The cloning function on these doesn't work no matter how condescending a voice you tell us "how easy it is to extend your wifi network" in. What a waste of money.
It works for me. No issues. Exactly as this video describes (apart from the fact as already pointed out that the buttons are illustrated the wrong way around)
Hey! Is there any chance I can put the first dlan (the one which remains all the time close to the router) in another room but still linked to the router you the Ethernet cable. I’d like to do this so that part of the power isn’t lost in it’s trajectory to the other 2 adapter S
The tutorial is wrong. To clone the second adaptor, first press the encryption button of the second, then the wps button of the first (and not the encryption button as they said). After a few minutes, all your network will have the same name than your initial router.
Wasted absolutely ages trying to clone it. First followed the paper instructions included (they are wrong - steps missed out) then the CZcams video. Still not working. Considering taking it back to the shop for a refund.
Hi Guys. Cloning worked fine for me first time I did it with my old Technicolor router. Then I tried to add a second adapter, having in the meantime got a Genexis DRG700 fibre optic router. Couldn't get the second adapter to clone from the first, despite umpteen attempts, and thanks to conflicting instructions managed to overwrite the settings on my first adapter completely ****ing the whole setup. Then couldn't get the original adapter to clone from the DRG using the WPS button. Tore lots of my hair out. - swore a lot - got bol***ed by the wife. In the end I had to connect my laptop using the off the shelf Devolo SSID and WIFI password that was now written to both adapters, then used the Devolo software to change the SSID and password manually. Strangely once I sorted the one adapter, the second one changed itself to match!!! Baffled, but now its all working and I'm sweeping up the lost hair.
@@vegasmike it just doesnt work for most people, no matter how often you write it works for you. my cockpit software for example doesnt detect my wifi adapter
It does work. but it takes some effort. the move technology doesn't work that well, that is mainly because the of the receivers not latching onto the stronger signal.
It does work, somewhat.. It also depends on your powerlines ofc. If you have old powerlines in your house/ appartments then you should expect packetloss and disruptions, and you are better of with a regular cable. (i know, we hate cables!!)
Hello, i try for one year to use this devolo 500 mbps, i tried everything you said and after youtube all the variants, the result is the same, there is NO INTERNET CONNECTION
It worked for me! If it doesnt work for u try to reset all the devolo until the have their default settings and put the video from the beginning following all their instructions
Not in my case. I resetted the WiFi device by pressing the reset button for longer than 10 seconds and the WiFi cloning does not work in spite I follow the process in this video.
just moved home brought my devolo with me which works great at the last house but when i pug it into the router it knocks out the wifi completely why is this
What a load of rubbish, the wired adapter won't connect to the other unit, flashing red lightand no mention of this anywhere, i will be sending these back as soon as possible
Red light means there is A) too long distance in the wires between the units, B) too much electrical noise from other appliances close to the units, C) something dividing your power network, i.e. two different power meters
It works but it’s so slow because I plugged it into my Xbox (wired) after everything was set up, I got 24mbps and then when I did it with out the Ethernet port (wirelessly) plugged into my Xbox and it doubled the speed (45mbps). So you would rather use your internet wirelessly than using that crap.
The manual is an absolute mess that doesn’t answer the simplest and urgent questions nor the buttons proper functions in 56 pages. I can’t clone the WiFi either. I guess I’ll need to download the software, but that misses the point. Anyone knows if a 10€ Belkin or TPlink can do the job?
Not very impressed with this product, or the companies attitude in giving me some advice. Instead of them being proactive and leading the conversation in giving me help, I had to keep asking the questions including prompting them if they were still on the other end of the line (must have been siesta time). Someone in authority needs to read these negative comments and get a grip on things.
These adapters are truly a nightmare. They work for weeks, then for some reason they stop workign and there is no way to pair them. Not even when the whole setup has been reset to factory settings. CRAP !
I’ve got one of these kits, looks great in theory but the product’s usability is very poor in my opinion. One plug works fine the other is extremely temperamental. I won’t buy from this company again until the set up is simplified. I just tried to post this once but my connection was lost. Enough said
i have a devolo magic DIN rail and for some reason has a conflict between the develo system(din rais + 6wifi clone) and the router/access point system, if devolo system doesn't have dhcp, so what is causing the conflict(before this days it was working perfectly)
@@arnaudstrijp6554 there is an error on this video. I figured out how to do it. To extend the network with a second adaptor, they said to press the encryption of the 2 adaptor. Actually you have to press encryption button of the second, and wps button of the first. Work for me like that
Use the Cockpit software which comes on the disc, you can do lots of things from there including restore each item to factory defaults. You can switch all the LEDs off on every item which is good if you've got one in the bedroom.
Not easy at all. A real faff actually. Lots of running around the house pressing buttons and endless flashing red lights. Maybe I'm asking for too much but why can't you just stick the adapters in the plug point and they sort themselves out? Why the need for encryption blah blah. You still need to have the password for each adapter to use it so why all the complexity. Another example of tech designed by IT geeks with no input from ordinary punters who want gizmos to just come out of the box and plug in.
