FREE ENERGY WHEEL ~ Using Ring Magnets ~ EXPOSED!
Vložit
- čas přidán 28. 04. 2024
- Check out this purported "Free Energy Wheel" that was made using ring magnets that were removed from (7) junked microwave oven magnetrons, as well as some scrap parts & supplies I had laying around. There are a few of these "Free Energy Wheel" ring magnet videos on CZcams. Just as my other "Free Energy" videos, I duplicated this device in order to show my viewers if it really works as shown, or it is just another "Free Energy Scam". Hopefully this video will save people time and money. Unless YOU yourself have tried this, and have a video on your channel showing what you claim with every detail, then please do not post silly comments telling me what I did wrong. Enjoy the video!
Support the creation of new videos on this channel by watching the ads placed on my videos, shopping for items shown in my videos at the Amazon/Banggood links provided below, or by making a Paypal donation. All donations, big or small, are greatly appreciated. Thank you!
Amazon: amzn.to/2Lg902l
Banggood: bit.ly/2COi2P0
Banggood Flash Deals: bit.ly/2HBu9oq
(Affiliate Links)
Paypal link: paypal.me/electronicsNmoreYT
Bobby Tectalabyss: Thanks for your generous $5 donation!
Jeff Barr: Thanks for your generous $25 donation!
xrayjim: Thanks for your generous $25 donation!
Ryan Pedersen: Thanks for your generous $20 donation!
**My Video Playlists here:
bit.ly/2kEDBXD
**If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)** - Věda a technologie
***ATTENTION: The bearings used for this project are BETTER than the bearings shown in the scam videos. My wheel and upper magnets move SMOOTHER than the scam videos on YT. It doesn't matter how smooth, because the wheel will never continue to spin all on it's own. Please click the link below to see my Video Playlists. Thanks!
bit.ly/2kEDBXD
**For GREAT deals(Usually cheaper than EBAY) on neodymium magnets, Fidget Spinners, electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
**Try these money saving coupon codes: BGAFF7 or affiliate6 or elec or measure or HDWARE2 or WELDTOOL** or ask if other codes are available!
Thanks For Watching!
It can't works, since this model is clearly a scam. We can see that no effort have been put on the "stabilisation problem" of a full-magnetic dynamo. As soon as your system magnetif fields can find a stable spot to sit in, it will stop working. What I'm trying to figure out is a model that would induce a cycle in the system, where that stable state will be broke so the rotor is pushed to continue on spinning, and where that "break" requires far less energy to create than what the dynamo will produce... I wondoer if you encoundered a design that would be close to achieve this...
and still comment this ,how much time and energy you puttin in here. its so obviously... so sir ... just one question ? is free energy possible ? is it suppressed by oil and energy companys ?
electronicsNmore
electronicsNmore it seems that the magnet plate is slanted down in the other video. Possible that gravity will help it to spin?
the plate in the other video passes 3 or 4 magnets per rotation of the magnet up top. if you gunna "expose" something at least replicate it properly.
@Deborah Anne DeMarco
Very simple reason. I used ceramic magnets because that is exactly what the scam artist used, and that is exactly what I had access to. You would buy 13 neodymium rings magnets for $75.00 each for a scam?
Thanks For watching
Great video. As a former R&D Engineer, I appreciate the effort you put in making this.
Thanks Bill! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
czcams.com/video/ErpS7C4gUVA/video.html
An We Al can do so much more !
Yeah, I agree.
Thank you for taking the time to expose those pranksters. Such types are too numerous in CZcams. Any presentation that looks too good to be true or has the word 'secret' in its title should always be taken with a pinch of salt.
An excellent video exposing a scam. Your expose is greatly appreciated. You make it easy to understand the way the magnets interact for someone who has a hard time telling the difference between up and down..
Thanks for saving use time. Plus to realize how many low people get a kick out of wasting our time. I appreciate what you have done .
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/WmYVFpsWfBc/video.html
czcams.com/video/IjQu_hJv7UU/video.html
I've watched the video you referenced for your build, when I commented about the metal shroud hiding something the "inventor" got real pissed at me, made my day in fact. Funny thing, when you look up "inventor" in the Dictionary it never mentions "Scammers"
The shaft is extremely smooth. Lubed up real nice.
