Excellent advice thank you. Whilst having to rectify a 3" bodged body lift done by a previous owner the bottom half of a radiator cowling had been removed to get the fan blades to clear and this probably compounded matters even further by drawing cold air over the viscous coupling causing the fan to slip instead of getting enough hot air from the radiator to operate the fan clutch correctly. I believe this misalignment eventually led to head gasket failure.
Well, thanks to you, i just replaced my fan clutch and its working beautifully. Came out no problem with the right tools, too! Blessings to you brother. I had it sitting for two years thinking the tranny was slipping
Thanks a lot for this video! This was exactly what was wrong with my truck. The fan was running constantly and made my truck sound like a semi everywhere I went. It was very obnoxious
Thanks brother, you got a solid foundation, and i can tell you got a good heart. keep up the good work. And this video helped btw, justed needed to know if a spinning fan while off was bad...and it seems like it is. Another repair for me! But its all good, gotta replace the ac comp anyway. Cheers!
We had a series of accidents that each resulted in having to replace the fan clutch. One new one seemed just too tight. It always sounded like an airplane and I could feel the extra loading to the engine. I returned it and the new one they gave me was way better. It made noise when first warning up, but after that it was quiet and the engine didn't feel like it was working harder. It was a perfect setup. Unfortunately, there was another accident and that fan clutch had damage and was replaced. The new one was back to being too tight. This one came from another auto parts store. I returned it and the replacement wasn't much better. I asked both stores if there was a particular specification I had to ask for, they said no, just go for an oem fan clutch. I don't have an issue with overheating, it's probably cooling more than needed, especially in winter. I'm about to remove the fan clutch and try driving it to see the difference. On one hand, I am thinking of getting an electric fan and eliminating the fan clutch. This is on a truck, but it's not used for heavy towing or anything like that. I can see having one that would come on more if I was towing something.
i hear the roaring noise, and loss of acceleration, but only when i climb up hills . I have an electric fan clutch and it spins immediately on cold engine starts, and i thought they dont spin until engine gets warm/hot? the clutch it seems is very stiff when engine is off (It turns, but with a some effort). after i start the car and shut it off it appears to freewheel then..do you hink my fan clutch is bad, or possibly something else? Im not getting overheating at all, but i assume thats because the fan spins all the time?
Easy way To know if fan nut is right or left hand . Standing at front of vehicle , Look at your fan blade’s angle direction . If the left side is the side of blade is closer to the radiator than the right . Then that is standard right hand threads, righty tighty ,lefty loosy.
So I've changed everything except the waterpump.. And its still the same . I used to think ( Scotty ) was a God ...oh...if you find one these buy it ! Xterra 05 2 wheel DrIve . Radiator , hoses , thermostat ....same thing...Should I spend more on the water pump ? camshaft sencors is only code that comes up . would that do it ? Or call Scotty and say : boy do I have a deal for you !
Mine 97 4runner makes an extremely loud whirring noise when accelerating and doesn't have the power it should. The engine runs like new and has a rebuilt transmission with about 500 miles on it. The fan doesn't spin free and it doesn't wobble. It won't make the whirring noise if it's in "Park" but does upon acceleration. Do u have any advice?
Clogged or obstructed radiator, inoperative pressure cap, cooling system leak, faulty ECT sensor, worn (or missing) drive belt... could be many causes.
@@Top5AutoRepairs I changed the fan clutch and still nothing. Looks like it’s going to be the compressor. Ive changed everything except the compressor and the evaporator. I doubt it’s the evaporator. Would you happen to know if a aftermarket compressor would work ? Or do I need the oem brand? Thanks in advance.
yes and no. If trans has an oil cooler radiator and it's plumped to engine cooling system then yes it might raise temperature if engine overheats. For older cars it wont make any effect
Excellent advice thank you. Whilst having to rectify a 3" bodged body lift done by a previous owner the bottom half of a radiator cowling had been removed to get the fan blades to clear and this probably compounded matters even further by drawing cold air over the viscous coupling causing the fan to slip instead of getting enough hot air from the radiator to operate the fan clutch correctly. I believe this misalignment eventually led to head gasket failure.
Well, thanks to you, i just replaced my fan clutch and its working beautifully. Came out no problem with the right tools, too! Blessings to you brother. I had it sitting for two years thinking the tranny was slipping
Outstanding video! Just what i needed to troubleshoot my expedition fan clutch. Concise and to the point.
Love the way you hook us up on phonics. Verry well explained👏👏
Thanks a lot for this video! This was exactly what was wrong with my truck. The fan was running constantly and made my truck sound like a semi everywhere I went. It was very obnoxious
Gonna test mine tomorrow. Thanks for the video man
Awesome tips. Another is to tighten in the direction of fan blade slant .blade . Blades slant left tighten left right to loosen
one of the best videos on CZcams.