Believe it or not sticking the adapters in and letting them do their thing actually used to be the case, i used these adapters over ten years ago and it was a simple as plugging them in I now have a new set and it's a real faff, simplicity no more !!!
The result of following these instructions is that your internet connection will crash. That's all. You certainly will not connect any new clones. If you follow the paper instructions in the box they differ from this video although they do have one thing in common, they don't work either. What a load of rubbish Devolo.
DOES anyone knows how to turn off the wifi. if for one, i want to use only the lan cable and avoid having radiation in the room is it possible to turn the wifi off?
No amount of breezy marketing banter about how simple this is can change the fact that this is fiddly, frustrating and unclear.
It's horible
The cloning function on these doesn't work no matter how condescending a voice you tell us "how easy it is to extend your wifi network" in. What a waste of money.
Looks easy. But it just doesn't work.
Agree. It does not work! Found a solution: recycling!
...not helped by the fact that the video shows the 2 buttons the wrong way round...
Angel Productions I noticed that too😆!
It works for me. No issues. Exactly as this video describes (apart from the fact as already pointed out that the buttons are illustrated the wrong way around)
The lights just flash for me on both
Did you manage to sort it out. If so please share
The style of explanation is above natural
Hey! Is there any chance I can put the first dlan (the one which remains all the time close to the router) in another room but still linked to the router you the Ethernet cable. I’d like to do this so that part of the power isn’t lost in it’s trajectory to the other 2 adapter
S
The tutorial is wrong. To clone the second adaptor, first press the encryption button of the second, then the wps button of the first (and not the encryption button as they said). After a few minutes, all your network will have the same name than your initial router.
when you say the wps button the wifi button?
Oh my God, thank you...thank youuuuu. It's working thanks to your info!
Wasted absolutely ages trying to clone it. First followed the paper instructions included (they are wrong - steps missed out) then the CZcams video. Still not working. Considering taking it back to the shop for a refund.
This saved my life. its work for me. thank you so much ;))))
Hi Guys. Cloning worked fine for me first time I did it with my old Technicolor router. Then I tried to add a second adapter, having in the meantime got a Genexis DRG700 fibre optic router. Couldn't get the second adapter to clone from the first, despite umpteen attempts, and thanks to conflicting instructions managed to overwrite the settings on my first adapter completely ****ing the whole setup. Then couldn't get the original adapter to clone from the DRG using the WPS button. Tore lots of my hair out. - swore a lot - got bol***ed by the wife. In the end I had to connect my laptop using the off the shelf Devolo SSID and WIFI password that was now written to both adapters, then used the Devolo software to change the SSID and password manually. Strangely once I sorted the one adapter, the second one changed itself to match!!! Baffled, but now its all working and I'm sweeping up the lost hair.
Oh God, I've just bought the 1200 version and not looking forward to this 'simple' installation
@@fueltoblaze1554 I know its been a couple years but do you remember what software you used?
@@JunaidJDM You can manually set it up through the cockpit software. Mine works great.
@@vegasmike it just doesnt work for most people, no matter how often you write it works for you. my cockpit software for example doesnt detect my wifi adapter
Cloning doesn't work for me either.
Neil Egerton ha it works for me
is it better to use the wifi as the booster network or connect to the original network when you clone it?
Looks good, Seems easy! Doesn't work, support non existent, "German Quality"
It does work. but it takes some effort. the move technology doesn't work that well, that is mainly because the of the receivers not latching onto the stronger signal.
Still using this! Thank you xx
Cloning doesn't work on 500AV+ latest firmware. Can we do it manually via cockpit or 192 address?
Wifi Clone doesnt work for me... it stills show devolo wifi instead of router´s one. Any clue? THX
Mine shows both!
WAIITT.. You guys have singal?
I don't 😭
It does work, somewhat.. It also depends on your powerlines ofc.
If you have old powerlines in your house/ appartments then you should expect packetloss and disruptions, and you are better of with a regular cable. (i know, we hate cables!!)
Thank's for the video it help me a lot
Hello,
i try for one year to use this devolo 500 mbps, i tried everything you said and after youtube all the variants, the result is the same, there is NO INTERNET CONNECTION
You can manually set it up through the cockpit software. Mine works great.
Buttons are the other way up on my adaptor!
It worked for me! If it doesnt work for u try to reset all the devolo until the have their default settings and put the video from the beginning following all their instructions
Worked for me too that way.
Not in my case. I resetted the WiFi device by pressing the reset button for longer than 10 seconds and the WiFi cloning does not work in spite I follow the process in this video.
Its all fun and games until you can't even get it to sync
You can manually set it up through the cockpit software.
So after i clone the network does the devolo one still appear on the list?
any idea if the adaptor name can be changed so it will appear as something other than 16 digits, as i've got two adaptors..
You can manually set it up through the cockpit software. And yes you can name it anything you want to.