Inyourendo
Wow, am impressed you took the time to analyze the other video and experiment various possible combinations. That is a scientific approach. Love the video
Glad you enjoyed it! Please be sure to share the video link with others, and look over my extensive video playlists as well. Thank you
If all. The magnets on the wheel are facing up on the same polarity . But the other one set to repel it , it is then set to constantly repel the wheel , or am I missing something
You went wrong by putting every third one to attract , thus slow ING the wheel instead of constant repelation
Finally, a person with the brains and courage to call out fake claims on the internet. Thank you - you have loads of potential subject matter to debunk.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Other great videos:
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
sure! you guys are geniuses. But I have done these experiments and you can get it to work....but the key is in taking care to get just the right size and distances correct. And that result pruduces very little torque, but it is enough to get it going in the same way that magnets can light a bulb with, again, just the right set up, sizes and distances......also a lifter can be made using high voltage and very careful adjustments to distance and sizes.
The only thing you have proven is how much work you went thru to try and disprove something that someone else actually figured out how to make work
Thanks for the heads up, Bruce. So I guess this guy is yet another CZcams media mogul billionaire racking up revenues by producing evil content geared to do nothing but make himself money. I've unsubscribed and will avoid - not interested in making these people even richer. Besides, his content now features ads for Trump and the GOP - so shame on his scam.
@@mrbrucewayne631 Video. Or it didn't happen. Prove it. Engineers tend to be science minded and will change our minds with proof. Show your *entire* setup. Show the build process. If you can make it work and give proofs, you'll be richer than anyone by licencing the tech...
If you can't prove it, with full build shown, then it didn't work. It really is that simple
Sure, Bruce.
Thank you. Honest people are very rare these days. You did a valuable public service.
Be sure to share my channel with all your friends, and check out my latest video!
And earned some 4 million views as well. All of these plus the 4 million views of the scam videos are wasted minutes. So, 4 + 4 = 8 million views x 10 minutes = 80 million minutes, or, above 1 million hours wasted. This resembles some 600 man years of time gone down the drain due to the scammer and due to the good person here, trying to teach people a lesson. Well. In 600 man years, if these 1 million hours were spent well, and supplies were available, one can - comfortably - plant some 60 million trees (1 seedling per minute = 60 seedlings per hour)..
alexander macrae there's a lot of honest people just not very many that make these magnet motors
Jitesh
@@davidsvarrer8942 sir, you are incorrect, this vid is not a waste unless you missed the "exposed" in the title. did exactly what it said and informed otherwise ignorant people. so save yourself the time... why did you even come here if you already knew the info.
Glad I ran across your video, now I can watch the rest of them. We lose power a lot in the winter so trying to come up with something I can use to keep us at least some power.... being broke sucks...LOL. Thank you for helping others to not waste their money.
A battery backup + inverter would be the cheapest and easiest way. You can use wall chargers to charge the batteries and connect the inverter to your heater, a fridge and some lights at minimum to stay comfy through the outage. Used car batteries are a cheap way to make a battery bank. Lithium iron phosphate batteries are a better, but more expensive alternative. Just make sure the chargers you charge the batteries with are designed for whatever chemistry you pick. You would need enough batteries for the average time your outages are too.
Here I am watching this video in March, 2019. Timeless information. Very enjoyable. Thank you.
Glad you enjoyed the video Charley! Be sure to watch my other great "Free Energy" scam exposing videos below, rate thumbs up, subscribe, and share my channel with many others. Thank you!
czcams.com/video/8GkXl8mAvIQ/video.html
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/5lvFSQ2_4tg/video.html
czcams.com/video/BSdSDfOWbNs/video.html
I also enjoyed you correcting the fact that people are out there hoping people to the point of making them look like fools it is comforting to know that there’s someone like you out there to help out the rest of us
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
@@electronicsNmore brother you work can be corrected by arranging all the wheel magnets in a same pole manner and the pair of rotating magnets should be in one South and one North pole manner and this will work definitely
Of course it doesn't work. You forgot to include the hidden motor.
... and a battery to drive it!
+SayNOtoGreepns
+subductionzone 좋은 말 동생
I think it only works in the country of its origin. the gravity and earths field id different around the pyramids
@William Buffington Of course not.
It's great to see someone who will take the time to debunk crap like this! Thanks.
Glad you enjoyed and appreciated the video! Please share. Thanks
Great job. Tried to watch to the end but started getting dizzy. Rock on!
