ARROWS Hobby MIG-29 Fulcrum 64MM Assembly guide & Tips By: RCINFORMER
Vložit
- čas přidán 27. 08. 2024
- Get the ULTIMATE MiG-29 at HOBBYZONE Here► bit.ly/3fG6r6N
HOBBYZONE MAIN PAGE► bit.ly/2XGEPa9
LIPO PACKS USED IN THIS REVIEW:
-22.2V 3200mAh 6S 30C Smart IC5 LiPo ► bit.ly/2CuocrL
-22.2V 4000mAh 6S 50C Smart IC5 LiPo ► bit.ly/3fS158J
▼Get your SPEKTRUM Smart Charging components here▼
▼SMART CHARGERS USED FOR THIS REVIEW▼
-Smart 30A 540W Power Supply► bit.ly/2OKJ8gw
-Smart S1200 DC Charger, 1x200W► bit.ly/2D09lVC
-S1500 DC Smart Charger, 1x500W► bit.ly/3jzdoJl
▼RECOMMENDED A/C SMART CHARGERS▼
-S2100 Smart DUAL AC charger► bit.ly/2ONp7WD
-S1100 Smart SINGLE AC charger► bit.ly/3hvf1pU
▼SPEKTRUM SMART BATTERY CHECKER USED IN ALL MY VIDEOS▼
bit.ly/3hrmIx3
-DX9 Black 9-Channel DSMX Transmitter► bit.ly/3fwNaos
▼HELP SUPPORT THIS CHANNEL BY USING OUR LINKS TO PURCHASE▼
.... Special thanks if you were able to order it thru my Affiliate links here.... that is greatly appreciated! ... At no additional cost to you, Purchasing thru our affiliate links and Amazon Store supports RCINFORMER as we do earn a small fee for the referral. Thank You for supporting us!
▼Please visit my new AMAZON Store for ONLY the Exclusive stuff that I use Here▼
www.amazon.com...
RCINFORMER on FACEBOOK► / rcinformer
www.RCINFORMER...
Follow Rich at RCINFORMER on Social Media
FACEBOOK► / rcinformer
INSTAGRAM► / rcinformer_official
TWITTER► / rcinformero
Website► www.RCINFORMER...
Great video as always, love the tip about using tape to remove paint from surfaces that will be glued?? Can't wait to use that in my next assembly.
Yes sir..this bird is awesome.. nice to fly..fun to enjoy.. cheers 🍻
Great video Rich!! Awesome tips as always buddy, thanks for sharing 👍🏼👍🏼👊🏼👊🏼👊🏼💥💥🔥
Hi Rich,
The instruction manual does not cover where we sould be measuring the throw of the surfaces from. Could you possibly make a video elaborating on your setup up in terms of measuring the full range of movement of the surfaces. Or just measure for me. I dont know how much is too much or too little.. Thanks
Hi Rich , ive just hit the button for this beautiful Arrow Mig.. i also used your link too. Just let you know , its cheaper to buy it from your site then the uk , believe or not...lol
Thank you for your great vids . Big salute from the uk...👍👍👍👍🇬🇧🇬🇧
Thanks for watching & using my links! Thank you for the support!
Nicely done as always Rich!
You always give the greatest tips to help everyone. I'll check out the maiden's next. A little late watching. AirHammer out!!
great work! very fine Demo !! thnx
Hey rich did you take a look at the landing gear also as I know pilot Ryan was having issues with the plane taking off and had to adjust. I ask because I fly off of grass
I have a fix for it already:) Please check out the next FLIGHT video where I will demonstrate the changes... Please pass it around so others get the info:) I have a good fix that resolves most of the issues taking off.
Yeah iyou can fly it off grass just fine. It has got power enough, but the AOA is all wrong, nose wheel compresses too much on take off, so you do not get a good rotation.
I used a smaller wheel 50mm on all the gears and some ty-wraps to compress the main gear. Those mods gave a good AOA.
Check out this vid:
czcams.com/video/qnItxAPihpg/video.html
I bet Rich comes up with a much better solution.
Did you add 5mm of up elevator at neutral ?
Yes, it's about that:)
How about a little less on the shelf liner and show the receiver (rats nest)installation
Nice!
How long did you work on it???
The vertical stabilizers take about 15 to 30 minutes to put on... The rest of the plain screwed together in minutes:)
Is this jet grass capable?
Probably I'm planning on going out to do a demo with it
Sure it can! Check out this vid!
czcams.com/video/qnItxAPihpg/video.html
You do have to get a good AOA. Rich will explain ;-)
@@flyyourtomcat Big thank you for ur video , ive just ordered one from the USA...👍👍👍🇬🇧