CZ 75 Compact Complete Disassembly/Reassembly
Vložit
- čas přidán 19. 05. 2020
- Showing you how to completely disassemble your CZ 75 compact or other manual safety CZ with firing pin block. Get Protected, Sign Up With Aura 2 Weeks Completely Free with my sponsor
aura.com/thegunbench
This has to be the most informative video on CZ 75 to date. Great job, keep up the good work. Thank you
The Mcarbo spring set improves the trigger immensely.
How’s the reliability on that?
Fantastic video. Thank you. Greetings from Spain
Just finished my CGW SRS kit on my 75B. Thanks for the demo. Wouldn't have figured it out myself. Manged to mar the frame a little doing the floating trigger pin of all things but oh well. Trigger is real nice with no polishing. Cheers!
Great vid, thanks for posting!
So very well explained, thank you
It’s Great, very detailed Nice tutorial.
Thanks!
Thanks , helped me out .
Great video thanks for sharing
I had to grind the the ends of the trigger roll pin. Maybe I fucked it up and it'll walk out, but fuck it. I'll just have to order the Cajun one then. That was the most frustrating thing of my day today.
Thanks man, video was a great help
Wish you were my neighbor
Great video!
Thanks man.
What punch size is needed to drive out the extractor pin?? Very detailed video..Thanks
เยี่ยมยอด
Is the safety supposed to keep the hammer from going back when its on and the hammer is down? With the hammer down and the safety on I can pull the trigger and the hammer will come back and the gun will fire, the safety will only work if the hammer is back and the safety is on and if i pull back on the trigger and let up then pull back on the hammer I hear it click if I don’t pull back on the trigger but push forward the hammer will go down. It’s a 2013 cz 75b compact L.
any light strike problems with the Mcarbo spring set?
Can you pls make a video p10C
I have one it should be in the disassembly playlist or look through the video list it’s on there
Great video, Thank you!
What size punch did u use to take out the pin? Please use American measurements...not MM....thank u sir....great video buddy.
Common punch sizes for CZs tend to be 5/64", 1/16", and 1/8". You'll need both roll pin and drive pin punches. Mayhew, Starrett, and Proto all make great tools. The firing pin retainer pin uses a 1/8" roll pin, but drifting it out you'll probably be better served with a 3/32" so the roll pin punch doesn't lodge in the passage. The 3/32" will drive out the trigger pin too, but a 1/16" will avoid the possibility of lodging the punch. The trigger pin set from Cajun Gunworks is much easier to install than factory and higher quality.
@@nomennescio6209 thank u! I was able to use my husband's weiner..it fit.
After how many thousand rounds are you supposed to completely disassemble and clean the CZ?
i do it every 500 rds.
We’re you running miles before filming? You’re probably out of breath while breathing.
CZ 75 Compact DOES come in decocker style. It is NOT a safety only gun.
The model called “CZ75 compact” Is only available with a manual safety.
@@tamagotchi64 mine has a decocker
@@tamagotchi64 czcams.com/users/shortsoE5xG_vFuQg?si=O5dHISvQCioYnyOu
poor video // no time stamps i disagree