How I built an ELECTRIC SUPERMOTO // Razor MX650 Upgrade
Vložit
- čas přidán 24. 06. 2024
- This is how I converted my Razor MX650 into a mini electric super moto.
My last video explains this build • How I built a 45 MPH e...
In this video, I switch out the dirt wheels for super moto street wheels from the RSF650.
I got my Razor power upgrade kit here:
www.electroandcompany.com/?re... ► shop ► kits ► E&C Ultimate 5000w Razor Kit
5% off the GPS DISPLAY w/ code ✅ "SURRONSTER" ✅ www.cycplus.com/?ref=0gj34qAK
Get the stock Razor MX650 here: www.amazon.com/Razor-MX650-Ro...
You can also use a red MX500: www.amazon.com/Razor-MX500-Ro...
Razor Upgrade Kit includes:
E&C MY1020 Motor
200 phase amp Kelly Controller
EMX lite Throttle with ECO mode switch
Handlebar-mounted power switch
True MX Grips
Wire Harness
Battery Leads
EMX Pre Tune Service
Direct fit:
Razor MX500
Razor MX650 *bike in this video*
Razor SX500
Razor RSF650
Optional Selections:
-48v Lite Pack 13ah Li-ion Battery capable of 75amp bursts with built in battery management and Charger included. (Fits in stock tray, top tray tube needs to be removed)
-48v 20ah Li-ion Battery capable of 100amp bursts with built in battery management and Charger included. (Fits in stock tray, no modification required)
-72v 20ah Li-ion Battery capable of 100amp bursts with built in battery management and Charger included. (Fits in stock tray, top tray tube needs to be removed OR battery tray Hammered Flat)
Important Stats:
48v Lite top speed 25-30mph (35+ with 14t front sprocket)
48v Lite Ride Time: 1-2 Hours wheels rolling on average
48v top speed 25-30mph (35+ with 14t front sprocket)
48v Ride Time: 1.5-3 Hours wheels rolling on average
72v top speed 35-40mph (45+ with 14t front sprocket)
72v Ride Time: 2-4 Hours wheels rolling on average
Lithium 48v or higher required!
0:00 Intro
0:54 Strip
1:49 Conversion
3:50 Test Ride
Theme Song: @Kyle The Hooligan
key words: fastest best faster upgrade mod razor razer mx dirt bike pit mini moto electric emoto emx epitbike edirtbike test review tutorial unboxing how to minimoto supermoto esupermoto street wheelie stunt bike - Auta a dopravní prostředky
Dude! 3M scuff paste with a gray scotchbrite pad and some soap and water. scuff the hell out of the plastic before painting and your results will be way better. Just a pro tip for painting plastics. I like Krylon Plastic paint to finish.
This ^ !
Yeaup 80% of the job is the prep
I guess if you already have sandpaper there must be some grit that will do the job ? probably on the rougher side
3m is the shit!
Bro you should make your own shop of bikes upgrade them and ship them I will definitely buy one!!! 😎
But it’s more fun todo it yourself!
The hoonigan of e-bikes 😂
He basically does
Same
One of my favorite channels on CZcams and the best intro song
Imagine if razer sold just the frame and off-road/road tires as a package and you could get whatever size batter and motor you wanted. They could make a killing off of people wanting to build their own E mini-motos for cheap.
Just buy one second hand for couple hundred bucks. Would be nice though if they sold a roller option.
Tighten rotor with star pattern,
Scuff the plastic with higher grit sand paper before painting,
I think you’ll get better results with a more centered rotor, and the paint will adhere better to the plastic after being scuffed.
Love your videos bro, I have been building my own SX 500 for a little while keep up the good work
I knew someone was gonna beat me with that tip. Lol. Also good for wheel lugs.
yeah ngl it was cringey seeing him not do that... sorta of a basic you learn.
Or just use a primer..
Isaiah 41:10 (NIV)
"So do not fear, for I am with you; do not be dismayed, for I am your God. I will strengthen you and help you; I will uphold you with my righteous right hand."
Tbh you should but I’ve never had a problem with not
Great content my man keep it up and all these build tutorials have helped me a lot.
I don't know what I would do without sur ronster by far my favorite guy
couldnt do it without you thanks for staying tuned bro
@@SurRonster what is the range I really want to get one
With a 52v
@@SurRonster where do you get your bikes from??
