NUTCASE PUZZLE SOLUTION (In 27 seconds)
Vložit
- čas přidán 14. 05. 2024
- This is a step by step solution for the Hanayama Nutcase puzzle.
To get more puzzles like the Nutcase puzzle, check out the Puzzle Master website; www.puzzlemaster.ca/?a=816591
To watch me solve the Nutcase puzzle for the first time, click here; • SOLVING THE HANAYAMA N...
The solution itself is very simple however, it's very fiddly. Even knowing the solution, you have to get both nuts in the PERFECT position for it to open.
If you think you can beat my time, comment below!
Enjoy the video!
Timestamps-
0:00 - Intro
0:56 - Disassembly
4:42 - Assembly
6:37 - Tips & Tricks
It took me 5 hours to solve this lol tysm for a actual good tutorial
You've come to the right place... I hope!
You can actually align them in such a way that you can open it up without further turning the nuts
Which point do you mean?
@@RossDM There's an alignment where both nuts remain together on one side and the other side slides out completely. It's hard to describe without a photo, but it's similar to how you've done it. While in the same orientation as you have it in the video: the right nut is the same as you have it, but the left nut is positioned with the bottom edge of "Nut" in the same segment as "Case" on the right nut. If aligned properly the entire lefthand bolt will slide out completely and both nuts will remain on the righthand bolt.
Best channel
Finally! The recognition I deserve! haha... In all seriousness, thank you very much, that means a lot.
i trided it and it does
Hi, one of the barring pieces got flipped over when I was putting it back together and I was wondering if the puzzle will still work? If not, do you know how to take it apart.
Sincerely, Patato
I've not done this myself but I believe it should work in the same way. You'll just have to figure out the new positions you need to be in to get it to separate.
Good luck!
@@RossDM thank you
Supposedly it's also supposed to be able to spell Case-Nut, it's the third part of the puzzle according to a paper that came with the puzzle, I did it on a video😀
Haha you mean you swapped the nuts around?
@@RossDM even if you swap them around they still say nut-case, otherwise that wouldn't be a challenge, you gotta find a way to put them on upside down
@@coldclearkt .....ya by putting them on upside down.
@@ryantong5647 no it's not that simple, its complicated to explain but it has to do with the missing threading on the nuts
@coldclear2145 That's exactly what you do. You flip them around. That's what I did.
Hey man i allined mine just like you did and it didnt open. Ive tried this for abt 2 hrs and cant get it to open. What should i do?
So i actually solved it but i put one of the nuts the wrong way and now it wont open even when i do what you did
@@jt-cf8kr That's interesting... but you should still be able to open it.
If you managed to close it then you should be able to open it. It'll just need a different position to separate. Good luck !
My sister gave me this and it has been driving me nuts
Oh my gosh
The CZcams Bros Channel funny enough she gave it to me because she thought my schizophrenic mind would be able to solve it.
I just solved it yesterday it was a little confusing but was easy for me
Nice work!
Hey man I still can't do it even with ur video
Hey Elliot! This one is just super precise.
Make sure you're using the right marks and then just play around in with each piece. Think of it like you're trying to crack a safe... Very small movements and feel for each piece being in the correct position.
Good luck! Let me know how you get on.
@@RossDM I did it. Thanks😉
@@elliot0975 Awesome
Posted my under 10 seconds solve below!
it works
Awesome! Nice work.
Bought this Puzzle a couple days ago and I attempted it then just suddenly today I picked it up and it basically fell apart then I worked out the rest backwards to figure it out had to watch this just in case I did t break it.
Nice work, it's hard to get lucky with this one because of how precise you need to be.
It's also very hard to break it lol no need to worry about that
What happens if I get one of the bigger nuts off track and can't get it back on
I think I might have done something similar when I first solved this one. You probably need to push the two ends together, line up the grooves and turn the nut.
the little challenge of this puzzle is to swap "nut case" to "case nut" when you rebuild it.
Yeah, I've still not tried doing that. Is it difficult to do?
Could you help me?
My Nut Case puzzle won't come apart
@@AiZBlind Of course! Is it lining the pieces up you're struggling with?
@@RossDM yeah, I suppose I have been a little off in my positioning, but thanks for the help in the video as I was able to do it today
@@AiZBlind Brilliant. Glad it helped.
Uploading 2 angles of me solving in less than 10 seconds. Will post link.
czcams.com/video/optDnLmRQmM/video.html
27 seconds!!! Looks at the bottom right, 9+ minutes 😳
Mine got jammed when i was putting it back......
Did you manage to un-jam it?
RossDM - Puzzle Solving no I tried all different way to do it, but nothing works I think it’s broken completely now
@@ulugbekdjalaldinov7459 Oh dear...
bit late but i accidentally opened it in 10 minutes from just spinning randomly and pulling cause a nut got stuck
That's lucky
Got 13 seconds
13!? That's very fast. Any video evidence?
Proof or it's a lie
Mine got really stuck trying to put it back together so I threw it in the trash lol
Oh dear... are you getting a new one or just giving it up?
Rossdm. David t. I. Solr the nutcose in 5 secohds
Mine says level 6 out of 6 lol
It didn't work!
Hi Silja, with the Nutcase you have to be super precise. It has to be in the PERFECT position, which is what makes this one so tough.
Keep trying and eventually you'll get that perfect position.
Good luck!
This puzzle is only ranked a level 6 because the damn nuts keep getting jammed.
Yep, you've got to be pretty perfect in the alignment
solved it in 2mins by accident
Impressive
I got it in like 2 minutes
Well done
No way this is level six.. solved it in less than a half hour
None of you guys know how to solve this. you dont have to move nuts to both ends ..the nuts can be any in any position.....line em up just right and the whole thing comes apart... easy peasy..... no need to turn nuts to ends and turn one nut until it slides then move nut to end to allow space to remove other nut.... Just line up nuts in correct orientation and the whole puzzle comes apart... How does no one Not know this?????????i can do it under 5 seconds
It don’t work