6.4L Powerstroke Fan Clutch Replacement! [[ 2008 Ford F-350]]

Sdílet
Vložit
  • čas přidán 25. 08. 2024
  • Watch as I show you how I removed and replaced my cooling fan clutch. I show you all the tools I used as well as techniques.

Komentáře • 18

  • @tucobenedicto1780
    @tucobenedicto1780 Před 2 lety +3

    You make a good video. Plenty of helpful narration. The only thing that might make it better would not to be in extreme closeup so much because it's difficult to see what you're doing. Thanks for helping everyone (and me) out.

    • @FishHuntCookTinker
      @FishHuntCookTinker  Před 2 lety

      Thank you for commenting and letting me know your thoughts. I appreciate all the advice I can get. Thanks for watching!

  • @ZHPBrent
    @ZHPBrent Před 3 lety +2

    Thanks this helped me a ton!👍🔥

  • @CrankyCronos
    @CrankyCronos Před 2 lety +1

    Some delete the (PIA) EGR. Slap a tuner on it to "tune out the EPA" stuff. Never looked back. Illegal but worth the risk according to some.

    • @FishHuntCookTinker
      @FishHuntCookTinker  Před 2 lety

      I have heard it is worth it. Thank you for commenting and watching!

    • @Gramskee
      @Gramskee Před 13 dny

      450 6.4 deleted I'll sell the truck before the egr goes back on, it's so much better and now can actually drive it long distances, along with upgrading the tranny cooler with some bigger once it's deleted cause man do they run.

  • @pourtierbeatz7804
    @pourtierbeatz7804 Před 2 lety +1

    Whats the size of the nut

  • @jessemoore4904
    @jessemoore4904 Před 4 lety +1

    Very good video.. was your clutch going out all the time or was Intermittent Because I think that's what's wrong with mine but it only does it once in a Blue Moon

    • @FishHuntCookTinker
      @FishHuntCookTinker  Před 4 lety

      Thank you and thanks for watching! It was not often.

    • @theodorecoen2793
      @theodorecoen2793 Před 3 lety

      Pro tip: you can watch series at kaldrostream. I've been using it for watching a lot of movies recently.

    • @ryanernesto5038
      @ryanernesto5038 Před 3 lety

      @Theodore Coen Yup, I have been watching on kaldroStream for months myself :D

  • @1400harley
    @1400harley Před 2 lety

    How long were ya beating on the nut wrench??? I've been hitting mine for 45min...

    • @FishHuntCookTinker
      @FishHuntCookTinker  Před 2 lety +1

      It took me about 20 minutes, but mine had been off a few years ago. Hope you got it!

    • @1400harley
      @1400harley Před 2 lety

      @@FishHuntCookTinker yeah, needed heat and an airhammer and finally got it.... 2hrs total in a crazy heat wave!

  • @GrowthMode209
    @GrowthMode209 Před 2 lety +1

    🔥👌🏾💪🏽

  • @kennyv6135
    @kennyv6135 Před 8 měsíci +1

    Just get to it! Way too much info not about the video

  • @Tom-pn5sk
    @Tom-pn5sk Před 8 měsíci

    😅