Glad you enjoyed the video! Please share. Thanks
do you use magnets in your cakes? Betty?
Uuuu my friend to spend time on your video takes a lot of wats
Thank you for taking the time to expose these scammers well done. Robert
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
these debunkers work for the government What if these devices actually work and the government is proving them wrong to save the oil industry from collapsing?
i like the idea of a magnetically coupled gear set... just goes to show, you can learn and get new ideas even from scam videos!
Frank Graffagnino right !! agree
Frank Graffagnino I had the same thought :D Magnetic gears, No friction no heat ;)
AkaMrJay There would still be heat and there would still be stressed points where the magnets are mounted.
nothing touche !! Ideas can be crazy and may not yield expected result and may :)
DarkAvatar1313 Also there would be a current generated in the magnets due to magnetic flux which would also create more heat loss!
Thank you for this design info! Brilliant..
You're welcome Denis. Be sure to watch my other "Free Energy" scam related videos below, and most importantly share my channel with others. Thanks!
czcams.com/video/FmcH_69Y_ZY/video.html
Denis Cesano u stupid or something
HI IM AMAZED THE NICE NEAT WORK THAT WAS PUT INTO THIS DEMONSTRATION THANKYOU
Your explanation of this scam is very concise and well organized. Thank you for going to all the time and trouble to expertly explain how the scam was perpetuated.
Glad you enjoyed the video! Be sure to check out my other videos, especially the 2 below, rate thumbs and share. Thanks
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
We Do Have things that Will an do work very well !
Thank you for sharing this video. You did a great job explaining the project. Thank you for exposing the scammers. Do not see no need for people to do a evil deed as scamming people.
mike80411 Glad you enjoyed my video! Be sure to share my channel with others, rate thumbs up, and check out my video playlists. Thanks
Thank you......... because I was so puzzled seeing that other guys video .I builder one like you have and it did not work
You're welcome! I have many great "Free Energy" scam exposing videos, so be sure to look over the playlist below. Thank you
czcams.com/video/FmcH_69Y_ZY/video.html
This is a pathetic design and there are much more advanced examples from 1800 let alone modern examples! Look it up- this is a shill video to hide simple fact and logical thought.
@@100canadianmaplestirup8 Send a link to a decent one, I'm sure there are ones that work.
You have done a great job for the fools like me who spend their precious time seeing these nonsense bogus free energy videos on utube nothing is free
So glad to hear that the laws of physics hold true. Dear old entropy keeps throwing a hammer in the best laid plans.
Yes the laws of physics such as the basic law that perpetual motion is physically impossible and the scammers playing on the part of the human mind that really wants what is'nt possible to actually be possible . So energy is'nt either created nor destroyed just changed forms so it takes another form of energy(mechanical) to produce(convert) to electricity. The only "free" energy I'm aware of is absorbing electricity that surrounds high tension electrical lines and transformers but They will bust You for stealing that and the sun which at least presently nobody is charging any fees for . I suppose that will come about same time as when air starts costing money.
This is a honest, man, God bless.
or a government paid one to make sure that it doesn't work in order to put people off the track.
It needs be said that the fake videos is all about the views, it a way to make a buck and most people know free energy is impossible right now, mabe in the future someone somewhere will find zero point but thats 50 or 100 years from now
Great job! I got reeled in on a few scams myself but slowly figured out that what I was doing wasn’t making any sense. What’s the joy for a person to fill the world with such lies!??? Keep up the great work Thank you.
Santa Barbara, Ca.
I dint see how we can't make this work. Sadly it's really simple in my mind I just don't have the resources to make it work
Good, video, true scientists are skeptics, you have a scientific mind. Congratulations for your objectivity and inventiveness!
Glad you enjoyed the video! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share my channel with many others. Thank you
czcams.com/users/electronicsnmoreplaylists
Great thanks for sharing your observations
Philippe Doucet Glad you enjoyed it! Be sure to check out my latest video, rate thumbs up, and share. Thanks
Very interesting! Thank you!
Glad you enjoyed the video John! I have MANY videos that cover a wide range of subjects, so be sure to look over my video playlist below and most importantly share. Thank you
Well done. Well presented, clear and concise. Keep up the good work.
Nice work. You can prove that magnetism is actually a form of "energy" and it is in fact perpetual, but with a mechanical device energy is always dissipated, and entropy will always beat you up. There are proven devices such as Tom Bearden's MEG , which produce electrical energy without relative motion.
