Mega Monster Mud Truck BUILD & Holmes Hobby 3500kv PULLER PRO BL Motor UPGRADE! | RC ADVENTURES
Vložit
- čas přidán 4. 03. 2019
- You see, I am building a "Down South Monster Swamp/Mud Truck".. and they are all about BIG AIR, and HUGE MUD PITS! In order for this to be authentic.. I must make the tires High, the suspension high, and the power ... HIGH! Yes, its winter outside.. but I am almost ready for the MUD season!
My FRONT Axle is Unlocked, but my Rear Axle is LOCKED! The Tires are Glued. My next upgrade HAS TO BE THE ESC and MOTOR! I am selecting a Holmes Hobbies Puller Pro BL, sensored , waterproof 3500 kv Motor! The ESC I am using a Tekin Waterproof RX4, .. a perfect match for this truck. I say this because it is also waterproof, sensored, and completely onboard programmable.
If you are interested in the Holmes Hobbies Motor, or other motors form Holmes Hobbies here is a link: bit.ly/2EP94TZ
J Concepts Blue Compound Dragon 2.6 Wheel
FLING KING TIRES: amzn.to/2Li2Nle
J Concepts Dragon 2.6 Mega Truck Wheel with Adapter, Black (2)
amzn.to/2EkvrRi
You know darn well I wanted to take this outside.. so I DID! let's rip :)
The Axial SMT10 Truck I am using, unfortunately has been discontinued.. but if you look on ebay.. or look around a little you might also find one.
I hope this video is interesting for you.. and has a few helpful tips and tricks...
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshirt.ca/RCSPARKS/
RC ADVENTURES™/ RCSparks Studio™ © 2019 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc. - Auta a dopravní prostředky
8:14 Glad you like the way it drives! You can gear it up pretty tall too, there is a lot of stator crammed in the 540 length. 96% the motor of a roc412HD or Castle 1410!
I put one of the Holmes Hobbies servos in my Axial Bomber and was blown away by its power! I'll be going to them to power my next build! 👍
I have that exact same in my TRX-4 mated to the Holmes Hobbies BLS SHV500v2 Brushless 12V Crawler Servo and Holmes Hobbies Trailmaster BLE Pro ESC. Probably the most expensive group of parts on the truck but I'm not at all disappointed. I'm relatively new to RC crawlers, and channels like yours are what encouraged me to get into it. (And try Holmes Hobbies products)
Holmes Hobbies is a company you want to support. Plus they have incredible technology.
Yes finally home to watch ...this makes me forget about how bad my day was
Glad to see some more Holmes hobbies power! Love everything they do over there, some quality dowm to earth people
so glad we got to see this truck run with the new motor, it rips in the snow, and the stance looks sweet with that body.
When I lived in St Louis, MO I met the owner of Holmes Hobby. He makes amazing motors of all sizes. When I was competing at MO state crawler championship he was there on an electric mountain bike that he built. It would do 45+ MPH.
A brushless mud MONSTER I GOT TO SEE THIS!
Holmes makes great motors !
Oregon had a cold one too, can't wait for spring to get here. RC on my brother...
Awesome !!!!
The colors are really coming together nicely all over the truck 👍🏻
I did get the Max-D last month n just ordered some upgrades for it, been watching a bunch a vids on which upgrades to get n was interested in this motor too, also love the body I also decided on a f350 for mine, getting the Max-D body signed this weekend, my buddy is taking it to monster jam, so keeping it for the shelf, the body not the truck LOL
I just bought that same motor it is the best one I have ever run!!
First Class Collection! My Son and I Can Only Dream to Have. BIG 👍 Medic!
That thing hooks up good on powdered snow! Should be able to sink that thing to the windows!
Everything about this looks phenomenal. Such a great rig.
It's aweaome to see U thrashing an RC around again Medic.
With those Tractor wheels the snow is only a formality!!! Nice model Nice weather nice video thanks!!
That truck is Sick. And that body goes perfect with it. The flames with that red on them wheels. Can't wait for next vid.
That's awesome, those tires rip the snow up and the flames really work well with the orange rims and parts. Yeah snow bashing!
Can't wait to see it in the mud
Great setup! Look forward to seeing the mud fly!,
That truck is awesome
Lots of fun and exitement!
That thing can rip...great addition motor wise...😎
That thing rips! good stuff.
That monster truck looks sick!! Sweet upgrades!! Thanks for the video!!
Fun truck!!! Looks great!
Sweet Monster Mudder, can't wait to see it in the mud.
That's a sic paint job!!
I can't wait to see it in the mud pit.
