Video není dostupné.
Omlouváme se.
INSTALLING A TUNER ON AN ATV, RJWC CAN AM 1000 XMR
Vložit
- čas přidán 30. 04. 2018
- Don't let anyone tell you that these tuners are gimmicks, they make a huge difference if you are either running a top quality exhaust system or even for atvs fresh out of the factory.
A lot of these new high performance ATV and UTV's are running lean right out of the factory meet emissions, so if you install a tuner you have the ability to adjust your fuel settings from low to high range which is very important. This machine was popping a bit right from the factory and especially after I added the RJWC full exhaust system. I added the tuner and adjusted the fuel slightly and bam! No more fuel issues - and more power!
To buy the RJWC tuner and exhaust please go to our website at: powermodz.com/496-exhausts
Don't let anyone tell you that these tuners are gimmicks, they make a huge difference if you are either running a top quality exhaust system or even for atvs fresh out of the factory.
A lot of these new high performance ATV and UTV's are running lean right out of the factory meet emissions, so if you install a tuner you have the ability to adjust your fuel settings from low to high range which is very important. This machine was popping a bit right from the factory and especially after I added the RJWC full exhaust system. I added the tuner and adjusted the fuel slightly and bam! No more fuel issues - and more power!
To buy the RJWC tuner and exhaust please go to our website at: powermodz.com/496-exhausts
So where's the video of you guys going over to programming of that programmer
Probably one of the best how to videos, keep up the good work!!!
Handy video bud, really handy how you actually pointed out the injectors with a light. On the 2019 Renegade 1000XMR removal of the connections is quite a bit more tricky but non the less your video was a big help.
Thanks for the video, it helped with a ton of headaches
Thank you, heading out to install mine now
Holy moly, when you stand behind that quad it looks HUGE
It is big! I pulled an SUV out of the mud with it and the mud tugger rope
@@PowerModzOfficial hello i have a renegade 800 2008 what the power commander i need ?ejk dobeck .power commander v or what my bike its lean little bit
nice vid your so awesome I wish I had a 4 wheeler
Did you make a video of how to adjust the fuel tuner
Haha it took me so long I almost broke my fingers trying to squeeze the injector clips off.
Is there any performance pipe that you tested that isnt so loud I have an 18 renegade 1000 its really chocked up but noise is an issue where I ride thanks
Hi Power M, I have bought a fuel box but are unsure of the settings you can do with it and when to do it with kind regards Robert
Who needs a Clark skidder when you have a mammoth like this.
Did you made a video of the snorkel install. Thanks
What kind of settings should i do on the optimizer but still keeping the original exhaust? I use this on Outlander xxc 1000R on full power with rjwc exhaust but on the original pipe,the optimizer is cutting the throttle at half. Thxxx🤟
I have a 2017 brute force 750. Which slip on pipe and tuner should i use?
are these tuners waterproof? or should it be put in a pelican case or something?
why are you not putting dilectric grease on connections??
Does these tuners come already maped so you just plug it in and go?
Does this tuner remove the speed limiter?
Should have slapped on a Power Commander 5, also controls ignition timing curve.
Just curious, been seeing people say that the rjwc exhaust packing breaks down and the exhaust basically becomes junk after a yr or so?
Does it increase speed & power with an aftermarket exhaust
Do you sell the slip on and the programmer for a 2020 sportsman 570 ?
Im in the market for a full exhaust rjwc if i have the dynojet tuner will i need to still buy the rjwc tuner.
4:25 my favorite comment.
Would it be possible to install one of these tuners on a bike with the stock exhaust? Even like you said, these things are SOO lean from the factory and I really want a tuner to stop the overheating and popping. I think eventually I would go to a slip on exhaust system, but for now I think if all I need is a tuner to richen up the exhaust that would be the best thing to do. Thank you guys!
yes for sure
These coast about £15K GBP out the box, how money do you have to spend to get the best out of them, the mods list is long and very expensive, just wondering what the final build cost actually is. . .
If you come Thunder Bay ways let me know, set up a ride with a few other fellas and shred some power lines!
Bc of that RJWC. Controller I had to have my 2017 motor rebuilt bc it lost compression and only running on the rear bank
did they tell you it was because of the tuner?
Hi , I order outlander MAX PTX 2019 this week and Can Am slip on exhaust singel as well .do you Think its need fuel controller or no . The dealer almost says no need !!!
Gladiator Al Mousa can am has designed their quads for the can am yoshe slip on exhaust so you do not need a fuel tuner but it may boost performance but it’s not needed
Aussie Honchar thank you for the reply yes I fixed and almost drove 400 KM awesome sound and beast bike . But the fun parts the Exhaust Yoshimura have no place for Oxygen sensor I have to make my one one . 👌🏽
Awesome man, you willHave to do the same? ToThe brute force , I take it?
the brute force is carbureted - we put a kit in it.
Can u make a tire review? Best bang for the buck to the top of the line tire.
working on it - those crypts rocked in the snow/mud thats for sure
can i use a 100r tuner on my 570 xmr
Yes potentially
I got just a skip on for my 2017 Sportsman 1000. Sounds sick. I bought the tuner but the injectors on the quad are sooo hard to get to. I managed to get 1 but the second couldn’t be done without taking shit apart. So I aborted.
Your best video is hands down your lean steer Elan! The reason its the best is because you had fun in that video. Other videos are fun too. But this one seems like it's a Hassle,.... And forced...... Blah blah blah, it turns viewers away when you're not enoying it.
Jason Coleman just a little tired, it was about 9pm after a long day of moving stuff from the bunker to the new shop
That ski-less elan Was so much fun though!
Hi my Friend i need to built my Honda Atv tool
What tuner is that send lino
I have one left if you want it!
@@PowerModzOfficial is it for the 850 xmr 2022
Second
first
SINGLE SOUNDS BETTER
Bullshit dont need a tuner come on
why do you think that?