. Probably won't finish in ten minutes though..... Thanks!
+Bryan Barnash glad the video was helpful
This is exactly why I love CZcams. I googled how to change motor mounts, and it brought me to this video. I have a silver 1997 Ford Windstar that is silver, a carbon-copy of the one in this video except for the rims. I am looking to sell mine but I have a few issues (one being the motor mounts), the others are the rear AC fan seems unbalanced (makes a loud humming sound), the drivers door glass rattles when you shut it (probably a plastic clip or something), and the speedometer fluctuates. ChrisFix What's your opinion of the speedometer and the rear AC fan?
***** Great! Glad the video was heplful! The AC fan probably has debris in it which is why it hums. That is an easy fix and I am publishing a video on that next week. It is on my other ford, but it will be the same idea. The speedometer can be a bad sensor or a bad gauge.
How high can the engine be lifted? How do I know when to stop jacking
Pac 84 you want to lift it minimally. Just lift it to where you can get the mount off. You don’t want to break any wires or hoses or anything that’s attached to the engine and frame by lifting it too much. Hope this helps
@Bruce Lee he says that in the video
@Anonymous Anonymous so jack the engine up as lil as possible I’m not changing mounts I jus need to loosen it a lil to get the starter out
Excellent video, thank you so much!! +++
Thanks Chris! What are your thoughts on aftermarket mounts?
could bad mounts effect the shifting of your trans? my car seems to struggle to get into 3rd gear and today looking at the engine i noticed the engine moves a lot. it is a malibu maxx, i am also having trouble finding the diagrams for the mount locations.
Have you ever taken the dash apart on this van? I have to replace blend door. I have seen videos where the cut the dash to get to the blend door. I am not sold on that idea yet. I am considering removing the dash and replacing heater core and blend door. I also have some vacuum leaks. I found that some of the plastic vacuum lines broke near the back of the air intake. Do you know where I can get a print out of where / what systems those vacuum lines go to?