I hear all this talk about it won’t create enough energy to be efficient.... lol we don’t care about efficiency we can about function, when you can function you can improve on efficiency 😂 if it charges your 12 battery system and doesn’t use another power source with minimal moving parts then you have something worthy of charging your phone, led strips even if it only spins 24 hours and I have to give it a push it’s still free what did it cost me to spin it by hand to get it to run another 24 hr cycle except my own physical energy 🤷♂️
Seems like it could have a number of potential applications, it could help improve energy production in turbines, or you could use superconductors and low Temps to create zero friction. 8 had this idea using just 3 magnets back in 2005, using 2 positives and one negative, that's why I looked this up
@@uncannyvalley2350 and how much power does it take to continuously cool something to superconducting temperature?
@@ananthropomorphictalkinggo6641 too much to make this kind of a set up worthwhile
@@the_undead exactly.
Thank you great video. I respect your research and keep working on your projects. Thanks. I'm a engineering technician & an inventer with a patent my self. Good work.
Angel Ortega
Angel Ortega i am a mechanical engineer i need a technician like u for help in my project ,my id . ikramakbaralikhanalima@gmail.com or facebook ikramkhan4209@yahoo.com whatsapp 03335656868 me from pakistan ,i am waiting for your response
Very well done mate, good explanation, enjoyed it 😀
Glad you enjoyed the video Steve! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/WmYVFpsWfBc/video.html
Awesome Work on your Details and Most of For the Exposure!
Be sure to check out my other videos and share. Thanks!
Thanks Bro for the info
You're welcome Johnny! Be sure to rate thumbs up, watch my other great "Free Energy" related videos below, and most importantly SHARE my channel with friends. Thanks
czcams.com/video/8GkXl8mAvIQ/video.html
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/5lvFSQ2_4tg/video.html
czcams.com/video/BSdSDfOWbNs/video.html
It works I have built it you just don’t know how to make it. It’s like watching a baby to trying to walk.
Awesomeness, thanks for posting!
Glad you enjoyed the video! Be sure to rate thumbs up, check out my extensive video playlists for other great videos of interest to you, and share. Thanks
Thanks for being honest.GOD BLESS YOU.many many many times over.
You're welcome! Please return the favor by sharing my channel with all your friends. Thank You
Other great videos:
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
czcams.com/video/ErpS7C4gUVA/video.html
I made mine back in 2012, it was interesting seeing the contrast as I used smaller magnets with more spacing and only 1 magnet to drive the wheel, I did enjoy your presentation
Thanks for watching Marshall! Be sure to look over my "Free Energy" scam exposing video playlist below, you'll be amused. :-) Please share.
czcams.com/video/FmcH_69Y_ZY/video.html
I love exposing the scams, keep up the great work!!!
Great to hear. You can support my work by sharing the video link on social networking sites. Thank you!
I clicked on this vid from your channel, thinking that you might be into the Free Energy thing, and I'm so glad that you're debunking this Troll-Science-level nonsense.
Another great YT scam exposed:
czcams.com/video/FmcH_69Y_ZY/video.html
Also be sure to check out my bike generator video below and share. Thanks!
czcams.com/video/8rj-emSUf7I/video.html
Except for Batman, he uses free energy and obviously Superman.
That's great you exposed those fools who are fooling the fools.why would they do things that cheats or fakes
Subscribed because I love how you called bullshit on the other vids! Great work!
Great to hear! Be sure to watch my "Free Energy" scam exposing video playlist below and share. Thanks!
czcams.com/video/FmcH_69Y_ZY/video.html
Thank you for showing us this.
You're welcome! Be sure to watch my "Free Energy" scam exposing video playlist below, and especially my newest video. See if you can guess how the trick was done. :-) Thanks for watching!
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/ZT6dJr6a5kw/video.html
Thanx a lot ur revelation was as mine expected... Keep it up and upload more such videos
thank you !
So True, there is just no such thing as FREE ENERGY. Thanks for sharing,
Please share. Thanks!
that's not what
Tesla implied
Solar is as close to free energy as we can get right now. And even then, the sun is nuclear powered
Love it when science with " Proof " busts CZcams content provided science !
Thanks for creating content showing why someone's scam is a scam .
