Lamborghini Huracán Performante 1/24 | The Inner Nerd
Vložit
- čas přidán 9. 07. 2024
- Aoshima Lamborghini Huracán Performante in 1/24 scale by The Inner Nerd
Time lapse video of the full build, painting and weathering of the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit as shown by The Inner Nerd
Tamiya Ducati 888 Superbike Racer 1/12 Scale
• Tamiya Ducati 888 Supe...
The first part of this video shows the use of Photo Etched parts and scratch building techniques on the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit to detail hydraulic pipes and electrical cables professionally and cheaply around both the cockpit and wheel bays. Locitite 406 CA superglue is used in this process combined with CA superglue accelerator/activator to join the two dissimilar materials. Also used are details from Eduard Brassin which are additional parts to the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit box
The second part shows the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit surface preparation techniques such as filling panel gaps and seams with Deluxe Materials Perfect Plastic Putty modelling filler/putty and sanding them smooth to get a seamless join between parts using a range of sand papers from 800, 1200, 2000, and 3000p dpi grit papers. Also Black Basing techniques are included in this section using Mr Hobby "Mr Surfacer 1000, 1200 & 1500 Finishing Surfacer" thinned with Mr Hobby Self Levelling Thinner 400 to prime the surface ready for painting, sprayed through an airbrush using Harder & Steenbeck Evolution Silverline Solo Needle/Nozzle: 0.15mm with Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar).
The third part of the video demonstrates the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit using the BLACK-BASING technique to achieve a pre-weathered look and surface texture replicating that of an aged and worn aircraft. Harder & Steenbeck Evolution Silverline is used with Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar). Also included in this section on the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit is the Engine Exhaust painting using Alclad 2 Lacquers (Airframe Aluminium, Aluminium, Steel, Jet Exhaust, Copper & Pale Burnt Metal) and Tamiya clear paints to create a burnt metal effect. 3 layers of Mr Color GX100 Superclear III thinned with Mr Hobby Self Levelling Thinner 400 seal the decals in. This can be decanted and sprayed through an airbrush such as the Harder & Steenbeck Evolution Silverline Solo.
Decals for the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit follow painting with the aid of Mr Hobby Mr Mark Setter & Softer products. These products allow the decal to form to the shapes of the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit panel lines and surface which you can see in the video.
Next is the weathering of the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit. This is started using Abteilung 502 & Winsor & Newton oil paints thinned with white spirit to a wash consistency. Then used as a panel line wash the oil is applied across the Aoshima Lamborghini Huracán Performante in 1/24 scale model kit to achieve a dirty, grimey & worn look. Further weathering including Unthinned Abteilung 502 Oil Paints to create streaking and water marks, along with AK Interactive weathering Pigments (Gun Metal, Russian Earth, Europe Earth, Medium Rust and Pigment Fixer, Worn Effects, Dark Streaking Grime Rainmark Effects) concludes weathering.
Items Used
Airbrush: Harder & Steenbeck Evolution Silverline Solo Needle/Nozzle: 0.15mm Compressor: Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar) Paint: Mr Hobby Mr Surfacer 1000, Mr Hobby Mr Surfacer 1200 & Mr Hobby Mr Finishing Surfacer 1500 thinned with cellulose lacquer thinner Tamiya Acrylics thinned with Tamiya X-20A Thinner Mr Hobby Aqueous Abteilung 502 Oils - Black / Industrial Earth / Olive Green Winsor & Newton Oils - Yellow Ochre / Raw Umber / Burnt Sienna / White AK Interactive Pigments - Gun Metal, Europe Earth, Russian Earth, Medium Rust, Pigment Fixer Vallejo Masking Fluid Winsor & Newton UV Cut Matte Enamel Varnish Brushes: Pure Sable Brush - Various Sizes Glue: Tamiya Extra Thin Cement Tamiya Poly Cement Revell Contacta Professional Loctite 406 CA Superglue Sanding: 3M 600p / 800p / 1200p / 2000p / 3000p sheets & sponges Tamiya Polishing Compounds (Course, Fine & Finish) - Jak na to + styl
The use of actual Alcantara for the dashboard just blew me away!!
Thank you and thanks for watching :)
The details so beautiful.
really nice build.
I like the technique you used for baked carbon imitation, it will be interesting to try it as well :)
Thank you and thanks for watching:)
Hey everyone, hope you're keeping well and safe around the world. I also hope you enjoyed the video. As I said, this is my very first model car build which I thoroughly enjoyed. If you didn't then don't worry - I'll be back to the usual aircraft uploads in the next video! 🇸🇪 I was also having some fun with the video edit at the end too - no apologies for the music choice.... Lamborghini don't really suit classical music 😄
The STIG would beg to differ! Classical is perfect for drifting around the track. 😇
Using a sponge to replicate the forged carbon fiber is a neat trick! what a beautiful build
Ooooh, that's a gorgeous color!