Sur Ronster You Spray Painted The Sur Ron Black ? It Was Iconic !! Red Sur Ron Made Your Bike Stand Out In Of The Crowd ..
Already comfortable on the razor. great build
Got my electro kit comin in the mail! Thanks for the inspiration man, I’m thinkin of making my own videos :)
Do it bro, I’ll watch rhem
Make videos bro it kind expensive for that electro kit but would be really dope
Got the kit and rsf 650 going to cerakote the frame. Ordered mine on the 8th.
@@Suprafly954 make a quick video when you’re putting it together
Do it! We need more electric moto CZcamsrs especially Diy's!
god this channel is just the best ad for Razor. Ive never wanted one of their products more.
i've been waiting for this video!!!
Excellent upgrade Dude!!!Fantastic Video!!
What sprocket do you run?
Yo it was good to meet you man. Thanks for that spot light with my crap wheelie. I'm much better at them now. Hope to get another ride with you soon!
ayy see you next time!
Awesome episode. Greetings from Poland
This t-t-thing is really c-c-c-cool!!!!
Also taller tires like the ones your put onto the 650 in this video make the top end speed go up. I did a whole project w top speed and changing my rear tire size from 12 to 16 inches
I'm getting a Surron thank you for your inspiring videos
Awww such a cute second 😭💜 @10:21
I know what am saving my money up for. Thanks 😊 great content.
Isaiah 41:10 (NIV)
"So do not fear, for I am with you; do not be dismayed, for I am your God. I will strengthen you and help you; I will uphold you with my righteous right hand."
Sick! Im planning on building one for myself
Its expensive stuff tho
I like that your couch is also your workbench 😂 very DIY...
This helped alot I was gonna buy a Surron but know I’m jus use the kit on my razor mx 650 thanks for the help !
Bro I love every video from you I'm dingalinging that bell!!!
Awesome build vid so I brought all these thumbs ups 👍👍👍👍👍👍👍👍👍🔥🚀
im saving up to build one of these this is so helpful!
Hey im a big fan from the uk i used to what ur videos when i was 11 i found you again currently im 12 but im turning 13 soon love the vids keep up the great work!
I love the videos with building things
MUCH LOVE FROM NEPAL❤💫
I recommend removing or cutting the back plastic and replace the seat! Replacing mine along with the handle bars, possibly new pegs🙂
Dude i loved this vid ive wached this over like tons
thank you!! put a lot of work into this one
Do a video for those who can only afford one bike, should I get a full sized bike or a small pit bike. I just want to go blasting both on the street and on trails with my gf. I can see the cons from your trail riding, but I also don't think i'm going to go nuts on trail or really deal with hardcore offroad trails anyways, thus I'm really looking at the pit bike conversion as both great to save on space but also a fun little toy to jump on
Great video. I want to build a supermoto also but dont want to do it because the front brake issue but when or if you solve it you should def make a video on how to do it because I also ran into that same issue putting the MX 650 forks on the RSF 650
I was thinking of a next dirt bike for my kid and I'm definitely considering this full setup rather than a pw 50. We have a little razor 125 now
I love your video i look at all of your CZcams video every day
Super cool! I’m trying to mod an mx350 but I had to brushless because of the small size
You might want to repaint those plastics, there’s tons of yt tutorials on how to do a good rattle can job. It’s such a clean build other than the paint
I did a gas conversion on one of these that I got for 60$ off of a cop on offer up where I’m from hahah. This makes me want to rebuild another one but go all out in the electric build!!!
He makes it look so easy
Love the channel, great content
Great Ride
Love the razor content
dude living one of my dreams for me
Love it 🤤
Just try to watch you very interested keep up the great work got yourself another subscriber👏
The notifications are on!
Nice video. I am thinking about upgrading my MX650 stock tires to street tires and stumbled upon your vid. I am curious. How would you recommend for someone to learn to wheelie on this? I've never learned to wheelie but now I want to learn on my MX650, 3000w 60v with 13T Front Sprocket. Thanks man, great vid!
Damn that looks fun
Good shit this is a great build bro
mans rizzin up mid meet gotta respect it
Deserve at least 1mill subs
So cool
i might try this build
I hope E&C is paying you well or hooking you up with anything you need. After watching this video i have started my own build joined FB groups and have seen you name/ videos brought up a lot. more mini videos please hahaha.
