Adam Savage's One Day Builds: Painting Iron Man Armor!
Vložit
- čas přidán 6. 04. 2021
- What is Adam's favorite part of making? The paint, of course! Wanting a beaten-up, shiny metal finish for his Iron Man Mark I suit, Adam applies a gloss black undercoat, adds liquid chrome, then seals it all with a clear coat. But the job's only half done; Adam needs to wait a week for the paint to cure before he can start weathering (which will be another One Day Build)!
FULL PAINT SHOPPING LIST HERE: amzn.to/2PzsHb4
Molotow Liquid Chrome: amzn.to/31PxtDx
TAMIYA Acrylic Gloss Clear Blue: amzn.to/3ww1PZX
Golden Heavy Body Acrylic (Raw Sienna): amzn.to/3wxMRTo
Golden Heavy Body Acrylic (Burnt Sienna): amzn.to/3wBEiH1
Golden Heavy Body Acrylic (Yellow Ochre): amzn.to/3sWr9Gz
Alclad II Lacquers Gloss Klear Kote: amzn.to/3ww46Et
Behr Gloss Black Paint and Primer: www.homedepot.com/p/BEHR-12-o...
Full playlist of this Iron Man Mark 1 build here: bit.ly/3plVmwi
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Shot by Adam Savage and edited by Gunther Kirsch
Join this channel to support Tested and get access to perks:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): czcams.com/users/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Set design by Danica Johnson / saysdanica
Set build by Asa Hillis www.asahillis.com
Thanks for watching!
#AdamSavage #OneDayBuilds #IronMan - Věda a technologie
FULL PAINT SHOPPING LIST HERE: amzn.to/2PzsHb4
Molotow Liquid Chrome: amzn.to/31PxtDx
TAMIYA Acrylic Gloss Clear Blue: amzn.to/3ww1PZX
Golden Heavy Body Acrylic (Raw Sienna): amzn.to/3wxMRTo
Golden Heavy Body Acrylic (Burnt Sienna): amzn.to/3wBEiH1
Golden Heavy Body Acrylic (Yellow Ochre): amzn.to/3sWr9Gz
Alclad II Lacquers Gloss Klear Kote: amzn.to/3ww46Et
Full playlist of this Iron Man Mark 1 build here: czcams.com/play/PLJtitKU0CAegriOw97VIK2Ci-zs6HKP4B.html
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
first
Hey adam i like ur content ,
like if u agree
It looks so good!! Shame it doesn't work like the one on savage builds
The real question is: Where are the Raptor suit vids? And where is the final video on it :(
One thing missing the core
1:24 I love how Ironman's head keeps agreeing with everything Adam says, lol.
I believe the best way to describe Adams props isn’t replicas, it’s remixes. They have the same lyrics, but they carry a different tune.
44:26 Painting dance when you summon gods of painting and ask them your paint dries faster! :)))
It makes me happy to see how happy he is painting :D
I LOVED those masking jump cuts! Hahahaha! Well done editor 👍 not sure if it's been said before but whoever edits these videos does a bang up job every time
Came here to say this :)
This video was edited by Gunther (Kirsch)!
Can we just have an infinite loop of Adam pulling masking tape from the roll. Idk why it was so satisfying how that footage was cut
@@Zebra.Lionfish Supercut alert
I love how Adam explained how the concepts from graphic design and figure painting apply to prop painting. Fascinating!
Does Adam have some kind of crazy ceiling extraction system? The paint particles are going straight up.
not a crazy one, in fact, I think the dust extractor mostly pulls from the floor. Probably got a good size fan up there though.
He does. He’s shown in it waaaay back in the early days. It’s pretty legit. One of those inline turbine fans iirc
I was thinking the same thing. was he just using his dust extractor or does he have a fume extractor. Also, how doe he keep overspray off of everything?
hopefully he can build iron man suits for all the Democrats' slaves to escape their holding pens at the border and make it back home safely
@@zangetsu6638 wtf??