You're one talented modeler I would love to see you build more car kits especially a rally or DTM car
Yet another incredible build. The paint finish is brilliant 👌🏻
😧🤯🤤 seriously gorgeous!!! Love the color choice!!
Oooohhhhh shiny! Really nice paint job.
A wonderful car and a great build. Bravo!!!!!!!
Amazing build. Please Keep building cars. Excellent paint job
With your skills you made the build look like a breeze with an outstanding result! Cheers!
Awesome! What a nice paintwork. Looks like a real car to me. I love it.
beautiful master piece
That sure turned out awesome.
one absolute awesome built! love it!
it's so amazing to see one of my favorite cars being built in such a careful way 😍 thank you so much for the video, it is an incredible build!
Thank you and thanks for watching :)
I like the Alcantara skin you put on the taplo face. It's great ! A good idea. Nice Video !
super job with a lot of details
Now that's what I call truly Nerd-A-Licious.............................
Loved it. Quality craftmanship delicate touch and exquisite workmanship. All the qualities of a masterpiece. Thank you for sharing this with us, mere mortals. Mike
Great build man👍
Fun fact: Ferrucio Lamborghini( the founder of Lamborghini) had named his first cars from bull riders, like miura
Yes that's correct. In fact the more recent ones are too, the Aventador and Murcielago I believe are named after bulls too. Thanks for watching :)
Excellent build mate😉👍
brilliant build...
Excellent , nice, clean straight-forward build. Good work mate!!
Thanks Michael! This was my first car so some new things to learn. Keeping it from the box only made the job a little easier for me :) Thanks for watching :)
Breathtaking!😍
Thank you and thanks for watching :)
Amazing 👌
Well worth fast forwarding!
Im new to modeling and this video really inspired me to create. Thank you your skills are of the highest tier
Hello and welcome. Thank you for the kind words. I hope my channel can help you along with your modelling adventures. If you’re interested in a modelling masterclass I offer this on my Patreon page for beginners. www.Patreon.com/theinnernerd. I show all my techniques in more focused and easy to follow videos if this is something you would benefit from 🙂
Love it 🙂👍 well done 👍🇬🇧👊
Great work
Excellent job! Looks amazing!
Thank you and thanks for watching :)
Absolutely amazing. Can't believe this is your first car!!!! Great work!
Thank you and thanks for watching! :)
Nicely done, great looking kit.
Thank you and thanks for watching :)
Nice build
Awesome paint job. I love it.
Thank you and thanks for watching :)
Hells yes pl3ase mooooorrree!!!
Okay! Thanks for watching :)
bravo..super video and build :) Cheers
Super Job 👍👍👍👏👏
Amazing skills I love all your videos
Thank you and thanks for watching :)
That dashboard. 😎
Thank you and thanks for watching :)
your skill is absolutely insane
Thank you and thanks for watching :)
Very great job! I think this Zero colors are not really blue, but greenish instead. Not like on the actual car, but awesome and I like your version more! Keep it up mate, you inspire me during the builds!
Thank you. Yes the Verde Artemis wasn't really what was on the picture on this and it definately turned out more green than it should've. Anyway cool colour! Thank you and thanks for watching :)
Very good job, I want to see more cars on your channel
Earrape @ 28:03
RIP Headphone users 😂 To be fair it’s not that loud on the levels. But I guess if you’re not expecting it it’s a bit of a shock
What a strange but beautiful color. The build was excellent! The carbon fiber method is so simple yet effective. I need to get on my Aventador, I just can't decide on body color!
Yes I didn't know this colour existed until I saw a car in exactly this spec out on the road. After some research I found it. Good luck with the Aventador, I vote Blu Aegir for your scheme👍
@@TheInnerNerdI will check out this color! At first when i got the kit I thought maybe a light gun metal. I've moved away from that plan.
@@raimee81 Ive got the Aventador on deck and I'm going with the Blu Fontus spec. I'm using Tamiya TS-64 "Dark Mica Blue" as its the closest I could find that's readily available.
Nice
I would love to see you do more sports cars ie Lamborghini / Ferrari 👍
Thank you and thanks for watching :)
I've never been a model car modeller but that turned out really well though it seemed to be a lot of work. Perhaps I'll try one or maybe a truck. I do like Kenworth's.
it's so cool
Thank you and thanks for watching :)
Nice work, and please continue to do the odd auto model
Yes..do a few more cars :)
I’ve only built a few cars. The body on every one was a pain to get attached to the chassis. Nice job
Thank you and thanks for watching :)
Amazing work! I have a question. You coated the body at first with the Tamiya clear coat. Which thinner have you used?