We have tried many things these content creators have created which failed grossly , so Thank You !
Good job thanks
Thank you. Well done Sir.
Glad you enjoyed the video Paul! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Have you tried fixing the upper magnets, and starting the wheel or table spinning to see what happens? Just interested in knowing what occurs.
Great Vid. One can actually learn a lot by watching a vid like this. I liked it a lot.
Thanks for info GOOD VIDEO..
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/WmYVFpsWfBc/video.html
czcams.com/video/OQ0MNWA1XuQ/video.html
so a small battery running a small motor to the top magnets,
which turn the larger (bottom) wheel , then
which is connected by a belt to a larger generator is, in fact,
a step-up device (and free/functional/real energy).
Thanks mate, people like you helps other not to waste time on bullcrap👌
Glad you enjoyed the video! Be sure to check out my other great videos below and share. Thanks
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/WmYVFpsWfBc/video.html
Thank you for showing me your test.
You're welcome Grant! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks
czcams.com/users/electronicsnmoreplaylists
I have a home-made Tesla car with 7 of these on the roof! I only need to let my car go down the hill of my garage and the wind makes the thing start! Two people in my block are also having claims from the energy company for how low their bills are at the end of the month, and all thanks to this tutorial. Thank you electronicsNmore! You the man! Bring it on!
Thanks for this, science vigilante. Get'em all!
Other videos that you'll greatly enjoy! Please share. Thank you
czcams.com/video/FmcH_69Y_ZY/video.html
And here we can see the first law of thermodynamics in its natural habitat, aka the real world! ;)
The solar system would like a word with you.
Nice video! It's cool when just plain science wins! You put a lot of extra work into it just to prove it too! If this worked wouldn't a bunch of us be doing it to get off the unreliable grid?
You just broke my heart...I believed all of mankind's energy problems were solved !
Honest man, thank you. Please keep it up, we need honest people in the tube, we have thousands of honest people showing how to, videos and I thank them but we always have a few that get a, I do not know what and BS the video, games for little brains. Thank you to all the people in u-tube that put good info on how to do or fix something in the car or home or special projects that someone may want to do. Thank you all, I know it has helped me many,many times, Lol. Many times😁😁😁😁
nice
Thanks great vid and a lot time effort making this thing and proving that its not possible to have perpetual motion
Other great videos you'll enjoy:
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
Please share. Thank you!
Energy conservation, the most basic law of physics, says that perpetual motion is not possible. No proof is necessary.
@@gibbogle Nothing seems possible until proven otherwise. Take a look at what Archangle 4 Truth posted just above. Perhaps he has the answer.
Well made video! Thanks very much as you saved me a lot of time. I was skeptical but not educated enough to totally disregard the claims being made on YT. I guess I don't need to go looking for magnets now. Will have to find a more productive project to pass the winter hours.
Hi Ken! Glad to hear that you appreciated my video, and that I saved you time and money from trying it yourself. Be sure to watch and share my other great "Free Energy" scam exposing videos below. Thanks
czcams.com/video/8GkXl8mAvIQ/video.html
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/5lvFSQ2_4tg/video.html
czcams.com/video/BSdSDfOWbNs/video.html
Did a fantastic job. I have found myself that their are definitely FRAUDS out their. Don't understand why people's want to deceive. INSTEAD of ENLIGHTENED HIS FELLOW MAN. YOU SURE DID!! THANKS FOR SHARING
Great dedication and honesty. Many blessings bro!
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/WmYVFpsWfBc/video.html
czcams.com/video/IjQu_hJv7UU/video.html
thank you sir , God bless you
Glad you enjoyed the video! I have many excellent videos on this channel that cover many different subjects, so be sure to look over my video playlists and most importantly share. Thanks
Well done 👍.
Thank you!
Great explaining sir..👏👏👏
Have you made sure the power cable is connected securely.. ?
excellent video!
Thank u for ur honesty.
Thank you for appreciating the video! Be sure to share this video and my other "Free Energy" videos below with friends.
czcams.com/video/FmcH_69Y_ZY/video.html
Great job sir. There is no free lunch when it comes to producing energy.
Thanks very interesting,Gracias muy interesante .
Please rate thumbs up, share, subscribe, and watch my other great "Free Energy" videos below. Thanks!
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/5lvFSQ2_4tg/video.html
czcams.com/video/BSdSDfOWbNs/video.html
czcams.com/video/IjQu_hJv7UU/video.html
Mucho Goodo!