Thanks that was awesome!!
Thanks brother, you got a solid foundation, and i can tell you got a good heart. keep up the good work. And this video helped btw, justed needed to know if a spinning fan while off was bad...and it seems like it is. Another repair for me! But its all good, gotta replace the ac comp anyway. Cheers!
Good luck... I've replaced everything except the water pump... Might as well change that as well .my repairs have passed what I paid for the car now..
Great information thanks
Great video 👍
We had a series of accidents that each resulted in having to replace the fan clutch.
One new one seemed just too tight. It always sounded like an airplane and I could feel the extra loading to the engine.
I returned it and the new one they gave me was way better.
It made noise when first warning up, but after that it was quiet and the engine didn't feel like it was working harder. It was a perfect setup.
Unfortunately, there was another accident and that fan clutch had damage and was replaced.
The new one was back to being too tight.
This one came from another auto parts store. I returned it and the replacement wasn't much better.
I asked both stores if there was a particular specification I had to ask for, they said no, just go for an oem fan clutch.
I don't have an issue with overheating, it's probably cooling more than needed, especially in winter.
I'm about to remove the fan clutch and try driving it to see the difference.
On one hand, I am thinking of getting an electric fan and eliminating the fan clutch.
This is on a truck, but it's not used for heavy towing or anything like that. I can see having one that would come on more if I was towing something.
you're awesome. thank you
What if the fan keeps constantly going on and off on idle but not overheating especially with the a/c on. I have a Chrysler 300s 5.7
Good info.
i hear the roaring noise, and loss of acceleration, but only when i climb up hills . I have an electric fan clutch and it spins immediately on cold engine starts, and i thought they dont spin until engine gets warm/hot? the clutch it seems is very stiff when engine is off (It turns, but with a some effort). after i start the car and shut it off it appears to freewheel then..do you hink my fan clutch is bad, or possibly something else? Im not getting overheating at all, but i assume thats because the fan spins all the time?
Easy way To know if fan nut is right or left hand . Standing at front of vehicle , Look at your fan blade’s angle direction . If the left side is the side of blade is closer to the radiator than the right . Then that is standard right hand threads, righty tighty ,lefty loosy.
Also, reverse threaded fan clutch nuts have notches on them
That you for the info
Oh ,yeah... The fan clutch too !
thanks
good👍
Great job 👏🏼
Can I ask you a related question?
Sure
So I've changed everything except the waterpump.. And its still the same . I used to think ( Scotty ) was a God ...oh...if you find one these buy it ! Xterra 05 2 wheel DrIve . Radiator , hoses , thermostat ....same thing...Should I spend more on the water pump ? camshaft sencors is only code that comes up . would that do it ? Or call Scotty and say : boy do I have a deal for you !
My fan spins like 1/4 turn and atops when its off lol
Would a bad fan clutch cause alternator to run at 11.5 volts, bmw 325i 2004?
Hi I replace the fan clutch and fan blade on a 05 Colorado but when I drive and I accelerate I hear this jet sound air is this normal?
I added a video of a sound I'm getting after I replaced both fan clutch and blade. Check my video
Yea you just have a heavy duty one that is basically always engaged
Mine 97 4runner makes an extremely loud whirring noise when accelerating and doesn't have the power it should. The engine runs like new and has a rebuilt transmission with about 500 miles on it. The fan doesn't spin free and it doesn't wobble. It won't make the whirring noise if it's in "Park" but does upon acceleration. Do u have any advice?
If all you hear is that whirring noise nonstop while driving, the clutch is locked up.
What if it's always on even from a cold morning start ?
Yes then it's bad and should be replaced
Hi. Thanks brother.
Does the fan spin Clockwise ?
Thanks
It depends on the vehicle. Some clutch is reverse thread.
@@Top5AutoRepairs thank you i tried googling but cant find it.
Its a 95 lexus ls400
Damn I wish you were local!
He will travel to you 1k minimum
What if the engine temperature does not drop while driving above 60 - 70 mph?
Clogged or obstructed radiator, inoperative pressure cap, cooling system leak, faulty ECT sensor, worn (or missing) drive belt... could be many causes.
Will a bad fan clutch affect the cooling of the ac in anyway?
Yes it can.
Condenser won't dissipate heat fast enough.
@@Top5AutoRepairs thank you
@@Top5AutoRepairs I changed the fan clutch and still nothing. Looks like it’s going to be the compressor. Ive changed everything except the compressor and the evaporator. I doubt it’s the evaporator.
Would you happen to know if a aftermarket compressor would work ? Or do I need the oem brand?
Thanks in advance.
Can it cause transmission problems?
yes and no. If trans has an oil cooler radiator and it's plumped to engine cooling system then yes it might raise temperature if engine overheats. For older cars it wont make any effect