ARROWS Hobby MIG-29 Fulcrum 64MM Landing Gear MOD By: RCINFORMER
Vložit
- čas přidán 27. 08. 2024
- Get the ULTIMATE MiG-29 at HOBBYZONE Here► bit.ly/3fG6r6N
HOBBYZONE MAIN PAGE► bit.ly/2XGEPa9
LIPO PACKS USED IN THIS REVIEW:
-22.2V 3200mAh 6S 30C Smart IC5 LiPo ► bit.ly/2CuocrL
-22.2V 4000mAh 6S 50C Smart IC5 LiPo ► bit.ly/3fS158J
▼Get your SPEKTRUM Smart Charging components here▼
▼SMART CHARGERS USED FOR THIS REVIEW▼
-Smart 30A 540W Power Supply► bit.ly/2OKJ8gw
-Smart S1200 DC Charger, 1x200W► bit.ly/2D09lVC
-S1500 DC Smart Charger, 1x500W► bit.ly/3jzdoJl
▼RECOMMENDED A/C SMART CHARGERS▼
-S2100 Smart DUAL AC charger► bit.ly/2ONp7WD
-S1100 Smart SINGLE AC charger► bit.ly/3hvf1pU
▼SPEKTRUM SMART BATTERY CHECKER USED IN ALL MY VIDEOS▼
bit.ly/3hrmIx3
-DX9 Black 9-Channel DSMX Transmitter► bit.ly/3fwNaos
▼HELP SUPPORT THIS CHANNEL BY USING OUR LINKS TO PURCHASE▼
.... Special thanks if you were able to order it thru my Affiliate links here.... that is greatly appreciated! ... At no additional cost to you, Purchasing thru our affiliate links and Amazon Store supports RCINFORMER as we do earn a small fee for the referral. Thank You for supporting us!
▼Please visit my new AMAZON Store for ONLY the Exclusive stuff that I use Here▼
www.amazon.com...
RCINFORMER on FACEBOOK► / rcinformer
www.RCINFORMER...
Follow Rich at RCINFORMER on Social Media
FACEBOOK► / rcinformer
INSTAGRAM► / rcinformer_official
TWITTER► / rcinformero
Website► www.RCINFORMER...
You're a legend, Rich. I just got one of these secondhand and needed to do these mods. The guy that had it did try to rectify the "nose down" attitude, but he wasn't very successful. You explained it beautifully and it's been extremely helpful. Thanks heaps dude, this is invaluable information for this airplane. Big thumbs up from me. 👍👍😊
Thanks for the great comment! I'm always putting in maximum effort to make things work better for everyone! glad it helped:) Mine rotates Beautifuly!
This modification is very helpful. I have seen two MIG29 failed to takeoff and ran into grass at the end of run way. Thank you very much.
This is stupendous!!🤣😂. The mod is definitely needed for smooth rotation on take off and hitting the mains first on landings. I hope that Pilot Ryan does it to his as well(all of it I mean). In the groove 'n smooth is always the right move!😉😉 AirHammer out!!
How beautiful these retracts are at close up.....niceeee.
Your changes will be the first I’m gonna do to my plane, even before assembled. Presumably the gear can stay in the fuselage without the rudder and wings attached. Thanks man 🙏 great video !!
Nice work on the retract mod. Im so glad you did the vid Rich. Awesome.
👊👊👊👍👍🇬🇧
Thanks for putting this one out. Always nice to have the extra info and choices.
This is a awesome jet! I love this jet including the way it takes off and lands with just a simple 1/4 spacer mod. I picked up from home Depot for next to nothing to bring the nose up on mine and it did the trick. As I mentioned in one of your other videos this much work isn't needed in all models. With that said great video for those that will need to do all this to make it work..
WE USED TO DO THAT ON OUR 'FRONTS' ON HONDA ASTREA/MONKEY AND GLX 100/115cc FROM 15 TO 19yo(I'LL BE 37 AT JULY) BEFORE MY 20th I BOUGHT H. CRM 250cc GREAT MEMORIES!! NICE PLANE NICE VID. NICE DAY CAPTAIN! ! !
Good stuff!!! Will for sure be doing this when mine shows!!
Good job Rich. Thanks.
The wheel wells look like they need to be reamed out a little bit, cause after you shorten the back landing gear by 5mm the wheels don't fit into the wheel wells correctly. They look like they aren't seated flat.
The main gear do tend to snag a bit on that corner, especially if you cut the strut to short. I cut mine right to the limit. If you file down that corner, the wheel goes in fine. remember there is vibration, buffeting from wind & play in the strut mechanism that keep it from getting caught up in the well. Mine is working fine.... If you want, you can probably remove less, lets say 4mm from the main gear and the tire will be less likely to touch any part of the wheel well:)
thank you !!
Awesome video
Did you take the strut pins out from the main gear to cut them down or did you cut them while they were in the plane ?
Wouldn't it work if you place the cut off parts from main landing gear and use them on the nose gear?
That's not a bad idea! that would probably work OK:)
Great video! I will definitely have to do this MOD for sure. I notice you use a blue block of some sort on your nose gear when it's sitting on the table. I am assuming this is so the plane does not roll off the table. What is this? I am also looking for something to help keep my planes on the workbench. Thanks!
It was just a wheel chock that I bought at the local hobby shop many years ago.
What diameter collar and carbon tube?
Any that fits. the collar was 6mm thick. The carbon tube can be a wood dowel or anything that fits in the tube.
What about changing the front wheel with a bigger diameter?
And cutting a bit of foam on the wheel compartment.
I didn’t see you flying this plane anymore
Not what you said
Way to much work. Don't have the time. Hopefully they will make changes on v2 then I'll pull the trigger
These are easy mods!
Stuff like this is why I don't own any Arrows planes. It seems there is always some major deficiency in otherwise good designs. Its a shame...