AK Interactive True Metal Review
Vložit
- čas přidán 24. 08. 2024
- AK Interactive True Metal Review
scalemodelmania
/ timeline
Disco Medusae" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
Volatile Reaction" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
Apply acrylic varnish before masking for other colours
Looks like most 'metalizer' products out there; either peel-off when masked or turn 'dull' when clear coated.
Some look extremely shinny when applied, but as soon as you drop any clear coat, everything goes south..!
For the ones I've tried; I just decided to stay away from metallic finishes...(my two cents)....
I appreciate your video reports...very informative.
thanks mate.
Learned much thanks just acquired brass iron copper am testing the brass is awesome again thanks
i am finding decals dont stick to it well.
Thank you
Thank you!!!
No problem mate.
Is GREAT i did some tests like you NOW the big part
for varnishing purposes before applying decals and washes
Hope you can help me thanks a lot
How long does it take to cure before you can handle it or go over with acrylics?
How do you apply this product....? Great video series, thanks
+BennyCFD Thanks mate glad you like the vids. i airbrushed the models in this demo but you can also brush it on. I thinned it with white spirit.
Is this stuff supposed to do anything that other metal paints can't? I just don't see any difference.
its much like buff-able paints. More for smaller areas then for replacing metal paints like AK extreme metal and Alclad.
Even when it is buffed over a small area, does it look any different?
i find it easy to use and the results are very good. Its also good for dry brushing to shine metal edges. May be a personal thing mate. Some people don't like it but others love it.
have you tried to spit polish it like you do to gp boots in the forces?
+steven thornton no i haven't tried that mate.
can i seal them with tamiya spray can ts-13 clear?
Not sure mate. I have not tried that.
Seal with acrylic clear. I use mr. Hobby clear one.
i was having cure problems on it , what primer did you use and how did you get it sealed ? It would help me alot if you can respond good sir. i bought 6 of em and i felt bitter i couldnt get any result.
Hi mate, i used no primer on some and tamiya grey and gloss black on others. I also used alclad black primer. I sealed it with very light coat of future and AK Interactive glass coat. This stuff will not dry compleatly as it is wax based and with always rub off when you touch it unless you seal it. Let me know how you go mate.
scalemodelmania CZcams has an amazing service , 5 months later your message came , Thank you so much for your answer , i will bring them out and try again on next project , i bought full set and place i bought didnt accept returns even the ones not opened, you sir saved me alot of trouble my thanks again.
No problems at all mate. Let me know how you go with them.
Are the colour change if i coated with clear?
can look like metal with a clear coat over it if you go to heavy. Just light coats and its fine.
What did you use to thin it for airbrushing?
+René van der Hart just some white spirit. you may have to play around with the mix a little until you get the consistency you like. Also mix it well to avoid any lumps.
Thank you