Haha I’m just happy to work with such a dope company I’m not focused on the money. So glad you’re getting into this!!
@@SurRonster I was just being a smart ass. I'm sure they treat you well. Do you happen to have a discount code for the mx650 72v kit from e and c? In one video you say you will have one down in the description section but I couldn't find it.
My sx500 is fully built and I got the same hydro brakes and I got the front to work, plus you can make the heat sink work with the rsf wheels
what’s the heat sink ??
yessir 🔥
Nice Jersey
7:45 😂 how you feeling…..goooood . Looking goood! Lol laugh every time at that
Good shit my guy
Sick🔥🔥
can you make a video of swapping the freewheel to a bmx one? and how it impacts the performance? no one else has made a video of it but ive heard of people doing it and wanna see the difference with the sprocket size.
Looking good !
I can make you a front and rear sprockets in any Teeth size for 420 chain if you want
Bro you should call that thing the yellow jacket or the wasp! And btw it looks sick!
Man you kinda forgot to add the primer as your base coat for the paint. It gives some surface for the actual paint to grab on.
I hope that the paint doesn't come off with all that plastic flexing! It's just a heads-up for in the future, definitely don't pass on this next time. Much love bro ❤
Hi I was looking on building this and got a couple questions. First does it matter if you take the heat sink off and if so what is the effect. Secondly what is the range and lastly where can I get the front rsf wheel it’s sold out on razor please and thank you
can you review and possibly upgrade the viro rides cafe racer
I'm not a BMX fan but I love this guy's videos. Wait what does BMX even stand for?
Literally couldn't imagine being on a bike that small with that much power
I'm waiting to see someone build a full on E-Chopper.
My chest hurt watching you do those bolts on the rotors lol
You should paint the frame too.
does the kit come with the breaks? do you have a link to the tire upgrade you did?
You should open a shop! You would just bring a MX650 and you choose what you want to add and then you have a team of staff and they would do it then they would ship it or you would go and collect it!
Wow this bike is crazy lol I wish I could just pay you to build me one like this
About 2600 bucks
One can be built for $700-$800
@@alexbekkala1718 not from me lol 😆
7-800 just for battery motor and ESC ,still have to buy Walmart cheap bike so yeah about 2600$
Dude I love you so much super sick and I want one of those bikes there so sick I wish I could afford one
I'm paying a talaria sting of I'm broke and only get money from photography lol so gonna take me 6 months to pay it of but going to be worth it lol 😆
the surron is cheaper🤧
I just went and looked at your lightening shots . Super impressive & cool 👍
@@mrshaneyt4356 hey thanks heaps mate 👍 I really enjoy photography it's all I do I've just started doing lightning now thanks again mate
build a mototec 1000w pit bike. you will love
what did you use to get the wheels to fit?
You should post more of the mx 650 and do more upgrades
sick. which one do you like better? rsf650 or this one, mx650?
I’m getting this kit and bike
Hey I hope you answer this did you make the fastest razor or did you buy it like that because I really want one of them please answer let me know as soon as possible please I love your videos they are the best
i love himmmmm🥰💖😍
Are u still running the #25 chain or did u go with a thicker one?
sur ronster where did you get those batteries in the description
can we see like a acceleration video on the bike now with these tires/ top speed.
Incrediblè
🔥🤟
Where did you get the upgraded off road wheel set
What do you recommend for a Adult 5'8" 170lbs?
And whats the difference between the RSF650 AND MX650, SX500?
I'm looking to buy and not sure because the mx is 100 dollars cheaper.
What ever I buy I will be Modding
To make it even better you should add led lights
Sur Ronster check out my mototec build i just got my 72v 24ah battery from electro&co and im about to make a video ive been rocking electro&co's kit for a couple months now, love their stuff 👌 maybe youll be inspired to build your own 🤘
What charger are you using for the battery?
nice 😎
Each +1" tire = +3mph speed.
Looks fun but all in isn't this bike+kit like 4-5 grand?
Hey buddy I want to change the throttle on my bike don’t know which one should I get any suggestions I was thinking about Domino throttle or the Maura throttle
nice vid
Would a domino throttle work with the razor E&C kit
If you paint the yellow on the frame to black or white it will look better
Is this the 5000W kit or 6000W kit? Did you get the motor heat sink or without? Where can you get those wheels? They are not on razers website?