THANK. YOU. I have tried to explain to people numerous times online that these things will not work - the claimed behavior violates the most basic principles of physics. All I get for my trouble is attacked - at the very least of being closed minded, at worst of being in the pocket of the energy utilities. It's definitely nice to see that there is someone else out there that "gets it." Great job!
You're welcome! I have better "Free Energy" scam exposing videos than this one, so be sure to check out the link below and share. Thanks
czcams.com/video/FmcH_69Y_ZY/video.html
People have been taught physics in a box. Think outside the box. I can’t speak for this video, but Amazon sells small magnetic motors as educational experiments. Magnets installed at a specific angle will give you the maximum amount of push/pull effect to increase horse power. The power cartel in the US will not allow any company to commercialize these motors.
Think about it, if adding power to a coil in a motor creates a magnetic field and turns a motor armature, then replacing that coil with a magnet will also turn that Armature.
@@markhill485 The problem, Mark, is that while there do exist configurations of magnets ideally situated to give you an "energy production stroke," that stroke eventually comes to and end - there is a stable potential energy minimum and the apparatus will eventually reach equilibrium there. And once that happens you have to *use* energy to move the apparatus back to the position in which it's ready to give you another energy stroke.
This is a no win situation - even completely neglecting losses, it requires just as much energy to restore that energy-laden configuration as you get out of by allowing the system to move out of it. You get energy while "the rock rolls downhill" - then you must supply the same amount of energy back to get it back uphill again. And honoring losses, you don't just come out even - you lose.
No one expects that rock to roll back uphill somehow, or for the water that falls through a dam to somehow find its way back behind the dam again (at least not without being evaporated by the sun first). But talk about magnets instead, and people lose their common sense. It's an entirely similar situation - there *is no free energy* and there's simply no way around that. I'm sorry. I really am - I'd love to have such technology too.
The bottom line, universally applicable rule in all situations of this type is "there is no shortcut uphill." You can't get up the hill without investing the energy. The type of physics involved makes no difference.
In the specific case you mention in your reply, the difference between using a coil and using a magnet is that you can alter the amount of current in the coil, and therefore modulate the amount of force. You can turn the current on when it's time for the thing to make a power stroke, and then turn it off when it's time for you to return the system to its original position. THAT lets you do the position restore without investing that energy. However, changing the current in the coil requires electrical work. What you've done is replaced the need for applying mechanical energy with the need for applying electrical energy. You're CONVERTING energy between electrical and mechanical forms - you're not extracting energy from nothing. That's what "just thinking about it" should lead someone to conclude.
By all means - buy the gadget on Amazon and play with it. It's a free country - nothing is stopping you. But you're not going to find success in this endeavor. You may learn a great many things, though, and that is always a good thing.
Thanks, that's very interesting. My father used to be a master electrician and he smiled about these inventions.It will come - but maybe not yet.
Glad you enjoyed the video! You'll also enjoy my "Free energy" scam exposing videos below. Please share. Thank you!
czcams.com/video/FmcH_69Y_ZY/video.html
Thanks for the heads up on this. I hate it when people are so dishonest!😒
You're welcome! For a really good laugh, watch my "Free Energy" video playlist below and share. Thank you!
czcams.com/play/PLQ6IOhUBblU2GIBgWOYhrw0TyYGkyEAWE.html
Great video thanks
Thanks Doug! Glad you enjoyed the video. I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others.
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
Thanks my friend. I say hellow from argentina. I was going to loose toó much time with that sheet.
You're welcome! Be sure to watch my other "Free Energy" scam exposing videos below, and share. Thanks
czcams.com/video/FmcH_69Y_ZY/video.html
Thank you ...
I've often wondered bout this ...
You're welcome! Be sure to share the link with others. Thanks!
Thanks for this video. I learnt something new.
You're welcome! To see other scams exposed, be sure to watch the video playlist below. Thanks!
czcams.com/video/FmcH_69Y_ZY/video.html
Thank you.. you are a life saver.... Believe me ... You are!
Hi Chris. Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Nothing is free, The parts generally cost money and "Time is Money" but it is really awesome that people try to find useful ways to re-purpose previously used stuff instead of letting it kill the land :) Great Job, keep it up :)
Please be sure to check out my extensive video playlists and most importantly share. Thanks!
