Very helpful. I found it difficult to get the electrical connector difficult to disconnect - however I was able to rotate the blower with the connector connected then lower and rotate the blower to provide easier access to the connector to disconnect. This was the first replacement so I had to remove the firewall insulation similar to what had been done in your case. I had a dual heating unit so access/ viiewing was more restricted but having this video was very helpful in accomplishing this job - thanks!
Yeah, mine has got carpet and less than 10 degrees the old fan came out in pcs. Brittle Plastic when well below freezing. Good job making video, must have been fun trying to get your camera under there. Good job. You da Man.
Wow... Best instructions short and sweet
Thanks for keeping it simple made my life a hell of a lot easier
Very helpful. I found it difficult to get the electrical connector difficult to disconnect - however I was able to rotate the blower with the connector connected then lower and rotate the blower to provide easier access to the connector to disconnect. This was the first replacement so I had to remove the firewall insulation similar to what had been done in your case. I had a dual heating unit so access/ viiewing was more restricted but having this video was very helpful in accomplishing this job - thanks!
Thanks , got one to do tomorrow and couldn't remember if had to pull dash or not. Ford engineers were actually thinking on this one !
Great video, had the motor changed in 10mins on my 2010 f350 work truck!
Tapped my blower motor and its started working again thanks man
Beautiful job took me 4min
Nicely done. I hope I can find as good a video on the fuse.
this video really helped me out with swapping the blower out, thanks for posting
Super súper gracias,pude arreglar mi camioneta de trabajo bendiciones
Thank this helped me out a lot
Yeah, mine has got carpet and less than 10 degrees the old fan came out in pcs. Brittle Plastic when well below freezing.
Good job making video, must have been fun trying to get your camera under there.
Good job. You da Man.
Man!!!!! This help me like you have no idea could find this blower for a bout 4 day 😂😂😂😂 till i found your video thank you man so much 🤘🏼❤️🔥
Thank you. That's a lot better than the screws trying to unbolt it.
What os the part wotht the two tabs that you pulled off the motor, in the beginning withthe two tabs called.
Awesome thanks
Great video
Wow easy thank you for the video
u the man great show
Exactly what I needed thank you. 2009 F350
Thx so much!
Rad thank you
Not the same for 2010 f450 apparently, not sure what others are different
Why was the blower motor replaced?
It was bad. It was open i.e. no continuity.
Nice 2010 f250 SD
How much does a blower cost 2008 F250 Ford Lariat V10
A