OH MY GOD ADAM!!!! A jigsaw with a small onehanded bar clamp is the BEST paint shaker for little paints in existence. I've tried basically every kind, the medical kind, nail polish shakers etc. a jigsaw can't be beaten and all you have to do is grind down the bar of the clamp to fit!! If ever there was a tool tip/ an actual one-day build it's this.
Im literally just on a coffee break from painting my 3d printed iron man mk3 armour and this video popped up haha good timing 👍
Yes!!! Give that Art History Shout Out! Makes my art historian heart happy!!!!
hey Adam, honestly really enjoy watching you work while I get my own homework done. Thank you for being you.
Amazing paint work and I love the foam butt plate!
They really should reply to you!!
Adam as the Bob Ross of prop making again. Just a Happy little drive belt 👨🏻🎨
Rhythm is a dancer. There’s rhythm in everything you do. “ I knew you can dance” I can only imagine. Go Adam go Adam go Adam. And you killing it.👍🏽👍🏽👍🏽. Oh yeah nice paint job. Thanks.
Your philosophizing on the process of art & composition makes me want to paint all of my BattleTech minis
A man like DaVinci would weep in pure joy looking at JUST your notebooks and sketches. You may not be a career oil painter, but the Samaritan is clearly be a masterpiece.
Shout out to Gunther and the top notch tape cuts. Im guessing the staple gunning cuts as well. *chefs kiss*
Every time Adam's door bell rings in any of his videos, am I the only one that starts singing "Let 'Em In" by Paul McCartney and Wings? :-)
I lean more toward "Who Can It Be Now?" by Men At Work. ;-)
Adam hardly has any scar on his finger at all from last year's lathe incident. If this gig doesn't work out, he would make an excellent paramedic.
I couldn’t stop laughing when you spent 30 seconds dancing back and forth across the screen!
Soundlessly
Someone has to make this in to a gif for us
What song do you think it was. I think something by Beyonce lol.
I think he was dancing to Dora the Explorer singing, "We did it! We did it! We did it! Yay!" Lmao
I deeply enjoy the editorial choice of it being completely silent.
Adam is my kind of Bob Ross. Love watching the process!
This is by far my favorite project you’ve done on the channel. Keep up the good work!
Can’t help but think the gentlemen who gave the TMNTs their namesakes would also marvel at your work as well, so don’t short change yourself.
Do you want everything in your shop to be silver? Because this is how you get everything in your shop to be silver. Sweet!
Also, what air pressure is he running on that Iwata brush? Shit blowing everywhere...
I'm glad I'm not the only one. A box fan, and an air filter go a longgggg way.
@@troyboyd7984 I built an air filter using an "air mover" type blower fan mounted inside a MDF box. With a furnace filter on one side. It moves way more air than a box fan ever will.
Adam totally needs to do a 1-day build for a paint box. Useful and great to have around the workshop for those dirty tasks
@@micahgin I think there are regulatory issues with building a paint booth. Maybe just a fume hood or something would be sufficient. I know Adam has addressed overspray in the shop before, but that silver paint seems excessive. Of course it could just be that the silver creates more visible mist due to its reflectivity too...
The driving belts for legs are inside-out :D
Damn Adam, you need a paint booth! even with a mask, your shop is coated in paint dust and once you remove the mask you breath it in. Maybe a one day build for some kind of modular paint booth? We all want you to be around for a long time inspiring all of us.
Love the "Head nod" of the suit at 1:35 :-)
Still miss the myth busting days. GOD BLESS.
painting and aging stuff i build totally equals the step of putting varnish on a workpiece of wood i made.
When the grain starts to pop i feel each time like i am rewarded for all the prior work :)
I love you, you inspire me. I'm currently making an ironman mark1 suit for my son. When it's done, I'll update it for you to see. Thanks for the great inspiration.
When you did the Stark ind. stencil you should have change it to Savage ind. just to see if anybody would notice it.
Speaking of, every time that Savage Industries logo pops up in The Expanse, I do a little hop of joy. Referential logos are always great.
