ARROWS Hobby MIG-29 Fulcrum 64MM 2nd Flight on SPEKTRUM 4000 lipo By: RCINFORMER
Vložit
- čas přidán 27. 08. 2024
- Get the ULTIMATE MiG-29 at HOBBYZONE Here► bit.ly/3fG6r6N
HOBBYZONE MAIN PAGE► bit.ly/2XGEPa9
LIPO PACKS USED IN THIS REVIEW:
-22.2V 3200mAh 6S 30C Smart IC5 LiPo ► bit.ly/2CuocrL
-22.2V 4000mAh 6S 50C Smart IC5 LiPo ► bit.ly/3fS158J
▼Get your SPEKTRUM Smart Charging components here▼
▼SMART CHARGERS USED FOR THIS REVIEW▼
-Smart 30A 540W Power Supply► bit.ly/2OKJ8gw
-Smart S1200 DC Charger, 1x200W► bit.ly/2D09lVC
-S1500 DC Smart Charger, 1x500W► bit.ly/3jzdoJl
▼RECOMMENDED A/C SMART CHARGERS▼
-S2100 Smart DUAL AC charger► bit.ly/2ONp7WD
-S1100 Smart SINGLE AC charger► bit.ly/3hvf1pU
▼SPEKTRUM SMART BATTERY CHECKER USED IN ALL MY VIDEOS▼
bit.ly/3hrmIx3
-DX9 Black 9-Channel DSMX Transmitter► bit.ly/3fwNaos
▼HELP SUPPORT THIS CHANNEL BY USING OUR LINKS TO PURCHASE▼
.... Special thanks if you were able to order it thru my Affiliate links here.... that is greatly appreciated! ... At no additional cost to you, Purchasing thru our affiliate links and Amazon Store supports RCINFORMER as we do earn a small fee for the referral. Thank You for supporting us!
▼Please visit my new AMAZON Store for ONLY the Exclusive stuff that I use Here▼
www.amazon.com...
RCINFORMER on FACEBOOK► / rcinformer
www.RCINFORMER...
Follow Rich at RCINFORMER on Social Media
FACEBOOK► / rcinformer
INSTAGRAM► / rcinformer_official
TWITTER► / rcinformero
Website► www.RCINFORMER...
One tip about this MiG we noticed at Jet Jam. The exhaust nozzles are very thin plastic. Any exposure to direct sunlight / UV for even a short period of time (30 minutes will do it) will cause the plastic nozzles to start deforming and warping. The plane is awesome other than that and would be a great candidate for some 3D Printed exhaust nozzles.
Great tip thanks!
Yes do the gear mod video
Very impressive aerodynamics, and the sound is sweet!
6S 4 AMPS A TON OF THRUST AND THE FLYING CHARACTERISTICS ARE GREAT AND A BIT MORE STABLE ......THAT'S EXACTLY WHAT I HAD IN MY MIND C.RICH, AND HAVE A NICE DAY!!!!
Hi Rich,
The flight was about 4 1/2 minutes. You sure make it look easy. Stay safe.
Another smashing video Rich , i clocked you , just over 4 mins of flight time.....Awesome...👊👊👊👍🇬🇧
Just as soon as I get the burners in there I will let you know! The outrunners are not gonna work for me though.... have a custom Inrunner set up going in mine.... nice flight and this plane looks to be a blast!!!
Ty4sharing !! Awesome!! You make it look easy, at full throttle rich.. j.c.!!
Please do the gear modification video. Thank you very much.
Landings 'n all, the second flight, takes offs to, was better than the first!!!
RICH! your flying skills are awesome
Nicely done as always and updated your landing currency on one pass. Excellent use of company assets. I would also like to see more on your gear mod. Thanks!
The 1st bounce was unintentional... lol... But I quickly decided to turn it into a currency maneuver Because the control of the flare is so predictable now:)
Hi Rich, thanks for the video. At the end you were discussing the elevator, and using book call outs. I’m not seeing any flap to elevator mix in the book, did you find that it needs any? Or does it behave well with the flaps deployed and no mix? Trying to get my maiden done today or tomorrow. Great looking plane!
Watch first vid of this . He showed flaps.. no mix ..
Thanks Mojo, will check that out
I used no mixing at all... I was really surprised that it needed none but it was very well behaved and there was little to no pitch change when flaps were extended:)
Nice, thanks for the info
Sweet looking plane really want to try this one eventually looks like it’s a fantastic flyer. These new jets lately are just outstanding as you would say haha 🤣 great flying as always rich
Sweet demo Rich 👍
Yes, please make the landing gear mod video!
I got it rendering now!
gear video please !! and there wont be an after burner for this from gooniac's, i talked to him and since its an outrunner he wont be making any for this.got mine from the light burner
Mine should come in soon. I’m curious on how you did execute the retracts mods. Hopefully we see a video of that!
Thanksss... Nice flying this beauty
I just filmed the video and I will post it soon
RCINFORMER
I will do your mods prior to it’s maiden because the landing strip is a grass field. Thanks!
Man I can’t wait to receive it, so many beautiful details on this plane.
Looking on RCG people flying there with 90 to 100cg marks .
Mine flies fine at 90.... However it has greater stability at about 80.... It just depends on how you want to fly it. The flyable CG range Is probably a 30 to 40mm envelope... I have found that 80mm provides rock solid stability and requires no flight stabilizer for great control.
Hello sir, i saw on Arrow's website stating that this jet can fly with 6s 3300mah to 5000mah.
Is it really possible for 5000mah 6s?
Yes, if you have one that fits. I reccomend 4000
Whoa! These are £400 + in the UK : /