Thank you. The Tamiya clear is thinned with Tamiya X-20A acrylic thinner. I try to use own brand thinner to stop any micing complications as some are not cross compatable. Thanks for watching :)
You can also use flocking powder to give a alcantara look , and your jo bs very good
Nice Job 😊😊😊
Thank you and thanks for watching :)
So good...it's now in my stash!! Can I ask where you get your polishing mops from for the Proxxon? My wool ones disintegrate within the first few seconds!! Thanks...
Thank you and thanks for watching! I got these ages ago from eBay. They’re nothing special and do the same as yours by the sounds of it so I can’t help unfortunately. The only thing I will say is I rub off a new one before (the buffing wheel I mean 😂) applying the compound to get most of the fluff off it. Then when applying the polish, barely apply pressure and they should last for a few models before they are shot. Hope this helps and good luck!
Very cool. It's always interesting to see how non-automotive builders approach building cars. You do some things the same way we would, others in ways we never would, and yet others in ways we would never even think to try. always looking for new ways of doing things.
Thank you. Yes this was an entirely new project for me and was a good experience for me to learn new techniques that I wouldn't normally touch. Thanks for watching :)
You should do more cars.
How did you mask at 4:17? Did you base it in the blue first and then mask the accent lines and then give it a black coat! Thanks!!
I did the black first and then masked that off to spray the blue. It was easier this way since the blue accents where too thin to get a decent mask on them. Thanks for watching :)
Nice! Try spraying through women’s fine nylon stocking, simulates carbon fiber like the bomb!
Different deniers for different model scales. Works a treat and looks awesome
For a first car build that's amazing! I've been building the things for neaarly 50 years and still struggle to get a finish that nice! Could I ask where you got the buffing mop for your Proxxon for, and that sheet of alcantara to cover the dash top - only found incredibly expensive big sheets on e-bay!
keef r Thank you and thanks for watching! I got them from eBay when I started the channel so I can’t remember the detail. I remember searching soft buffing mood though which is a start, took me a while to find them between the cloth types you see loads of. Sorry I can’t be of more use on this but good luck!
@@TheInnerNerd No worries, thanks for the reply I shall go hunting!
I wonder if you could find 1 or 2 very fine mesh/brass screens, maybe 2 of them on top of each other at opposite orientations and place over carbon fiber parts and spray silver thru that for a uniform looking carbon pattern? Idk just throwin an idea out there lol
That may work yes. It’s also been suggested to use a set of tights as this also gives the crosses effect of carbon with good results 👍
Quality vid man! What do you make of the TOMs modelling channel? The benchmark or completely OTT?
Thank you! I assume you mean Tom Grigat? His videos are excellent and something completely different to what I am doing with the stop motion capture style. Its hard to say a benchmark when the capture styles and delivery is different but the models turn out really nicely. He does a great job as do many CZcamsrs making their style of model 👍
The Inner Nerd well his delivery and stop motion aside, his attention to detail and perfectionism is second to none. If you know of a better modeller out there I would love to check them out 😀
That’s great. I didn’t realise it was a competition to be the best. I’m here because I like to share the love of modelling and enjoy sharing the model making experience with others. If it helps inspire and get people into the hobby then it’s all good for the community 🙂
The Inner Nerd I was just looking for a recommendation that’s all..
Great build and very nice colour choice! May I know your airbrush settings, as you've done a great job laying down Zero Paints so well!
Thank you and thanks for watching! I sprayed the Zero at about 10psi and ~120mm from the model. The Airbrush is a Harder and Steenbeck Evolution Silverline with 0.15mm Nozzle
@@TheInnerNerd Thanks for the info, I'll give that a try next time
Hi ... admired by your work! I'm Italian and some things escape me even with English subtitles. If I understand correctly, you pass the x22 over basecoat because it is not as aggressive as the gx and do you prefer the gx clear to the 2K because it is easier to sand and polish and because it is thinner and more realistic on a scale model? I would like to ask you what ratio you dilute x22 and gx clear and at what pressure you spray. Thank you!
Hello and thank you. You understood correctly. I thin the X22 and GX100 to around 50/50. The self levelling thinner in the GX100 works best at higher ratios like 50/50 to help dry smoothly. For clear coats I have found that 10psi works best through my H&S Evolution Silverline with 0.15mm nozzle & needle. Hope this helps and thanks for watching :)
@@TheInnerNerd Ok ... I use 0.3 to 0.4mm airbrushes, so maybe it would be better to dilute less? How many hands do you give for the Gx? Always thin hands and how long to wait between hands? Thank you! Thank you
More cars please 👍👍👍
Thank you and thanks for watching :)
Amazing we wan mercedes sls gullwing
ciao. congratulations for your job, really well done. please, I would like to ask you what material of fabric you used to coat the car dashboard. thanks
Hello and thank you. The material is Alcantara. It's the actual material used on the real car and can be bought in rolls. I had this left over from another job which wasn't model related
The Inner Nerd I was sure it was Alcantara 😁. did you have to thin the thickness?