I do love the longer build videos, you are able to both show the process, and discuss the concept of the process much more clearly...thank you
I loved the editing with tape at 32:49 Looked like magic!
Man I loved the finish you got on that helmet. I'm glad you brought it all up to spec.
A one day build of a painting tent would be cool.
Nice seeing Adam finally wearing some respirators when working
Can't help but think about the Falout power armor when watching this build.
I love painting videos. Always a surprise how it will turn out.
I got flames painted on my car about 40 years ago. It was so cool when the artist peeled the tape off.
Amazing. I'm so excited to see this one completed. And I hope I get to see Adam and this amazing cosplay at a Con in the near future! Fingers crossed...get your vaccines, everybody!
Holy Woo. How have i not watched Adam before ? Mea culpa ......Also I now have and irrational desire to use Adam's recipe for gorgeous chrome on my transit van .........[must resist]
The dance routine was the best!!
Adam, you talk about graphic design a lot in your videos - Contrast and composition! My clients always wonder why I design everything in B&W first before I go looking for color. I've been doing a lot of scratch build model making lately, and I'm looking forward (also dreading) the detail work. Since I do all my models from scratch mostly, I'm going to be doing all the detail work by hand; old school, no 3D printing and no printed decals. These videos are so helpful ; ) I would love to visit your shop!
Oh man it looks like you have a fog machine running at the same time! Adam you definatly need a air filter system!! And maybe be al little more precise with the airbrush would help too ;)
I was thinking the same thing! Especially when we started spray painting the base coat. I thought "that's probly a good job to do outside isnt it?" Lol
Same. Omg. I couldn’t help but fret about all the overspray. This wonderful man has got such an amazing shop, and doesn’t have a spray booth or at least go outside. Fab paint job. Definitely inspirational!
I think I like this more than the actual Iron Man armor, this is so robust. Good to see that chrome paint as well since I'm thinking of using it in some project. Great video!
for a quick paint mixer for those smaller paint containers, take an old jigsaw and jerryrig a quick grip clamp to it. It'll shake the shit out of those smaller containers and I've found this works really well with the paint that I use.
Now this is something we can all enjoy!
The shimmy dance at 44:42 made my Friday so much better.
Digging the Love Actually High Grant dance at around 44 minutes.
Make that 'Hugh Grant'
The thing i love about Prop/costume design is that i can follow this build from start to finish, Know for certain that that thing is not made of anything more than some resin and plastic & yet my brain still goes "Nah, is Rusty metal"
The rule of thirds in composition!!!!!! Where are my art history peeps???
brilliant , love the helmet nodding with you as you discuss the weathering as your favourite phase
Adam needs a lab vortex mixer. Those things are beautifully simple: just push your vial onto it's rubber top and it jiggles it vigorously, mixing the contents. Don't even have to turn it on and off.
Exactly what I was going to suggest. Those Molotow pens would work beautifully with one!
With all that overspray the Cave must be riding eternal in Valhalla - shiny, and chrome
Aside from the build I love Gunther's editing, the torso back masking tape pulls were great. Nice to see everyone having fun making these.
Also, I'm glad I learned about Alclad II from you. Rattle can clear coat dulls the crap out of chrome paint. The Alclad does a great job of preserving the shinyness.
This is so frickin cool man! Adam one day it be awesome if you did a Model 1 Mark III from the comics. You know the golden armor one. That be so dope!
Love your work you make me a happier person everyday. My question is what was your most award moment on mythbusters?
From this point forward ALL Tested videos need an Adam=dance-break!
Even the model agreed with you the nod said it all lol x
LOVE the paint-drying Dance Interlude. Old man's got some moves yet!
All I can say, is never change, and keep the videos coming.,....Fab job...
Your little celebration dance at 2/3rds into this video was F*%^in' Awesome :-)
Man our spring thunderstorm ⛈ blew up bonk put me out. Now I can finish Adam’s painting the mark one iron man costume. I had a funny thought you answer the door to scare off would be what nots and the delivery 🚚 carrier.
