How to Replace Fan Clutch 2008-2010 Ford F-250 (6.4L Diesel)
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Electric Fan Clutch from 1AAuto.com 1aau.to/ia/1ARF...
This video shows you how to install a new radiator fan clutch in your 2008-2010 Ford F-250 (6.4L Diesel). The radiator fan clutch relies on a temperature sensitive spring and a viscous fluid to operate effectively. When worn, it could stick and spin too fast, or stay loose and not spin enough. If the fan spins too early, or not enough, you could face too low or too high coolant temperatures, which could be problematic.
This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty
Tools you will need:
• 10mm Socket 1aau.to/oaW3/1A...
• 11mm Socket 1aau.to/obfA/1A...
• 13mm Socket 1aau.to/obfA/1A...
• 8mm Socket 1aau.to/oaW3/1A...
• Fan Clutch Wrench
• 3/8 Inch Impact Gun
• Air Chisel 1aau.to/obf/1AX...
• Ratchet 1aau.to/obqz/1A...
• Socket Extensions 1aau.to/obfA/1A...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
So to remove you have to airhammer it to the right correct?
First person here! Love your videos ❤❤❤
On your video you're pulling that fan off clockwise don't believe me watch the videos
So the fan just spins off??? I'm currently doing the same and call bs
Helpful video except to take it off you said u was spinning it counter clockwise! And to tighten you say the same! Other then that helpful