Hey, maybe we are related.
I did enjoy, but with mine and similar north and south configurations, ( took 3 months to get mine where it acted upon it on resistance) I had to hit 2200 revolutions before it would jump in a positive phase upon it's own, and kept increasing throughout the day on it's own inertia, untill finally my rig wasent able to, or wasent strong enought to maintain that amount of speed, or dissipate the heat quick enough to where the bearings that I used would last long enought to give me enough current to charge a AA battery. I was able to reach my voltage sum, but never was able to reach a desirable amount of current to sustain a constant output given my initial goal for this project. I will say I have a couple more ideas, (one in which you mentioned earlier about a double pole config) but for me the amount of time to try different variables on the front end is something I've had time to try. This project is something I started after the last hurricane that hit our area in florida, and was the basis of my goal.
I do fully believe this is admirable and can be sufficiently enought to drive a fridge or TV (eventually) watching your video gave me a little push to start where I left off.
Wondering if anyone else took the revolving polarity inertia voltage aspect far enough to see a sustaining voltage output...
Anyway....
Good Stuff
Thanks For your help...
You're welcome! Be sure to look over my "Free Energy" scam exposing video playlist below and share. Thanks
czcams.com/video/FmcH_69Y_ZY/video.html
It’s a shame people got to do shit like that on the shows because you know people are really trying to learn something and you’re always going to have an asshole out there it’s just a real shame that people do things like this thanks for exposing that it was greatly appreciated again great video love the way you explain things in detail where anybody could really understand this thank you
I watched thinking you were going to make a generator using wind or some other type of energy. I'm still glad I watched. Of course you have to have some kind of force to rotate one or the other. anyway, Thanks. I enjoyed it.
Glad you enjoyed the video! Be sure to watch my "Free Energy" scam exposing video playlist below, and most importantly share my videos with many others. Thank you
czcams.com/video/FmcH_69Y_ZY/video.html
Is a solar wind machine a perpetual motion machine?
I remember in my fifth grade class the teacher had one in the window which I assumed was a perpetual motion machine that worked
you can still use this technology to make a wind turbine with it.
@@Keifer-D you can give me
Yes, that's good I need to see continue routine
Awesome ! thank you very much. 👍🏻
You're welcome!
Proof of concept is there, materials used are inefficient, airgap is extensive and drag on driver is visibly extensive but awesome job trying to replicate loved watching the video!
Glad you enjoyed it. Be sure to look over my "Free Energy" scam exposing video playlist below and share. Thanks!
czcams.com/video/FmcH_69Y_ZY/video.html
Thank you for your honesty and taking time to show the truth.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Other great videos:
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/0rpaOqGY18M/video.html
czcams.com/video/IjQu_hJv7UU/video.html
czcams.com/video/ErpS7C4gUVA/video.html
Sweet ! I am interested to know what kind of gear ratio you are getting with this system ? If you rotate the 1-single-magnet at about 60 rpm, how many rotations is the horizontal plate getting please ? Thank you.
Thank you sir for exposing another fine example of deception in our society by being truthful thank you again
You're welcome Rob! For a big laugh, be sure to watch my "Free Energy" video playlist below, and share my channel with many others. Thanks
czcams.com/video/FmcH_69Y_ZY/video.html
Thanks
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
czcams.com/video/FmcH_69Y_ZY/video.html
czcams.com/video/8rj-emSUf7I/video.html
czcams.com/video/WmYVFpsWfBc/video.html
czcams.com/video/OQ0MNWA1XuQ/video.html
What you have made could be used as a gearbox with no metal to metal contact. No wear and tear or lubricant needed...
Thank you for saving us the trouble. Very well explained BTW.
Glad you enjoyed the video! I have a video playlist that exposes "Free Energy" scam devices. Be sure to watch and share. Thank you!
czcams.com/video/FmcH_69Y_ZY/video.html
Awesome ... thank you for saving my tonnes of time.
You're welcome!
If this motor worked production of it would be prolific. Thanks for this video.
You're welcome Billy! Be sure to share the video link with others. Thanks
thank for saving me a lot of wasted time and effort good work !
You're welcome! Be sure to check out my wide range of videos below, and most importantly share. Thank you
czcams.com/users/electronicsnmoreplaylists
Thank you - 👍really appreciate that some people get Exposed for their fakes