My favorite part is the pain, it just all COMES together!
Finally! What we've all been waiting for. Great midweek boost!
I need to try and master that masking technique of pulling off a strip and it suddenly appearing attached to where you want it 😊
Wow! That cloud of paint particles is nuts! I think maybe this video should've been preceded by a spray booth build lol 😂
Nice one adam, look forward to the next weathering stage
It would have been super awesome to make the gears/belt for the leg joints actually move. Like cut the plastic molded ones off and replace them with a real gear and belt assembly.
9:17 There is something called a Vortex mixer which is primarily used for test tubes but work great for mixing paints. I use a cheap nail artist one for about 40 - 50 dollars for one for mixing my miniature paiting paints.
That dance sequence . . . WAS EPIC!!! LMAO!!
man you need to make a foldable paint booth - that must be a good one-day build? that airborne stuff is going everywhere
We were JUST talking about that in our Monday Tested staff meeting!
@@tested good to hear 👍😊
I get pretty good shiny chrome with just the cheapo chrome rattle-cans and then give it a very soft polish afterwards just to make the surface smoother by getting rid of spray dust and shine up the reflective particles in the paint.
I spray Molotow chrome ink all the time and never thought of using lacquer thinner. Great idea, will give it a try next time.
Tried the stencil technique, worked great. Thanks!
This movtivated to paint my stormtrooper armor, sometimes you just need another maker to inspire you enough to get some stuff done, thanks Adam!
dude, you need a one-day-build paint booth!
I love watching Adam work when I have the video running at faster than 2x speed. He becomes the Flash.
You should really consider investigating a newer method of chipping done by modellers, you use hairspray as an intermediate between your base and final layers, and use water to wear the paint away to form your chipping patterns, very flexible in how little or how much you take off. Only thing is you'd probably need to use tamiyas acrylics not rattle cans. May be too much time considerations, but the fidelity it grants you is amazing.
Beautiful work Adam.
quick idea for your paint shaking problem that might help. Just take 2 strips of wood, drill out impressions that fit your paint tubes. Rig up a couple screws to make it into a clamp, then put a center hole on the bottom strip, and attach it to the top of your rock tumbler. take you about 5 10 minutes to make up
Hyperbole aside, I do think Adam is slowly approaching a point where he may be considered as an important artist. His body of work seems to be growing exponentially, as did many of the so-called 'masters' until specific works were considered as masterpieces. Built on a solid foundation of effort and learning.
It looks so good!! Shame it doesn't work like the one on savage builds
It doesn’t look the same because the one on Savage builds was a mk 2 and the mk 1 here on youtube is dirtier and beat up just like the in the movies.
... Yet...
FANTASTIC work, as always!
I'm not gonna lie, i'm down for shorts of Adam just dancing in the cave
Wow this is amazing what a genius
I always learn something from your videos. Great stuff, thank you
Universal Small Size Paint Shaker One Day Build confirmed! XD
You can use jam or peanut butter to mask out chipped paint areas, just wipe it off once you the paint is dry, you get a more natural result than with masking tape ! Only works with spray-paint/airbrush
Amazing knowledge and love of detail and design !!! Well done this suit is awesome !!!!
44:27 Those are some SAVAGE dance moves.
Love it, reminds me of fallout power armor in a way!
Oh if only that was how tape was dispensed. And thank you that really put a smile on my face.😂
Good project for the cave is a paint booth!
That liquid chrome is amazing stuff to be sure!
You airbrushed it 🥇🔥we have to look for all trick the eyes looking from all directions we look for regularity i was airbrushing clouds an i had to make it irregular.
You sir are the Bob Ross of cosplay! Cheers
Now I have an image of Adam walking the floor at Comic-Con as Bob Ross...complete with easel.
Watching the intro when Adam it tapping on it and the helmet is shaking I realized, it's not a costume. It is a life-sized bobble head
Amazing!