Hoover Spin Scrub Brushes not turning

This is a quick video that will walk you through how to diagnose the Hoover Turbine assembly. This part is involved in dispersing thee we water and turning your Brushes
Monroevacuums.com
Previous video - My Hoover power scrub is leaking #hoover
• My Hoover power scrub ...
#hoover
#shampoo

[@marshalnink2236]

Thank you for this!! With your help, I deconstructed the assembly, cleaned up a bunch of rust, I seized the fan, and everything started working again!

[@monroevac]

Excellent- comments like these make the effort worth it. Thanks for sharing

[@JMacklin724]

Thank you so much for this video. I bought my shampooer a little over a year ago. Used it one time, disassembled and cleaned it for storage. Got it out last month and brushes wouldn't turn at all. Just like yours, the fan was locked. Thanks for helping me save my 200 buck investment.

[@monroevac]

Yes!!! That’s why I do this. Thanks for sharing .

[@cgtrademark]

You're awesome literally had this very problem. Thanks to you it's finished. Keep it up, I love the energy you had in the video, I didn't even realize I was really captivated until the middle of it when I realized I should start fixing my own haha

[@monroevac]

Thank you Im glad you enjoyed it

[@zach4384]

I've seen three of these in my neighborhood at the curb. I grabbed one for parts. That turbine is junk. I have taken it apart to clean it and free up the bearings several times. The pump works great through. Makes a great unit for only cleaning furniture with the accessory hose. Just remove the handle assembly and tubbing and just use it for suction and apply your own solution for scrubbing.

[@monroevac]

👍🏾

[@mechengineer4894]

This is an issue when there is no physical connection transmitting torque and mechanical energy via a belt or gears and you're sacrificing downward pressure of the brushes. Next time you have the cleaner on the carpet, see how easy it is to push the brush assembly upwards. There's no resistance whatsoever. It's like using a manual scrub brush to clean a surface. You push down harder if the surface is filthy. The only pressure pushing downward of the machine is the weight of the brush assembly which is nothing. The result is a loud machine because of the turbine that does not clean very well.

[@LLStacheLarry]

Good video. Thought you would show putting it back together. I know you are working with one hand.

[@monroevac]

It’s in a previous video - My Hoover power scrub is leaking #hoover
czcams.com/video/1Nyq7IemdaM/video.html

[@LLStacheLarry]

@@monroevac O okay

[@rv3925]

I have a similar machine and the brushes will not spin. I followed the procedure you described but the brushes will not spin under power. But they spin freely when I turn them by hand. Any suggestions?

[@monroevac]

its possible that its the turbine assembly

[@cherylboyd5548]

Hello that's my problem with my shampoooer the solution is not coming out I think it's clogged can I take the back off the water bucket? Help

[@monroevac]

First test the water tank press the insert tote bottom of the tank. See if the water pours out when you press. If it does then tank is probably not the i issue. Leo check the trigger . If the trigger presses down the we move to the next thing. See all my videos on the subject. See my Hoover playlist

[@happycarrot8166]

I got it to spin before putting the cover back on, but once i put the cover on it doesn't spin! What could be wrong?

[@monroevac]

Check for a clogged filter in the front cover