How to Install the Cadet 3 Décor Toilet

The Cadet 3 Décor toilet features smooth lines and a concealed trapway adding a sleek appearance to the bathroom. This two-piece toilet is easy to install for an instant update. Follow these simple steps to install you Cadet 3 Décor complete toilet.
Tools:
Masking Tape
Screw Driver
Steps:
1) Place T-bolts in floor mount and screw on retainer
2) Use tape on the floor to assist with aligning the toilet
3) Firmly apply the wax ring to the base of the toilet
4) Apply weight evenly to the toilet bowl and set on mount
5) Hand tighten the bolt-to-floor knobs inside the bowl
6) Place bolt cover onto base of the toilet bowl
7) Place the Tank to Bowl Gasket on the bottom of the toilet tank
8) Feed the water supply hose through the hole on the top of the toilet bowl and attached to toilet tank by hand tightening
9) Set toilet tank onto the toilet bowl
10) Tighten handles alternately until the tank contacts the front and back of the bowl achieving china-to-china contact
11) Using a screwdriver, attach the toilet mount to the bowl
12) Attached toilet seat to the mount
13) Turn on water supply
To learn more about the Cadet 3 Décor Toilet, please visit: www.americanstandard-us.com/b...

[@Ss31994]

Easy toilet to install

[@BTRPlumbing]

You should install your 1990 Lexington instead!!!

[@erickmorton8085]

This is the worst design of a toilet I have ever seen you would have to take the tank off just to replace the fill valve it is a dumb design