@@geppo9012 Yes this is split down to around 0.2mm! It barely holds itself together
@@TheInnerNerd Thx Man!
beautifull car. Have you ever tried to build a 18 wheeler?? Otherwise I suggest you do that.
Thank you and no I haven't done one. This is only my second civilian vehicle but I have considered doing a truck cab
Wow this looks great! I am using a similar tri-coat gravity color for my tamiya ford gt. What nozzle size would you recommend for the clear metallic topcoat and how do you avoid spraying some areas darker than others? Thanks.
Hello and thank you for watching. I use a 0.15mm needle and nozzle setup on my H&S Evo Silverline and it sprays just right. I use a very low air pressure (8psi) for the Zero paints to reduce the risk of orange peel as well as tip-dry before the paint lands on the model. In terms of layering, I just kept applying in very thin coats until the colour became fully opaque. This is quite hard to determine depending on the colour but once it seems that the colour does not change after applying more, that should be even enough.
@@TheInnerNerd Thank you so much for the response! Looking forward to future videos!
hey man, was just curious to know if you would build and sell these. I would for sure buy one. Quality vid as well.
Hello. Yes I do make commission builds of vehicles. So cars, motorcycles, military vehicles etc. If you're interest please contact me at the.inner.nerdYT@gmail.com and we can discuss what you'd be interested in. Thank you and thanks for watching!
Be great if you made somemore car kits 👍
Thank you. I've got a few car kits I've yet to complete so would be a welcome change to the aircraft. Thanks for watching :)
👍👏👌😚🏁.....
Hola, exelente trabajo, una pregunta, que producto utilizas para remover el cromo de las piezas que lo traen y asi poder pintarlas de otro color?
Luis Palma Hello and thank you! I use regular oven cleaner (no water added) and let them soak overnight. This will take off the chrome plate ready for priming and in Mr Surfacer in this case
@@TheInnerNerd Muchas gracias amigo
great model, just really need to know what that polishing machine was gave a superb shine to the model i want one for myself!!!!
Thank you and thanks for watching! It does day down at the bottom left of be screen. It's a Proxxon Micromot 50/e. You'll need the power adapter too if you're getting one since the power lead to the tool is a bathroom style plug 👍
@@TheInnerNerd thanks for the fast reply seeing as its early morning, i'll be sending for one soon as i'm back in work since i've been laid off due to this damn virus.
thanks and once again great model
Do you have a secret to Super Clear iii? I'm switching from 2K as it's not as readily available here. Tried SC3 with 3 light coats (10min interval) & 2 heavy coat (4hr interval), can't seem to lay it smooth enough as in your video, 1:4 ratio @ 19 psi through Infinity 0.4mm. Any tips would be awesome! Thanks!
Yes... but it’s a secret so I can’t tell 🤫 Just kidding 😂 so the key is to thin it LOADS with self levelling thinner (from Mr Color again). Straight from the bottle I suggest start with a 50/50 mix and see how you get on. I sprayed this thinned to around the 50/50 mark and laid down 2 mist coats to get it bedded in. 10 mins between cycles. Then after that 3 wet layers waited 45mind between cycles. To get it to sit flat you have to get the thinner to do the work or it will orange peel. My method still gets a little but is easily sanded smooth. I spray H&S Evo Silverline. Working pressure 8/9psi on a 0.15mm nozzle/needle setup. Hope this helps you out!
@@TheInnerNerd Hahaha. Top secret info released! Thank you for sharing some tips, will definitely try it out and hopefully get some results. Cheers!
Very nice build - nice details.
Your Italian accent needs work though. ;)
Great vid, thanks for sharing.
Thank you and thank you for watching. Haha yes I’m a better model builder than linguist and always will be 😂
En nu sparen voor een echte 👍
Frank 939 Hahah this is the closest I’m going to get for now at least 😉😂
Что за мерзкий звук перед фотогалереей???
Very buce my freind new sub from my channel to support yours grat car very nice kit 👍
Constructive critisism: You could've thinned down the exhaust pipe with a drill, and personally I think they look better with a matt black inner coat. Other than this it's very nice, and love the color choice, but damn Aoshima is nowhere near the quality of tamiya :'(
Okay thanks for the tip! I agree this would have made it look better and something I hadn't thought of at the time of building it. For my first car I think I missed some easier and more accurate methods. Thank you and thanks for watching :)
lots of errors, good try, I assume for your first car
It’s my first yes. So what are the errors in your opinion and what can I do to improve them? I can’t improve on what I do if I don’t know what is an error, right?