Step by Step Guide to Install Nissan 300zx Late Style Injectors on Early Style Fuel Rail (Episode 3)
Vložit
- čas přidán 13. 06. 2024
- In this episode of the complete overhaul for my 1990-1996 Nissan 300zx, I go over how to upgrade early style fuel injectors to newer style injectors. This upgrade is to simply keep things simple when it comes to the fuel system. Early style injectors are phased out of manufacturing so this upgrade is a great one to do. The z32 has a specific kit made from z1 motorsports which makes this modification very simple and easy to do. I hope you enjoy the content and don't forget to leave us a comment!
Products used:
-New style NA injectors
www.partsgeek.com/gbproducts/...
-Z1 New style injector adapter kit
www.z1motorsports.com/z1-prod...
-Early style fuel rail to plenum seal
www.z1motorsports.com/z1-prod...
-Early style injector lower o-ring
www.z1motorsports.com/fuel-ra...
-Z1 fuel line kit (8 hoses)
www.z1motorsports.com/z1-prod... - Auta a dopravní prostředky
Ultimate 300zx channel
The reason those screws are so hard to get off with a Phillip's head is that they're not actually Phillip's, they're JIS (Japanese industrial standard). Learned this the hard way.
Btw, you guys are awesome. I watch all of your videos, they are very informative and detailed. Where I once had cold feet embarking on such projects, I feel confident with you guys in my corner. Thanx! I hope I don’t destroy my Z so wish me luck.
Good luck with your build and just take your time! Lable everything
Goated with these step by step vids for the z🐐 not enough z32 content on the tube !
Extremely helpful vid! And the timing of you making this couldn’t have been any better for me! THANKS! 🔥
You're welcome
Nice guide Z-bro! It is time for me to upgrade to an early style! 370cc compare to 555cc huge difference!
can't wait to start on all of these things, just ordered all of the oem stuff for the 120k kit from z shack!
Awesome!!!
Nice job I’m really enjoying these videos! I hope you continue to make more content goin more in-depth with it. Not that all of us need it but it definitely makes the video more interesting! Keep up the good work
Thank you!
Not a problem man!
Awesome video, good job 🙏🏼🙏🏼🙏🏼
Thank you!
Awesome video man im doing my 555cc inj on my Z. You should do a video on some more deletes. Im also doing hicas delete
Deletes coming up next!!
👌
Nice vid. One question. Why the used engine oil on the o-rings? I use Dow Corning 111. It works well for me, and it's not supposed to break down rubber over time like oil tends to do.
I've always just used oil and never have had an issue
Awesome video! My plenum is currently off for injector replacement , I have an early style engine, can I use the new style fuel rail/injectors or do I need to get an adapter kit and use the early style fuel rail ??
Thank you for the support! To my knowledge you can use an early style fuel rail with new style injectors via injector kit to a early style engine. But I don't know if you can use a new style fuel rail on an early style engine. I would do some research on twinturbo.net to see if that is a possibility.
its not a phillips that is a problem. those are jIC screws and use a JIC screwdriver. im sure the screws are still tough to get out, but you are less likely to stip them if you use the correct screwdrive....
whats a good decently priced brand for oem fuel injectors
nice video what brand injectors are those I bought my z last year and looks like I may have the same ones. all I remember the guy that sold me the car was that he put new 740cc.
Those are AUS I believe
I wanted to get bigger flow fuel injectors, can I use any brand ?
When re installed did you have to shave plenum for injector one? Every where I’ve looked says you have to. Seen a comment above said you didn’t but you hadn’t put the plenum back on. Awesome videos! Getting ready to do this to mine, have an 89 300zx tt JDM rhd.
I did shave the plenum!
@@ZBruhzchannel thank you! You wouldn’t happen to have a video of that anywhere? Super nervous about shaving the plenum. I have bad luck and feel like I’ll start shaving it and my rear hatch glass will explode or something 😂
@@aarongraybeal5503 I don't but there are write ups on twin turbo.net it's very simple. I shaved mine in a half moon shape to keep it uniform and clean. I wish I shaved all I've them but I was in a crunch to get this done
Can I swap it the lates fuel rail in to a early engines vg30dett fue rail..?
Does anyone know if code 51 means the injectors are bad or is there anything else that can trip it
Would this be an upgrade for the 1990 TT?
Hey zbro’s, I’m about to change my fuel injectors and I was wondering about the egr valve: why is it a good idea to delete it and will the engine pass a smog check after the delete?
Deleting the egr just makes your car run cleaner since the system can get clogged over the years. I don't know if it will pass smog without it, up here we don't get tested on antique cars
this is a helpful video man! do you know if this adapter set will work on a vg30e maxima engine as well? i have the feeling that at least 1 or 2 injectors are on thier way out since it doesnt run 100% smooth and the spark plugs on cylinder 4 and 6 look like they run a bit lean.
I would contact z1 motorsports to see if it is compatible or not
@@ZBruhzchannel thanks, i send them a pm over thier instagram. 👌
@@99Lezard99 I would call for sure instead. They aren't really responsive on social media
@@ZBruhzchannel im from germany tho. 😅
@@99Lezard99 I see, I then would just email customer service!
fyi if its not simplegreen xtreme it actually causes corrosion
What did you torque too? Had mine done a few years ago. Got the motor torn apart again, to do more maintaince and almost all the injectors retainers are loose. How can i keep this from happening again?
Tbh I just make them tight by feel. The fsm should have torque specs
Wow $81 for qty6 injectors ? Are you familiar with these specific ones? I Need to get a set myself and before I do so just want to make sure that the ones I get are going to last.
Unfortunately the deal is over due to it being an overstock item
Did you have to grind away some of the plenum to get the injector 1 to fit? I heard that's a thing.
No not at all. The plenum is off as we speak. If you want to do the swap of injectors while the plenum is still in the car then you will need to shave the plenum
Yeah I just put everything back on only to find that fuel injector #1 connector is being partially blocked by plenum. So I can’t connect the connection to the fuel injector. 1990 NA 300.
which injectors capacity is best for non turbo z32 ?
270cc
how these injectorrs have worked in you z so farI? I need ito replace the injectors in my 300zx too
Great, had a hiccup with one due to pinched oring, besides that they have been good so far
How are those fuel injectors hanging in from parts geek ??
I had one that stopped working about 1 month in swapped it out and the car has been running great since! About 3,000 miles on them now.
What brand injector did you go with?
Beck/Arnly
Where’s episode 1/2
Man, those injectors are so cheap! But are they any good? Looks like they are available again
I had one issue so far, it was the third day driving the car one injector was causing a miss fire. Luckly it was cylinder 1 so easy pop out and replace. When you get them in the mail just ohm them out before install
Z-Bruhz thanks for the reply!
First
No need to buy a new harness?
Nope, just new plug connectors to splice in
@@ZBruhzchannel thanks man thats going to definitely save me some cash lol
@@galacticog5499 no problem!
@@ZBruhzchannel so you did end up splicing instead or trying to re pin it? asking because i just did this and she wont start and im not sure if i wired it wrong with the old harness or if my Cas harness has stopped working.
@@vqgav7680 spliced new connectors on