The mud is coming soon! April is mud month.. but I have a feeling the later half of March is going to be full of it too.. just a few more weeks..
Awesome video, love that truck!!!
Nice twist on the smt10 platform.👍
Such an awesome truck.
Very good upgrade for the monster truck !!! Excellent , awesome test in snow !! Great video !!
Thank you Sator! I had to test it, of course!!
😊👍 @@TheRealRCSparks
Will send a lot of mud flying that's for sure. Be sure to protect the sensor port. Motor and ESC might be waterproof, the connector is definitely not. I use a think conformal coating kind of glue. It's not one of the spray conformal coating, it's something you have to spread by hands, it's perfect for this use case. I use it on my TRX-4 with sensored brushless motor, works great.
Nope.. just some dielectric grease! :)
Dielectric is perfect for it. If you want to submarine, I would recommend covering the face bearing of the motor too and around the solder tabs where they enter the case. On new housings we have shrank down the hole so there isn't much as bearing showing and less grease needed.
Omg nice good job!!!!
Love Holmes Hobby. Very nice
Awesome truck Medic love it!!!
U know what i liked the most Medic...those orange swing arms 😎👍👍👍. This is called a real MONSTER 😈💥💣
Got the matching set on the way Buddy! Should be here in the next week to finish off the look.. just in time for SWEET SWEET MUD!
Awsome!!!
This seems to have morphed from a mud truck to an allround beast. Love it ,Medic!
I've watched several videos and this one actually made the hobby look as fun as it actually is great job!
Love that you are enjoying Holmes Hobbies products. They also offer great esc's. They use the castle software for programming.
Awesome truck!
WooooooW very nice amigo!
Some people may not like what you did to that truck but I can value how you have taken lots of the original truck parts off so you don't destroy original parts ...kinda smart in my book!
Love that rig 😁
😁👍It looks wicked!
Looking amazing. Really good video .
So sweet truck...❤
awesome video, love the tires.
Nice !!
Nice build sir!
Awsome mud truck bet it will be awsome in the mud!! Hah make some more vids with moe
The power of brushless and the on demand torque of brushed that motor is a monster. Please keep me posted on how it holds up
I love vids in the snow
I have been waiting to see this beast again!!!
Love the video
Awesome truck medic love the flying snow goes greatooks sharp
Nice rig
Handsome truck
Love it man
Those tires hook up really well in the snow. It sounds good too 👍🏼
Great video awesome truck excellent motor really made it come alive wicked build
Holmes motors rock. I have been using them for a while.
Amazing rig!!! Love these videos always brings a smile!
Glad to see you using more Holmes Hobbies. I only use HH.
Love it
Keep up the good work man. I would love to see more scale RC crawling videos👍
Awesome build good work bud, she’s a ripper 👌✌️
Looks like 🔥🔥
So much power, a Monster mug truck with unreal insane gear, this year you are going to win 2019 TTC mud bug for sure, thank you for creat this scary machine.
Love youre channel dude been here since 2015 keep it up
MeDiC!!!!! I love watchin you.....👊🏻💪🏻💪🏻🤘🏻🤘🏻
Awesome video bro your a great CZcamsr👍🏻👍🏻
Freaking awesome
Dude I love that truck
That transmission is amazing I have t in black make sure you grease it up. It is a Que T transmission. I love it and it stands up to my brushless motor.
Great looking body! Those tires are going to tear up that mud that we are both hoping will arrive soon. Tired of the cold looking forward to getting out and playing with RC in some warmer weather for sure. 👍😁😉. You know it’s funny I have alligator clips for soldering , but most often seem to not use them. Lol. Nice video Aaron , thanks for sharing. ✌️
Holmes Hobbies yay:)
Aaron my friend you have built one hell of a ride bro. Love it. And thank you for the video.
Who needs mud, lol, that was awesome, love the snow go!! Great video, thanks for sharing!...Bill
nice rig looks great and rips around real good awesome congrats on the build
Nice
Verry nice
Wow bro what a powerful rigthe body is awesome great job
Amazing truck I seen all the build videos great job.
very good
Oh yeah about time for some real power
Nice truck I love it😎👍👍👍🇺🇸
👍 More vids like this one
This monster shape like the badest monster truck awesome video
Awesome video my brotha very cool rig happy bashing bro👍🤙😎🤪😜😝🙈🙉🙊👊✌
it goes good now
the jconcepts tires are awesome
Truck looks awesome and powerful. Absolutely love it man. Keep it up 😎👍
Another great vid. Warming u- here so maybe get out soon just gotta dodge the storms.