2:04
just moved home brought my devolo with me which works great at the last house but when i pug it into the router it knocks out the wifi completely why is this
GUYS press and hold your router wps button for 2 second instead of briefly pressing it
What a load of rubbish, the wired adapter won't connect to the other unit, flashing red lightand no mention of this anywhere, i will be sending these back as soon as possible
Red light means there is A) too long distance in the wires between the units, B) too much electrical noise from other appliances close to the units, C) something dividing your power network, i.e. two different power meters
Can I use the magic 1 wifi mini as a standalone repeater without a plc connection ?
It works but it’s so slow because I plugged it into my Xbox (wired) after everything was set up, I got 24mbps and then when I did it with out the Ethernet port (wirelessly) plugged into my Xbox and it doubled the speed (45mbps). So you would rather use your internet wirelessly than using that crap.
The manual is an absolute mess that doesn’t answer the simplest and urgent questions nor the buttons proper functions in 56 pages. I can’t clone the WiFi either. I guess I’ll need to download the software, but that misses the point. Anyone knows if a 10€ Belkin or TPlink can do the job?
Thank you sooooo much!!
Don't be surprised when you start getting bald because of all the radiation in your house...
That’s genetics 🥱
@@smartwhip. Or 5G😄
Deeply frustrating and no sugary voice makes cloning any simpler. I cannot get the home button to stop flashing.
You can manually set it up through the cockpit software. Mine works great.
@@vegasmikecan you fuck off saying the same thing under every comment
Not very impressed with this product, or the companies attitude in giving me some advice. Instead of them being proactive and leading the conversation in giving me help, I had to keep asking the questions including prompting them if they were still on the other end of the line (must have been siesta time). Someone in authority needs to read these negative comments and get a grip on things.
These adapters are truly a nightmare. They work for weeks, then for some reason they stop workign and there is no way to pair them. Not even when
the whole setup has been reset to factory settings. CRAP !
U gotta be patient. But it works easily!
Lari MCcann do you have to wait til it stops flashing
dónal Coulter when?
Lari MCcann before you try use it on your computer
dónal Coulter it depends. If u’ve already linked it to ur main devolo and it shows upthen u should be able to use it.
I’ve got one of these kits, looks great in theory but the product’s usability is very poor in my opinion. One plug works fine the other is extremely temperamental. I won’t buy from this company again until the set up is simplified. I just tried to post this once but my connection was lost. Enough said
Never fails to depress me......encryption button, home button, what order, why? please God help!
i have a devolo magic DIN rail and for some reason has a conflict between the develo system(din rais + 6wifi clone) and the router/access point system, if devolo system doesn't have dhcp, so what is causing the conflict(before this days it was working perfectly)
It worked for me, absolutely no problems
Mark Giles how did you get wifi cloning to work? I follow the steps and it just doesn’t work.
@@chriskokkalis2063 You can manually set it up through the cockpit software. Mine works great.
@@chriskokkalis2063 Dont follow the steps. Read my reaction above
@@arnaudstrijp6554 there is an error on this video. I figured out how to do it. To extend the network with a second adaptor, they said to press the encryption of the 2 adaptor. Actually you have to press encryption button of the second, and wps button of the first. Work for me like that
Shittest wifi that could possibly exist
Rooter 😂
Thank you it worked for me
This product is shit! After 3 hours it finally worked and the following day no ip adress found...
My device just keeps blinking
Hi, I want to restore my devolo to manufacturer settings, can you help?
No lol
Use the Cockpit software which comes on the disc, you can do lots of things from there including restore each item to factory defaults. You can switch all the LEDs off on every item which is good if you've got one in the bedroom.
Same problem, doesn’t work.
Not easy at all. A real faff actually. Lots of running around the house pressing buttons and endless flashing red lights. Maybe I'm asking for too much but why can't you just stick the adapters in the plug point and they sort themselves out? Why the need for encryption blah blah. You still need to have the password for each adapter to use it so why all the complexity. Another example of tech designed by IT geeks with no input from ordinary punters who want gizmos to just come out of the box and plug in.
Believe it or not sticking the adapters in and letting them do their thing actually used to be the case, i used these adapters over ten years ago and it was a simple as plugging them in
I now have a new set and it's a real faff, simplicity no more !!!
why is it so difficult to clone!!!
How easy it is 😂
Video is slicky produced but it is NOT helpful. Suggest Devolo starts again and get the instructions correct.
The result of following these instructions is that your internet connection will crash. That's all. You certainly will not connect any new clones. If you follow the paper instructions in the box they differ from this video although they do have one thing in common, they don't work either. What a load of rubbish Devolo.
Your internet connection cant crash. lol You can manually set it up through the cockpit software. Mine works great.
DOES anyone knows how to turn off the wifi. if for one, i want to use only the lan cable and avoid having radiation in the room is it possible to turn the wifi off?
KGee Homie hold wifi button for 5sec.
thnx a lot man!!!!!
KGee Homie np ;-)